[Fri Oct  7 11:47:53 2011] Detection parameters:
  Position = (1210.7, 667.2) = 7 42 11.53 74 11 33.6
  Extent = 0.7" x 0.5", rotation angle = 93 degrees
  Source counts = 29.4 +/- 5.7
  Background counts = 3.6
  Rate = 0.0003 +/- 6e-05

[Fri Oct  7 11:47:55 2011] Off-axis axis estimate = 1.96'
[Fri Oct  7 11:49:18 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:49:18 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Oct  7 11:49:18 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.206
[Fri Oct  7 11:49:18 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.43"
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 11:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 11:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 11:49:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 11:49:21 2011] Fit fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 11:49:38 2011] Spatial fit model total counts = 38.914100, observed total counts = 41.000000
[Fri Oct  7 11:49:38 2011] Offset between fit and detection position for source 4 = 0.812134 pixels
[Fri Oct  7 11:49:38 2011] 37.815100 total counts/ 10.917800 bgd. counts: snr = 8.140313
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.812134 pixels
  Position = (1210.9, 668.0) = 7 42 11.56 74 11 33.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 26.9 +/- 6.1
  Background counts = 10.9
  Rate = 0.0003 +/- 7e-05
[Fri Oct  7 11:49:38 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:49:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:49:38 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:49:38 2011] Source does appear to be extended
[Fri Oct  7 11:49:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:50:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:50:06 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Oct  7 11:50:06 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.302
[Fri Oct  7 11:50:06 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.50"
[Fri Oct  7 11:50:07 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 11:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 11:50:07 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 11:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 11:50:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:50:08 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 11:50:08 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 11:50:08 2011] Fit fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 11:50:27 2011] Spatial fit model total counts = 41.073700, observed total counts = 42.000000
[Fri Oct  7 11:50:27 2011] Offset between fit and detection position for source 4 = 0.049212 pixels
[Fri Oct  7 11:50:27 2011] 40.360400 total counts/ 13.840200 bgd. counts: snr = 7.128622
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.049212 pixels
  Position = (1210.9, 668.0) = 7 42 11.56 74 11 33.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 26.5 +/- 6.4
  Background counts = 13.8
  Rate = 0.0003 +/- 7e-05
[Fri Oct  7 11:50:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:50:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:50:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:50:27 2011] Source does appear to be extended
[Fri Oct  7 11:50:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:52:19 2011] Not overwriting source region fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.reg
[Fri Oct  7 11:52:19 2011] Extracting stamp from image fullrun_ccd2_acisf10469_pi14-548_cl_sm2.00.img.gz, (1188, 646) - (1233, 690)
[Fri Oct  7 11:52:19 2011] Writing fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4.gif
[Fri Oct  7 11:52:49 2011] ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.evt and ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct  7 11:52:49 2011] Size of ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.evt.gz[events] = 29 counts
[Fri Oct  7 11:52:49 2011] Mean chipx,y = (153.76, 847.07)
[Fri Oct  7 11:52:49 2011] Mean tdetx,y = (3908.07, 3932.24)
[Fri Oct  7 11:52:49 2011] chipx,y range = (139.00-173.00, 831.00-863.00)
[Fri Oct  7 11:52:49 2011] Size of ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 33 counts
[Fri Oct  7 11:52:49 2011] ../../acisf10469/products/images/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.img and ../../acisf10469/products/images/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct  7 11:52:50 2011] ../../acisf10469/products/spectra/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.pi and ../../acisf10469/products/spectra/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct  7 11:52:50 2011] Not generating rmf since there are only 26 counts
[Fri Oct  7 11:52:52 2011] ../../acisf10469/products/lightcurves/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.lc and ../../acisf10469/products/lightcurves/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct  7 11:53:24 2011] 197.114
[Fri Oct  7 11:54:17 2011] Updating aperture counts using extracted products
[Fri Oct  7 11:54:17 2011] Error reading totcts from fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct  7 11:54:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 11:54:17 2011] Using photon index=1.80, rate=0.000284, arf fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src4.arf
[Fri Oct  7 11:54:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 11:54:17 2011] Updating source flux to 3.3e-15
[Fri Oct  7 11:54:33 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting