[Fri Oct  7 11:47:53 2011] Detection parameters:
  Position = (188.3, 741.1) = 7 44 14.72 74 12 7.5
  Extent = 3.6" x 2.5", rotation angle = 70 degrees
  Source counts = 541.5 +/- 25.3
  Background counts = 98.5
  Rate = 0.006 +/- 0.0003

[Fri Oct  7 11:47:55 2011] Off-axis axis estimate = 9.06'
[Fri Oct  7 11:49:18 2011] Using EEF radius (= 3.63 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:49:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 11:49:18 2011] Initial guess for spatial extent in simple fitting = 3.63"
[Fri Oct  7 11:49:18 2011] source mask rpix=7.4, npix_max = 248, mask sum = 256, frac = 1.030
[Fri Oct  7 11:49:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.63"
[Fri Oct  7 11:49:20 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 11:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 11:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 11:49:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10469_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 11:49:21 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 11:49:21 2011] Fit fullrun_ccd2_acisf10469_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 11:49:38 2011] Spatial fit model total counts = 675.055000, observed total counts = 676.000000
[Fri Oct  7 11:49:38 2011] Offset between fit and detection position for source 1 = 0.183709 pixels
[Fri Oct  7 11:49:38 2011] 675.658000 total counts/ 145.520000 bgd. counts: snr = 43.946834
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.183709 pixels
  Position = (188.2, 741.3) = 7 44 14.79 74 12 7.3
  Extent = 3.1 (2.9-3.4)", rotation angle = 0
  Source counts = 530.1 +/- 26.0
  Background counts = 145.5
  Rate = 0.006 +/- 0.0003
[Fri Oct  7 11:49:38 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:49:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:49:38 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:49:38 2011] Source does appear to be extended
[Fri Oct  7 11:49:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:50:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:50:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 11:50:06 2011] Initial guess for spatial extent in simple fitting = 3.14"
[Fri Oct  7 11:50:06 2011] source mask rpix=6.4, npix_max = 189, mask sum = 196, frac = 1.036
[Fri Oct  7 11:50:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.14"
[Fri Oct  7 11:50:07 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 11:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 11:50:07 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 11:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 11:50:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10469_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:50:08 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 11:50:08 2011] fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 11:50:08 2011] Fit fullrun_ccd2_acisf10469_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 11:50:27 2011] Spatial fit model total counts = 639.264000, observed total counts = 642.000000
[Fri Oct  7 11:50:27 2011] Offset between fit and detection position for source 1 = 0.125140 pixels
[Fri Oct  7 11:50:27 2011] 640.456000 total counts/ 111.390000 bgd. counts: snr = 50.128736
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.125140 pixels
  Position = (188.0, 741.3) = 7 44 14.80 74 12 7.4
  Extent = 3.2 (2.9-3.4)", rotation angle = 0
  Source counts = 529.1 +/- 25.3
  Background counts = 111.4
  Rate = 0.006 +/- 0.0003
[Fri Oct  7 11:50:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:50:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:50:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:50:27 2011] Source does appear to be extended
[Fri Oct  7 11:50:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:52:19 2011] Not overwriting source region fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 11:52:19 2011] Extracting stamp from image fullrun_ccd2_acisf10469_pi14-548_cl_sm2.00.img.gz, (44, 597) - (332, 885)
[Fri Oct  7 11:52:19 2011] Writing fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 11:52:20 2011] ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.evt and ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 11:52:20 2011] Size of ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.evt.gz[events] = 626 counts
[Fri Oct  7 11:52:20 2011] Mean chipx,y = (869.26, 108.21)
[Fri Oct  7 11:52:20 2011] Mean tdetx,y = (3169.21, 3216.74)
[Fri Oct  7 11:52:20 2011] chipx,y range = (836.00-906.00, 68.00-144.00)
[Fri Oct  7 11:52:20 2011] Size of ../../acisf10469/products/events/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 728 counts
[Fri Oct  7 11:52:20 2011] ../../acisf10469/products/images/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.img and ../../acisf10469/products/images/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 11:52:20 2011] ../../acisf10469/products/spectra/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.pi and ../../acisf10469/products/spectra/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 11:52:23 2011] ../../acisf10469/products/lightcurves/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.lc and ../../acisf10469/products/lightcurves/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 11:53:24 2011] Keeping rmf generated by specextract
[Fri Oct  7 11:53:24 2011] 157.429
[Fri Oct  7 11:54:17 2011] Updating aperture counts using extracted products
[Fri Oct  7 11:54:17 2011] Error reading totcts from fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 11:54:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 11:54:17 2011] Using photon index=1.80, rate=0.00567, arf fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 11:54:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 11:54:17 2011] Updating source flux to 8.6e-14
[Fri Oct  7 11:54:56 2011] Reading fit data from acisf10469/analysis//spectral/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 11:54:56 2011] Spectral fit parameter nH value = 5.39714e+21
[Fri Oct  7 11:54:56 2011] Spectral fit parameter PhoIndex value = 1.86229
[Fri Oct  7 11:54:56 2011] Failed to get F(0.3-8.0) from acisf10469/analysis//spectral/fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 11:54:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 11:54:56 2011] Using Nh = 5.4e+21, photon index=1.86, rate=0.00567, arf fullrun_ccd2_acisf10469_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 11:54:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 11:54:56 2011] Updating source flux to 8.7e-14