[Thu Sep 22 07:59:41 2011] Detection parameters:
  Position = (781.3, 260.4) = 7 43 16.94 74 8 10.2
  Extent = 2.0" x 1.6", rotation angle = 54 degrees
  Source counts = 322.0 +/- 19.5
  Background counts = 59.0
  Rate = 0.002 +/- 0.0001

[Thu Sep 22 07:59:41 2011] Off-axis axis estimate = 6.32'
[Thu Sep 22 08:02:16 2011] Using EEF radius (= 1.80 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:02:16 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Thu Sep 22 08:02:16 2011] source mask rpix=3.7, npix_max = 68, mask sum = 72, frac = 1.044
[Thu Sep 22 08:02:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.80"
[Thu Sep 22 08:02:19 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 22 08:02:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 08:02:19 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 22 08:02:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 08:02:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:02:29 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 22 08:02:29 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 22 08:02:29 2011] Fit fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 22 08:03:00 2011] Spatial fit model total counts = 323.983000, observed total counts = 324.000000
[Thu Sep 22 08:03:00 2011] Offset between fit and detection position for source 51 = 0.404545 pixels
[Thu Sep 22 08:03:00 2011] 327.589000 total counts/ 134.237000 bgd. counts: snr = 16.688317
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.404545 pixels
  Position = (780.9, 260.6) = 7 43 17.04 74 8 10.0
  Extent = 1.6 (1.3-2.1)", rotation angle = 0
  Source counts = 193.4 +/- 18.1
  Background counts = 134.2
  Rate = 0.001 +/- 0.0001
[Thu Sep 22 08:03:00 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:03:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:03:00 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:03:00 2011] Source does appear to be extended
[Thu Sep 22 08:03:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:03:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:03:46 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Thu Sep 22 08:03:46 2011] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.947
[Thu Sep 22 08:03:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.65"
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 22 08:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 22 08:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 08:03:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 22 08:03:49 2011] Fit fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 22 08:04:12 2011] Spatial fit model total counts = 299.118000, observed total counts = 301.000000
[Thu Sep 22 08:04:12 2011] Offset between fit and detection position for source 51 = 0.349217 pixels
[Thu Sep 22 08:04:12 2011] 304.658000 total counts/ 152.877000 bgd. counts: snr = 12.275702
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.349217 pixels
  Position = (780.6, 260.6) = 7 43 17.08 74 8 10.0
  Extent = 1.4 (1.0-1.8)", rotation angle = 0
  Source counts = 151.8 +/- 17.5
  Background counts = 152.9
  Rate = 0.001 +/- 0.0001
[Thu Sep 22 08:04:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:04:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:04:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:04:12 2011] Source does appear to be extended
[Thu Sep 22 08:04:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:07:14 2011] Not overwriting source region fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.reg
[Thu Sep 22 08:07:14 2011] Extracting stamp from image fullrun_ccd2_acisf10470_pi14-548_cl_sm2.00.img.gz, (718, 198) - (844, 324)
[Thu Sep 22 08:07:14 2011] Writing fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51.gif
[Thu Sep 22 08:07:28 2011] ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.evt and ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_bgd.evt exist, delete to re-create
[Thu Sep 22 08:07:29 2011] Size of ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.evt.gz[events] = 308 counts
[Thu Sep 22 08:07:29 2011] Mean chipx,y = (94.77, 291.86)
[Thu Sep 22 08:07:29 2011] Mean tdetx,y = (3352.86, 3991.23)
[Thu Sep 22 08:07:29 2011] chipx,y range = (68.00-118.00, 267.00-320.00)
[Thu Sep 22 08:07:29 2011] Size of ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_bgd.evt.gz[events] = 233 counts
[Thu Sep 22 08:07:29 2011] ../../acisf10470/products/images/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.img and ../../acisf10470/products/images/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_bgd.img exist, delete to re-create
[Thu Sep 22 08:07:29 2011] ../../acisf10470/products/spectra/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.pi and ../../acisf10470/products/spectra/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_bgd.pi exist, delete to re-create
[Thu Sep 22 08:07:32 2011] ../../acisf10470/products/lightcurves/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.lc and ../../acisf10470/products/lightcurves/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_bgd.lc exist, delete to re-create
[Thu Sep 22 08:09:09 2011] Keeping rmf generated by specextract
[Thu Sep 22 08:09:09 2011] 183.477
[Thu Sep 22 08:10:16 2011] Updating aperture counts using extracted products
[Thu Sep 22 08:10:16 2011] Error reading totcts from fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51_src.pi.gz
[Thu Sep 22 08:10:16 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 08:10:16 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src51.arf
[Thu Sep 22 08:10:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 08:10:16 2011] Updating source flux to 1.3e-14