[Fri Oct  7 11:47:51 2011] Detection parameters:
  Position = (1124.3, 952.9) = 7 39 23.64 74 12 50.6
  Extent = 1.3" x 0.8", rotation angle = 141 degrees
  Source counts = 115.7 +/- 14.0
  Background counts = 80.3
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 11:47:52 2011] Off-axis axis estimate = 10.84'
[Fri Oct  7 11:49:17 2011] Using EEF radius (= 5.22 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:49:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 11:49:17 2011] Initial guess for spatial extent in simple fitting = 5.22"
[Fri Oct  7 11:49:17 2011] source mask rpix=10.6, npix_max = 493, mask sum = 467, frac = 0.946
[Fri Oct  7 11:49:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.22"
[Fri Oct  7 11:49:17 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 11:49:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 11:49:17 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 11:49:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 11:49:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10469_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:49:18 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 11:49:18 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 11:49:18 2011] Fit fullrun_ccd1_acisf10469_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 11:49:35 2011] Spatial fit model total counts = 353.366000, observed total counts = 354.000000
[Fri Oct  7 11:49:35 2011] Offset between fit and detection position for source 1 = 2.061742 pixels
[Fri Oct  7 11:49:35 2011] 352.668000 total counts/ 221.268000 bgd. counts: snr = 8.833566
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.061742 pixels
  Position = (1123.6, 954.9) = 7 39 23.78 74 12 51.3
  Extent = 3.7 (2.8-4.5)", rotation angle = 0
  Source counts = 131.4 +/- 18.8
  Background counts = 221.3
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 11:49:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:49:35 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:49:35 2011] Source does appear to be extended
[Fri Oct  7 11:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:50:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 11:50:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 11:50:05 2011] Initial guess for spatial extent in simple fitting = 3.69"
[Fri Oct  7 11:50:05 2011] source mask rpix=7.5, npix_max = 256, mask sum = 245, frac = 0.957
[Fri Oct  7 11:50:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.69"
[Fri Oct  7 11:50:05 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 11:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 11:50:05 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 11:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 11:50:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10469_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:50:06 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 11:50:06 2011] fullrun_ccd1_acisf10469_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 11:50:06 2011] Fit fullrun_ccd1_acisf10469_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 11:50:19 2011] Spatial fit model total counts = 255.948000, observed total counts = 259.000000
[Fri Oct  7 11:50:19 2011] Offset between fit and detection position for source 1 = 0.264985 pixels
[Fri Oct  7 11:50:19 2011] 255.470000 total counts/ 144.667000 bgd. counts: snr = 9.212273
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.264985 pixels
  Position = (1123.4, 955.0) = 7 39 23.80 74 12 51.4
  Extent = 3.1 (2.4-3.9)", rotation angle = 0
  Source counts = 110.8 +/- 16.0
  Background counts = 144.7
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 11:50:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:50:19 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:50:19 2011] Source does appear to be extended
[Fri Oct  7 11:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:51:33 2011] Not overwriting source region fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 11:51:33 2011] Extracting stamp from image fullrun_ccd1_acisf10469_pi14-548_cl_sm2.00.img.gz, (981, 813) - (1266, 1097)
[Fri Oct  7 11:51:33 2011] Writing fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 11:51:35 2011] ../../acisf10469/products/events/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.evt and ../../acisf10469/products/events/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 11:51:35 2011] Size of ../../acisf10469/products/events/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.evt.gz[events] = 208 counts
[Fri Oct  7 11:51:35 2011] Mean chipx,y = (589.25, 46.84)
[Fri Oct  7 11:51:35 2011] Mean tdetx,y = (5085.16, 4696.25)
[Fri Oct  7 11:51:35 2011] chipx,y range = (552.00-624.00, 10.00-78.00)
[Fri Oct  7 11:51:35 2011] Size of ../../acisf10469/products/events/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 451 counts
[Fri Oct  7 11:51:35 2011] ../../acisf10469/products/images/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.img and ../../acisf10469/products/images/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 11:51:35 2011] ../../acisf10469/products/spectra/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.pi and ../../acisf10469/products/spectra/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 11:51:38 2011] ../../acisf10469/products/lightcurves/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.lc and ../../acisf10469/products/lightcurves/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 11:52:19 2011] Keeping rmf generated by specextract
[Fri Oct  7 11:52:19 2011] 155.679
[Fri Oct  7 11:54:16 2011] Updating aperture counts using extracted products
[Fri Oct  7 11:54:16 2011] Error reading totcts from fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 11:54:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 11:54:17 2011] Using photon index=1.80, rate=0.00119, arf fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 11:54:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 11:54:17 2011] Updating source flux to 1.8e-14
[Fri Oct  7 11:54:33 2011] Reading fit data from acisf10469/analysis//spectral/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 11:54:33 2011] Spectral fit parameter nH value = 3.0664e+15
[Fri Oct  7 11:54:33 2011] Spectral fit parameter PhoIndex value = 1.66212
[Fri Oct  7 11:54:33 2011] Failed to get F(0.3-8.0) from acisf10469/analysis//spectral/fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 11:54:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 11:54:33 2011] Using Nh = 3.1e+15, photon index=1.66, rate=0.00119, arf fullrun_ccd1_acisf10469_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 11:54:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 11:54:33 2011] Updating source flux to 1.9e-14