[Fri Oct 14 23:53:36 2011] Detection parameters:
  Position = (422.3, 211.0) = 1 7 42.13 1 0 1.5
  Extent = 9.2" x 6.5", rotation angle = 160 degrees
  Source counts = 73.9 +/- 13.9
  Background counts = 118.1
  Rate = 0.002 +/- 0.0003

[Fri Oct 14 23:53:36 2011] Off-axis axis estimate = 14.41'
[Fri Oct 14 23:54:42 2011] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:54:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:54:42 2011] Initial guess for spatial extent in simple fitting = 9.37"
[Fri Oct 14 23:54:42 2011] source mask rpix=19.1, npix_max = 1529, mask sum = 1560, frac = 1.020
[Fri Oct 14 23:54:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.37"
[Fri Oct 14 23:54:42 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 23:54:42 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 23:54:42 2011] Fit fullrun_ccd3_acisf10465_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct 14 23:54:42 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 23:54:42 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:54:42 2011] Fit fullrun_ccd3_acisf10465_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 23:55:03 2011] Spatial fit model total counts = 409.826000, observed total counts = 375.000000
[Fri Oct 14 23:55:03 2011] Offset between fit and detection position for source 1 = 3.622674 pixels
[Fri Oct 14 23:55:03 2011] 410.029000 total counts/ 263.937000 bgd. counts: snr = 8.992414
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.622674 pixels
  Position = (425.9, 210.6) = 1 7 42.03 1 0 1.1
  Extent = 11.7 (8.7-17.2)", rotation angle = 0
  Source counts = 146.1 +/- 20.2
  Background counts = 263.9
  Rate = 0.003 +/- 0.0004
[Fri Oct 14 23:55:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:55:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:55:03 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:55:03 2011] Source does appear to be extended
[Fri Oct 14 23:55:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:55:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:55:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:55:28 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Fri Oct 14 23:55:28 2011] source mask rpix=23.7, npix_max = 2349, mask sum = 2352, frac = 1.001
[Fri Oct 14 23:55:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.68"
[Fri Oct 14 23:55:28 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 23:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:55:28 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 23:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10465_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:55:28 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 23:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 23:55:28 2011] fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 23:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10465_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:55:33 2011] Spatial fit model total counts = 568.231000, observed total counts = 481.000000
[Fri Oct 14 23:55:33 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 23:55:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:55:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:55:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:55:33 2011] Source does appear to be extended
[Fri Oct 14 23:55:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:55:51 2011] Not overwriting source region fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 23:55:51 2011] Extracting stamp from image fullrun_ccd3_acisf10465_pi14-548_cl_sm2.00.img.gz, (0, 0) - (960, 745)
[Fri Oct 14 23:55:51 2011] Writing fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 23:55:52 2011] ../../acisf10465/products/events/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.evt and ../../acisf10465/products/events/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 23:55:52 2011] Size of ../../acisf10465/products/events/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.evt.gz[events] = 427 counts
[Fri Oct 14 23:55:52 2011] Mean chipx,y = (606.12, 64.30)
[Fri Oct 14 23:55:52 2011] Mean tdetx,y = (5067.70, 3667.12)
[Fri Oct 14 23:55:52 2011] chipx,y range = (497.00-713.00, 3.00-157.00)
[Fri Oct 14 23:55:52 2011] Size of ../../acisf10465/products/events/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2262 counts
[Fri Oct 14 23:55:52 2011] ../../acisf10465/products/images/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.img and ../../acisf10465/products/images/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 23:55:52 2011] ../../acisf10465/products/spectra/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.pi and ../../acisf10465/products/spectra/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 23:55:55 2011] ../../acisf10465/products/lightcurves/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.lc and ../../acisf10465/products/lightcurves/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 23:56:08 2011] Keeping rmf generated by specextract
[Fri Oct 14 23:56:08 2011] 99.4718
[Fri Oct 14 23:57:36 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:57:36 2011] Error reading totcts from fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 23:57:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:57:37 2011] Using photon index=1.80, rate=0.00299, arf fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 23:57:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:57:37 2011] Updating source flux to 6.8e-14
[Fri Oct 14 23:57:39 2011] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Oct 14 23:57:45 2011] Reading fit data from acisf10465/analysis//spectral/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 14 23:57:45 2011] Spectral fit parameter nH value = 2.02215e+14
[Fri Oct 14 23:57:45 2011] Spectral fit parameter PhoIndex value = 0.907959
[Fri Oct 14 23:57:45 2011] Failed to get F(0.3-8.0) from acisf10465/analysis//spectral/fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 23:57:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:57:45 2011] Using Nh = 2e+14, photon index=0.91, rate=0.00299, arf fullrun_ccd3_acisf10465_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 23:57:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:57:45 2011] Updating source flux to 9.4e-14