[Thu Sep 22 07:59:35 2011] Detection parameters:
  Position = (476.7, 624.3) = 7 43 53.79 74 11 8.4
  Extent = 1.0" x 0.6", rotation angle = 57 degrees
  Source counts = 10.8 +/- 3.9
  Background counts = 4.2
  Rate = 8e-05 +/- 3e-05

[Thu Sep 22 07:59:41 2011] Off-axis axis estimate = 6.90'
[Thu Sep 22 08:02:16 2011] Using EEF radius (= 2.12 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:02:16 2011] Initial guess for spatial extent in simple fitting = 2.12"
[Thu Sep 22 08:02:16 2011] source mask rpix=4.3, npix_max = 92, mask sum = 71, frac = 0.767
[Thu Sep 22 08:02:16 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 2.12"
[Thu Sep 22 08:02:26 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29.ximg exists
[Thu Sep 22 08:02:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29.csv
[Thu Sep 22 08:02:26 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29_1.ximg exists
[Thu Sep 22 08:02:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29.csv
[Thu Sep 22 08:02:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10470_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:02:32 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Thu Sep 22 08:02:32 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Sep 22 08:02:32 2011] Fit fullrun_ccd2_acisf10470_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Sep 22 08:03:00 2011] Spatial fit model total counts = 38.878300, observed total counts = 36.000000
[Thu Sep 22 08:03:00 2011] Offset between fit and detection position for source 10 = 1.145972 pixels
[Thu Sep 22 08:03:00 2011] 38.370800 total counts/ 25.966300 bgd. counts: snr = 2.434301
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.145972 pixels
  Position = (477.5, 625.2) = 7 43 53.76 74 11 8.6
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 12.4 +/- 6.2
  Background counts = 26.0
  Rate = 9e-05 +/- 4e-05
[Thu Sep 22 08:03:00 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:03:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:03:00 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:03:00 2011] Source does appear to be extended
[Thu Sep 22 08:03:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:03:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:03:46 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Thu Sep 22 08:03:46 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.904
[Thu Sep 22 08:03:46 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.53"
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28.ximg exists
[Thu Sep 22 08:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28.csv
[Thu Sep 22 08:03:49 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28_1.ximg exists
[Thu Sep 22 08:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28.csv
[Thu Sep 22 08:03:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10470_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:03:50 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Thu Sep 22 08:03:50 2011] fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Sep 22 08:03:50 2011] Fit fullrun_ccd2_acisf10470_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Sep 22 08:04:12 2011] Spatial fit model total counts = 20.598400, observed total counts = 19.000000
[Thu Sep 22 08:04:12 2011] Offset between fit and detection position for source 10 = 0.056924 pixels
[Thu Sep 22 08:04:12 2011] 20.047380 total counts/ 9.198480 bgd. counts: snr = 3.577072
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.056924 pixels
  Position = (477.4, 625.2) = 7 43 53.76 74 11 8.6
  Extent = 0.5 (0.2-0.8)", rotation angle = 0
  Source counts = 10.8 +/- 4.5
  Background counts = 9.2
  Rate = 8e-05 +/- 3e-05
[Thu Sep 22 08:04:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:04:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:04:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:04:12 2011] Source does appear to be extended
[Thu Sep 22 08:04:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:07:16 2011] Not overwriting source region fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.reg
[Thu Sep 22 08:07:16 2011] Extracting stamp from image fullrun_ccd2_acisf10470_pi14-548_cl_sm2.00.img.gz, (456, 603) - (499, 647)
[Thu Sep 22 08:07:16 2011] Writing fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10.gif
[Thu Sep 22 08:09:01 2011] ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.evt and ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Sep 22 08:09:01 2011] Size of ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Thu Sep 22 08:09:01 2011] Mean chipx,y = (576.92, 266.67)
[Thu Sep 22 08:09:01 2011] Mean tdetx,y = (3327.67, 3509.08)
[Thu Sep 22 08:09:01 2011] chipx,y range = (555.00-579.00, 241.00-271.00)
[Thu Sep 22 08:09:01 2011] Size of ../../acisf10470/products/events/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 19 counts
[Thu Sep 22 08:09:01 2011] ../../acisf10470/products/images/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.img and ../../acisf10470/products/images/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Sep 22 08:09:01 2011] ../../acisf10470/products/spectra/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.pi and ../../acisf10470/products/spectra/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Sep 22 08:09:01 2011] Not generating rmf since there are only 10 counts
[Thu Sep 22 08:09:04 2011] ../../acisf10470/products/lightcurves/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.lc and ../../acisf10470/products/lightcurves/fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Sep 22 08:09:09 2011] 176.985
[Thu Sep 22 08:10:16 2011] Updating aperture counts using extracted products
[Thu Sep 22 08:10:16 2011] Error reading totcts from fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Sep 22 08:10:17 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 08:10:17 2011] Using photon index=1.80, rate=7.64e-05, arf fullrun_ccd2_acisf10470_pi14-548_pass1_cl_src10.arf
[Thu Sep 22 08:10:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 08:10:17 2011] Updating source flux to 1e-15
[Thu Sep 22 08:10:27 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting