[Sun Oct  2 13:58:40 2011] Detection parameters:
  Position = (550.7, 888.2) = 14 38 42.48 34 10 55.9
  Extent = 0.9" x 0.8", rotation angle = 102 degrees
  Source counts = 10.6 +/- 4.0
  Background counts = 5.4
  Rate = 0.0001 +/- 4e-05

[Sun Oct  2 13:58:40 2011] Off-axis axis estimate = 6.39'
[Sun Oct  2 14:00:32 2011] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 14:00:32 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Sun Oct  2 14:00:32 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.007
[Sun Oct  2 14:00:32 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.83"
[Sun Oct  2 14:00:32 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct  2 14:00:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20.csv
[Sun Oct  2 14:00:32 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct  2 14:00:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20.csv
[Sun Oct  2 14:00:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10461_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 14:00:33 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct  2 14:00:33 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct  2 14:00:33 2011] Fit fullrun_ccd6_acisf10461_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct  2 14:00:47 2011] Source 23 is offset by -0.873567 and -2.335175 pixels which is larger than
2 X fitted extent = 1.885039 x 1.885039, not incorporating fit results
[Sun Oct  2 14:00:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 14:00:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 14:00:47 2011] Assessing source extent using major
[Sun Oct  2 14:00:47 2011] Source does appear to be extended
[Sun Oct  2 14:00:47 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Sun Oct  2 14:01:19 2011] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 14:01:19 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Sun Oct  2 14:01:19 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.007
[Sun Oct  2 14:01:19 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 1.83"
[Sun Oct  2 14:01:19 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct  2 14:01:19 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct  2 14:01:19 2011] Fit fullrun_ccd6_acisf10461_pi14-548_cl_pass1_src20 appears to have run properly
[Sun Oct  2 14:01:20 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct  2 14:01:20 2011] fullrun_ccd6_acisf10461_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct  2 14:01:20 2011] Fit fullrun_ccd6_acisf10461_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct  2 14:01:34 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 22.101816 pixels away
[Sun Oct  2 14:01:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 14:01:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 14:01:34 2011] Assessing source extent using major
[Sun Oct  2 14:01:34 2011] Source does appear to be extended
[Sun Oct  2 14:01:34 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Sun Oct  2 14:01:34 2011] Deleting source due to low Poisson probability 0.9