[Sun Oct 30 20:11:13 2011] Detection parameters:
  Position = (534.3, 630.0) = 14 25 29.83 34 33 17.7
  Extent = 0.8" x 0.6", rotation angle = 45 degrees
  Source counts = 19.6 +/- 4.6
  Background counts = 1.4
  Rate = 0.0005 +/- 0.0001

[Sun Oct 30 20:11:14 2011] Off-axis axis estimate = 5.25'
[Sun Oct 30 20:12:09 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:09 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Sun Oct 30 20:12:09 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Sun Oct 30 20:12:09 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.28"
[Sun Oct 30 20:12:10 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12.ximg exists
[Sun Oct 30 20:12:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 20:12:10 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Oct 30 20:12:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 20:12:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10458_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:10 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Oct 30 20:12:10 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Oct 30 20:12:10 2011] Fit fullrun_ccd3_acisf10458_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Oct 30 20:12:21 2011] Spatial fit model total counts = 22.311900, observed total counts = 23.000000
[Sun Oct 30 20:12:21 2011] Offset between fit and detection position for source 14 = 0.810802 pixels
[Sun Oct 30 20:12:21 2011] 21.814899 total counts/ 0.212499 bgd. counts: snr = 46.862295
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.810802 pixels
  Position = (534.9, 630.6) = 14 25 29.82 34 33 17.7
  Extent = 1.0 (0.5-1.3)", rotation angle = 0
  Source counts = 21.6 +/- 4.7
  Background counts = 0.2
  Rate = 0.0006 +/- 0.0001
[Sun Oct 30 20:12:21 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:21 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:21 2011] Source does appear to be extended
[Sun Oct 30 20:12:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:12:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:41 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sun Oct 30 20:12:41 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Sun Oct 30 20:12:41 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.98"
[Sun Oct 30 20:12:42 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12.ximg exists
[Sun Oct 30 20:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 20:12:42 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Oct 30 20:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 20:12:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10458_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:42 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Oct 30 20:12:42 2011] fullrun_ccd3_acisf10458_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Oct 30 20:12:42 2011] Fit fullrun_ccd3_acisf10458_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Oct 30 20:12:51 2011] Spatial fit model total counts = 22.370400, observed total counts = 23.000000
[Sun Oct 30 20:12:51 2011] Offset between fit and detection position for source 14 = 0.035185 pixels
[Sun Oct 30 20:12:51 2011] 21.811924 total counts/ 0.003924 bgd. counts: snr = 348.121959
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.035185 pixels
  Position = (534.9, 630.6) = 14 25 29.82 34 33 17.7
  Extent = 1.0 (0.5-1.3)", rotation angle = 0
  Source counts = 21.8 +/- 4.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sun Oct 30 20:12:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:51 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:51 2011] Source does appear to be extended
[Sun Oct 30 20:12:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:15:54 2011] Not overwriting source region fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.reg
[Sun Oct 30 20:15:54 2011] Extracting stamp from image fullrun_ccd3_acisf10458_pi14-548_cl_sm2.00.img.gz, (490, 586) - (580, 675)
[Sun Oct 30 20:15:54 2011] Writing fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14.gif
[Sun Oct 30 20:16:30 2011] ../../acisf10458/products/events/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.evt and ../../acisf10458/products/events/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Oct 30 20:16:30 2011] Size of ../../acisf10458/products/events/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.evt.gz[events] = 22 counts
[Sun Oct 30 20:16:30 2011] Mean chipx,y = (415.23, 672.82)
[Sun Oct 30 20:16:30 2011] Mean tdetx,y = (4459.18, 3476.23)
[Sun Oct 30 20:16:30 2011] chipx,y range = (391.00-431.00, 658.00-690.00)
[Sun Oct 30 20:16:30 2011] Size of ../../acisf10458/products/events/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 33 counts
[Sun Oct 30 20:16:30 2011] ../../acisf10458/products/images/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.img and ../../acisf10458/products/images/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Oct 30 20:16:30 2011] ../../acisf10458/products/spectra/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.pi and ../../acisf10458/products/spectra/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Oct 30 20:16:30 2011] Not generating rmf since there are only 21 counts
[Sun Oct 30 20:16:32 2011] ../../acisf10458/products/lightcurves/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.lc and ../../acisf10458/products/lightcurves/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Oct 30 20:17:29 2011] 180.478
[Sun Oct 30 20:17:33 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:17:34 2011] Error reading totcts from fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_src.pi.gz
[Sun Oct 30 20:17:34 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:17:34 2011] Using photon index=1.80, rate=0.000594, arf fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14.arf
[Sun Oct 30 20:17:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:17:34 2011] Updating source flux to 7.8e-15
[Sun Oct 30 20:17:44 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 20:17:45 2011] acisf10458/analysis//spectral/fullrun_ccd3_acisf10458_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete