[Thu Sep 22 07:59:30 2011] Detection parameters:
  Position = (594.0, 1072.5) = 7 42 25.74 74 8 3.3
  Extent = 1.6" x 0.8", rotation angle = 95 degrees
  Source counts = 65.0 +/- 8.9
  Background counts = 14.0
  Rate = 0.0005 +/- 6e-05

[Thu Sep 22 07:59:32 2011] Off-axis axis estimate = 4.92'
[Thu Sep 22 08:02:06 2011] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:02:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 08:02:06 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Thu Sep 22 08:02:06 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.933
[Thu Sep 22 08:02:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.15"
[Thu Sep 22 08:02:07 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 08:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 08:02:07 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 08:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 08:02:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10470_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:02:07 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 08:02:07 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 08:02:07 2011] Fit fullrun_ccd0_acisf10470_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 08:02:50 2011] Spatial fit model total counts = 80.034900, observed total counts = 81.000000
[Thu Sep 22 08:02:50 2011] Offset between fit and detection position for source 1 = 1.039549 pixels
[Thu Sep 22 08:02:50 2011] 79.452010 total counts/ 6.326610 bgd. counts: snr = 29.072523
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.039549 pixels
  Position = (594.3, 1073.5) = 7 42 25.77 74 8 3.6
  Extent = 1.6 (1.1-2.0)", rotation angle = 0
  Source counts = 73.1 +/- 8.9
  Background counts = 6.3
  Rate = 0.0005 +/- 6e-05
[Thu Sep 22 08:02:50 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:02:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:02:50 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:02:50 2011] Source does appear to be extended
[Thu Sep 22 08:02:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:03:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 08:03:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 08:03:35 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Thu Sep 22 08:03:35 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.879
[Thu Sep 22 08:03:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.59"
[Thu Sep 22 08:03:38 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 08:03:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 08:03:38 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 08:03:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 08:03:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10470_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 08:03:39 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 08:03:39 2011] fullrun_ccd0_acisf10470_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 08:03:39 2011] Fit fullrun_ccd0_acisf10470_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 08:04:06 2011] Spatial fit model total counts = 103.993000, observed total counts = 104.000000
[Thu Sep 22 08:04:06 2011] Offset between fit and detection position for source 1 = 0.427016 pixels
[Thu Sep 22 08:04:06 2011] 105.026300 total counts/ 45.767200 bgd. counts: snr = 8.759471
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.427016 pixels
  Position = (594.2, 1073.1) = 7 42 25.78 74 8 3.4
  Extent = 1.3 (1.0-1.7)", rotation angle = 0
  Source counts = 59.3 +/- 10.2
  Background counts = 45.8
  Rate = 0.0004 +/- 7e-05
[Thu Sep 22 08:04:06 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 08:04:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 08:04:06 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 08:04:06 2011] Source does appear to be extended
[Thu Sep 22 08:04:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 08:04:41 2011] Not overwriting source region fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 08:04:41 2011] Extracting stamp from image fullrun_ccd0_acisf10470_pi14-548_cl_sm2.00.img.gz, (534, 1013) - (654, 1133)
[Thu Sep 22 08:04:41 2011] Writing fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 08:04:43 2011] ../../acisf10470/products/events/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.evt and ../../acisf10470/products/events/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 08:04:43 2011] Size of ../../acisf10470/products/events/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.evt.gz[events] = 83 counts
[Thu Sep 22 08:04:43 2011] Mean chipx,y = (877.52, 629.08)
[Thu Sep 22 08:04:43 2011] Mean tdetx,y = (3690.08, 4254.48)
[Thu Sep 22 08:04:43 2011] chipx,y range = (857.00-901.00, 606.00-650.00)
[Thu Sep 22 08:04:43 2011] Size of ../../acisf10470/products/events/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 252 counts
[Thu Sep 22 08:04:43 2011] ../../acisf10470/products/images/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.img and ../../acisf10470/products/images/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 08:04:43 2011] ../../acisf10470/products/spectra/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.pi and ../../acisf10470/products/spectra/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 08:04:43 2011] Not generating rmf since there are only 59 counts
[Thu Sep 22 08:04:46 2011] ../../acisf10470/products/lightcurves/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.lc and ../../acisf10470/products/lightcurves/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 08:05:43 2011] 191.381
[Thu Sep 22 08:10:15 2011] Updating aperture counts using extracted products
[Thu Sep 22 08:10:15 2011] Error reading totcts from fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 08:10:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 08:10:15 2011] Using photon index=1.80, rate=0.000417, arf fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 08:10:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 08:10:15 2011] Updating source flux to 4.9e-15
[Thu Sep 22 08:10:23 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 22 08:10:26 2011] acisf10470/analysis//spectral/fullrun_ccd0_acisf10470_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete