[Thu Oct 20 08:01:07 2011] Detection parameters:
  Position = (260.3, 705.0) = 7 42 5.89 74 16 31.1
  Extent = 0.5" x 0.5", rotation angle = 103 degrees
  Source counts = 53.6 +/- 7.5
  Background counts = 2.4
  Rate = 0.001 +/- 0.0002

[Thu Oct 20 08:01:08 2011] Off-axis axis estimate = 2.69'
[Thu Oct 20 08:02:00 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 08:02:00 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Oct 20 08:02:00 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.228
[Thu Oct 20 08:02:00 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.52"
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5.ximg exists
[Thu Oct 20 08:02:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5.csv
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Oct 20 08:02:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5.csv
[Thu Oct 20 08:02:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Oct 20 08:02:01 2011] Fit fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Oct 20 08:02:11 2011] Spatial fit model total counts = 56.925700, observed total counts = 60.000000
[Thu Oct 20 08:02:11 2011] Offset between fit and detection position for source 5 = 0.613266 pixels
[Thu Oct 20 08:02:11 2011] 57.823070 total counts/ 4.992870 bgd. counts: snr = 23.643247
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.613266 pixels
  Position = (260.8, 705.5) = 7 42 5.90 74 16 31.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 52.8 +/- 7.6
  Background counts = 5.0
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 08:02:11 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 08:02:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 08:02:11 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 08:02:11 2011] Source does appear to be extended
[Thu Oct 20 08:02:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 08:02:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 08:02:30 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Oct 20 08:02:30 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.074
[Thu Oct 20 08:02:30 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.47"
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct 20 08:02:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5.csv
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct 20 08:02:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5.csv
[Thu Oct 20 08:02:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct 20 08:02:31 2011] Fit fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Oct 20 08:02:39 2011] Spatial fit model total counts = 58.272600, observed total counts = 60.000000
[Thu Oct 20 08:02:39 2011] Offset between fit and detection position for source 5 = 0.012988 pixels
[Thu Oct 20 08:02:39 2011] 59.108850 total counts/ 7.217750 bgd. counts: snr = 19.314878
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.012988 pixels
  Position = (260.8, 705.5) = 7 42 5.90 74 16 31.1
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 51.9 +/- 7.7
  Background counts = 7.2
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 08:02:39 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 08:02:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 08:02:39 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 08:02:39 2011] Source does appear to be extended
[Thu Oct 20 08:02:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 08:05:01 2011] Not overwriting source region fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.reg
[Thu Oct 20 08:05:01 2011] Extracting stamp from image fullrun_ccd3_acisf10468_pi14-548_cl_sm2.00.img.gz, (241, 685) - (281, 726)
[Thu Oct 20 08:05:01 2011] Writing fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5.gif
[Thu Oct 20 08:05:12 2011] ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.evt and ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct 20 08:05:12 2011] Size of ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.evt.gz[events] = 55 counts
[Thu Oct 20 08:05:12 2011] Mean chipx,y = (314.75, 885.22)
[Thu Oct 20 08:05:12 2011] Mean tdetx,y = (4246.78, 3375.75)
[Thu Oct 20 08:05:12 2011] chipx,y range = (298.00-331.00, 867.00-904.00)
[Thu Oct 20 08:05:12 2011] Size of ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 17 counts
[Thu Oct 20 08:05:12 2011] ../../acisf10468/products/images/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.img and ../../acisf10468/products/images/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct 20 08:05:12 2011] ../../acisf10468/products/spectra/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.pi and ../../acisf10468/products/spectra/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Oct 20 08:05:12 2011] Not generating rmf since there are only 51 counts
[Thu Oct 20 08:05:15 2011] ../../acisf10468/products/lightcurves/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.lc and ../../acisf10468/products/lightcurves/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct 20 08:05:25 2011] 192.27
[Thu Oct 20 08:05:32 2011] Updating aperture counts using extracted products
[Thu Oct 20 08:05:32 2011] Error reading totcts from fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct 20 08:05:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 08:05:32 2011] Using photon index=1.80, rate=0.00113, arf fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src5.arf
[Thu Oct 20 08:05:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 08:05:32 2011] Updating source flux to 1.4e-14
[Thu Oct 20 08:05:40 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting