[Sat Oct  8 03:37:27 2011] Detection parameters:
  Position = (686.4, 467.3) = 9 0 36.85 20 53 40.1
  Extent = 2.0" x 1.8", rotation angle = 131 degrees
  Source counts = 7411.6 +/- 97.9
  Background counts = 2174.4
  Rate = 0.2 +/- 0.002

[Sat Oct  8 03:37:28 2011] Off-axis axis estimate = 1.20'
[Sat Oct  8 03:38:14 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:38:14 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct  8 03:38:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.381
[Sat Oct  8 03:38:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Sat Oct  8 03:38:14 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 03:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:38:14 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 03:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:38:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10463_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:38:15 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 03:38:15 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:38:15 2011] Fit fullrun_ccd7_acisf10463_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:38:25 2011] Spatial fit model total counts = 4413.220000, observed total counts = 4414.000000
[Sat Oct  8 03:38:25 2011] Offset between fit and detection position for source 2 = 1.068182 pixels
[Sat Oct  8 03:38:25 2011] 4442.781000 total counts/ 3501.380000 bgd. counts: snr = 15.909445
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.068182 pixels
  Position = (687.1, 468.1) = 9 0 36.85 20 53 40.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 941.4 +/- 66.7
  Background counts = 3501.4
  Rate = 0.02 +/- 0.002
[Sat Oct  8 03:38:25 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:38:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:38:25 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:38:25 2011] Source does appear to be extended
[Sat Oct  8 03:38:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:38:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:38:41 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct  8 03:38:41 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.072
[Sat Oct  8 03:38:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Sat Oct  8 03:38:41 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 03:38:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:38:41 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 03:38:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:38:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10463_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:38:42 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 03:38:42 2011] fullrun_ccd7_acisf10463_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:38:42 2011] Fit fullrun_ccd7_acisf10463_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:38:48 2011] Spatial fit model total counts = 4386.340000, observed total counts = 4387.000000
[Sat Oct  8 03:38:48 2011] Offset between fit and detection position for source 2 = 0.017293 pixels
[Sat Oct  8 03:38:48 2011] 4359.225000 total counts/ 3398.880000 bgd. counts: snr = 16.472494
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.017293 pixels
  Position = (687.1, 468.1) = 9 0 36.84 20 53 40.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 960.3 +/- 66.0
  Background counts = 3398.9
  Rate = 0.02 +/- 0.002
[Sat Oct  8 03:38:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:38:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:38:48 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:38:48 2011] Source does appear to be extended
[Sat Oct  8 03:38:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:40:11 2011] Not overwriting source region fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  8 03:40:11 2011] Extracting stamp from image fullrun_ccd7_acisf10463_pi14-548_cl_sm2.00.img.gz, (665, 446) - (709, 490)
[Sat Oct  8 03:40:11 2011] Writing fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2.gif
[Sat Oct  8 03:40:12 2011] ../../acisf10463/products/events/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.evt and ../../acisf10463/products/events/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  8 03:40:12 2011] Size of ../../acisf10463/products/events/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1677 counts
[Sat Oct  8 03:40:12 2011] Mean chipx,y = (338.59, 522.56)
[Sat Oct  8 03:40:12 2011] Mean tdetx,y = (4255.59, 2224.56)
[Sat Oct  8 03:40:12 2011] chipx,y range = (318.00-359.00, 503.00-543.00)
[Sat Oct  8 03:40:12 2011] Size of ../../acisf10463/products/events/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 4976 counts
[Sat Oct  8 03:40:12 2011] ../../acisf10463/products/images/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.img and ../../acisf10463/products/images/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  8 03:40:12 2011] ../../acisf10463/products/spectra/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.pi and ../../acisf10463/products/spectra/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  8 03:40:14 2011] ../../acisf10463/products/lightcurves/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.lc and ../../acisf10463/products/lightcurves/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  8 03:40:38 2011] Keeping rmf generated by specextract
[Sat Oct  8 03:40:38 2011] 234.956
[Sat Oct  8 03:40:40 2011] Updating aperture counts using extracted products
[Sat Oct  8 03:40:40 2011] Error reading totcts from fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  8 03:40:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 03:40:40 2011] Using photon index=1.80, rate=0.0236, arf fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2.arf
[Sat Oct  8 03:40:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 03:40:40 2011] Updating source flux to 1.7e-13
[Sat Oct  8 03:40:55 2011] Reading fit data from acisf10463/analysis//spectral/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct  8 03:40:55 2011] Spectral fit parameter nH value = 2.65956e+13
[Sat Oct  8 03:40:55 2011] Spectral fit parameter PhoIndex value = -0.181926
[Sat Oct  8 03:40:55 2011] Failed to get F(0.3-8.0) from acisf10463/analysis//spectral/fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct  8 03:40:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 03:40:55 2011] Using Nh = 2.7e+13, photon index=-0.18, rate=0.0236, arf fullrun_ccd7_acisf10463_pi14-548_pass1_cl_src2.arf
[Sat Oct  8 03:40:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 03:40:55 2011] Updating source flux to 5.4e-13