[Thu Oct 20 08:01:07 2011] Detection parameters:
  Position = (628.5, 671.9) = 7 41 21.35 74 16 14.5
  Extent = 0.5" x 0.5", rotation angle = 146 degrees
  Source counts = 63.8 +/- 8.2
  Background counts = 3.2
  Rate = 0.001 +/- 0.0002

[Thu Oct 20 08:01:08 2011] Off-axis axis estimate = 3.93'
[Thu Oct 20 08:02:00 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 08:02:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 08:02:00 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Thu Oct 20 08:02:00 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.088
[Thu Oct 20 08:02:00 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.81"
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4.ximg exists
[Thu Oct 20 08:02:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Oct 20 08:02:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 08:02:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10468_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Oct 20 08:02:01 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Oct 20 08:02:01 2011] Fit fullrun_ccd3_acisf10468_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Oct 20 08:02:11 2011] Spatial fit model total counts = 71.843800, observed total counts = 72.000000
[Thu Oct 20 08:02:11 2011] Offset between fit and detection position for source 4 = 0.980209 pixels
[Thu Oct 20 08:02:11 2011] 72.430850 total counts/ 9.124050 bgd. counts: snr = 20.958323
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.980209 pixels
  Position = (629.2, 672.6) = 7 41 21.32 74 16 14.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 63.3 +/- 8.5
  Background counts = 9.1
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 08:02:11 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 08:02:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 08:02:11 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 08:02:11 2011] Source does appear to be extended
[Thu Oct 20 08:02:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 08:02:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 08:02:30 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Thu Oct 20 08:02:30 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Thu Oct 20 08:02:30 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.66"
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4.ximg exists
[Thu Oct 20 08:02:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Oct 20 08:02:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 08:02:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10468_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Oct 20 08:02:31 2011] fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Oct 20 08:02:31 2011] Fit fullrun_ccd3_acisf10468_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Oct 20 08:02:39 2011] Spatial fit model total counts = 71.442000, observed total counts = 72.000000
[Thu Oct 20 08:02:39 2011] Offset between fit and detection position for source 4 = 0.017051 pixels
[Thu Oct 20 08:02:39 2011] 70.726880 total counts/ 6.970180 bgd. counts: snr = 24.149260
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.017051 pixels
  Position = (629.2, 672.6) = 7 41 21.32 74 16 14.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 63.8 +/- 8.4
  Background counts = 7.0
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 08:02:39 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 08:02:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 08:02:39 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 08:02:39 2011] Source does appear to be extended
[Thu Oct 20 08:02:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 08:05:01 2011] Not overwriting source region fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.reg
[Thu Oct 20 08:05:01 2011] Extracting stamp from image fullrun_ccd3_acisf10468_pi14-548_cl_sm2.00.img.gz, (599, 642) - (660, 703)
[Thu Oct 20 08:05:01 2011] Writing fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4.gif
[Thu Oct 20 08:05:09 2011] ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.evt and ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Thu Oct 20 08:05:09 2011] Size of ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.evt.gz[events] = 67 counts
[Thu Oct 20 08:05:09 2011] Mean chipx,y = (494.18, 561.27)
[Thu Oct 20 08:05:09 2011] Mean tdetx,y = (4570.73, 3555.18)
[Thu Oct 20 08:05:09 2011] chipx,y range = (477.00-515.00, 544.00-579.00)
[Thu Oct 20 08:05:09 2011] Size of ../../acisf10468/products/events/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 35 counts
[Thu Oct 20 08:05:09 2011] ../../acisf10468/products/images/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.img and ../../acisf10468/products/images/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Thu Oct 20 08:05:09 2011] ../../acisf10468/products/spectra/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.pi and ../../acisf10468/products/spectra/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Thu Oct 20 08:05:09 2011] Not generating rmf since there are only 63 counts
[Thu Oct 20 08:05:12 2011] ../../acisf10468/products/lightcurves/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.lc and ../../acisf10468/products/lightcurves/fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Thu Oct 20 08:05:25 2011] 183.735
[Thu Oct 20 08:05:32 2011] Updating aperture counts using extracted products
[Thu Oct 20 08:05:32 2011] Error reading totcts from fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Oct 20 08:05:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 08:05:32 2011] Using photon index=1.80, rate=0.00139, arf fullrun_ccd3_acisf10468_pi14-548_pass1_cl_src4.arf
[Thu Oct 20 08:05:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 08:05:32 2011] Updating source flux to 1.8e-14
[Thu Oct 20 08:05:40 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting