[Thu Sep 22 07:59:42 2011] Detection parameters:
  Position = (541.1, 667.2) = 7 42 5.84 74 16 31.4
  Extent = 0.5" x 0.5", rotation angle = 2 degrees
  Source counts = 168.4 +/- 13.5
  Background counts = 12.6
  Rate = 0.001 +/- 9e-05

[Thu Sep 22 07:59:44 2011] Off-axis axis estimate = 3.66'
[Thu Sep 22 08:02:33 2011] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:02:33 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Thu Sep 22 08:02:33 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Thu Sep 22 08:02:33 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.73"
[Thu Sep 22 08:02:35 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4.ximg exists
[Thu Sep 22 08:02:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4.csv
[Thu Sep 22 08:02:35 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Sep 22 08:02:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4.csv
[Thu Sep 22 08:02:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10470_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:02:36 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Sep 22 08:02:36 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Sep 22 08:02:36 2011] Fit fullrun_ccd3_acisf10470_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Sep 22 08:03:04 2011] Spatial fit model total counts = 195.466000, observed total counts = 195.000000
[Thu Sep 22 08:03:04 2011] Offset between fit and detection position for source 3 = 0.701309 pixels
[Thu Sep 22 08:03:04 2011] 194.463600 total counts/ 31.561600 bgd. counts: snr = 28.996589
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.701309 pixels
  Position = (541.6, 667.7) = 7 42 5.84 74 16 31.5
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 162.9 +/- 13.9
  Background counts = 31.6
  Rate = 0.001 +/- 0.0001
[Thu Sep 22 08:03:04 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:03:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:03:04 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:03:04 2011] Source does appear to be extended
[Thu Sep 22 08:03:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:03:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:03:50 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Sep 22 08:03:50 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.704
[Thu Sep 22 08:03:50 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.63"
[Thu Sep 22 08:03:54 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4.ximg exists
[Thu Sep 22 08:03:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4.csv
[Thu Sep 22 08:03:54 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Sep 22 08:03:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4.csv
[Thu Sep 22 08:03:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10470_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:03:54 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep 22 08:03:54 2011] fullrun_ccd3_acisf10470_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep 22 08:03:54 2011] Fit fullrun_ccd3_acisf10470_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Sep 22 08:04:14 2011] Spatial fit model total counts = 195.178000, observed total counts = 195.000000
[Thu Sep 22 08:04:14 2011] Offset between fit and detection position for source 3 = 0.004595 pixels
[Thu Sep 22 08:04:14 2011] 194.187900 total counts/ 32.688900 bgd. counts: snr = 28.246828
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004595 pixels
  Position = (541.6, 667.7) = 7 42 5.84 74 16 31.5
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 161.5 +/- 13.9
  Background counts = 32.7
  Rate = 0.001 +/- 0.0001
[Thu Sep 22 08:04:14 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:04:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:04:14 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:04:14 2011] Source does appear to be extended
[Thu Sep 22 08:04:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:09:10 2011] Not overwriting source region fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 08:09:10 2011] Extracting stamp from image fullrun_ccd3_acisf10470_pi14-548_cl_sm2.00.img.gz, (513, 639) - (570, 696)
[Thu Sep 22 08:09:10 2011] Writing fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 08:09:21 2011] ../../acisf10470/products/events/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.evt and ../../acisf10470/products/events/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 08:09:21 2011] Size of ../../acisf10470/products/events/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.evt.gz[events] = 173 counts
[Thu Sep 22 08:09:21 2011] Mean chipx,y = (454.61, 697.76)
[Thu Sep 22 08:09:21 2011] Mean tdetx,y = (4434.24, 3515.61)
[Thu Sep 22 08:09:21 2011] chipx,y range = (434.00-472.00, 677.00-717.00)
[Thu Sep 22 08:09:21 2011] Size of ../../acisf10470/products/events/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 93 counts
[Thu Sep 22 08:09:21 2011] ../../acisf10470/products/images/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.img and ../../acisf10470/products/images/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 08:09:21 2011] ../../acisf10470/products/spectra/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.pi and ../../acisf10470/products/spectra/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 08:09:25 2011] ../../acisf10470/products/lightcurves/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.lc and ../../acisf10470/products/lightcurves/fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 08:09:57 2011] Keeping rmf generated by specextract
[Thu Sep 22 08:09:57 2011] 188.644
[Thu Sep 22 08:10:17 2011] Updating aperture counts using extracted products
[Thu Sep 22 08:10:17 2011] Error reading totcts from fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 08:10:17 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 08:10:17 2011] Using photon index=1.80, rate=0.00114, arf fullrun_ccd3_acisf10470_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 08:10:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 08:10:17 2011] Updating source flux to 1.4e-14