[Sun Oct 30 20:11:11 2011] Detection parameters:
  Position = (503.2, 1128.4) = 14 25 55.93 34 30 21.9
  Extent = 2.4" x 1.4", rotation angle = 57 degrees
  Source counts = 89.1 +/- 10.0
  Background counts = 10.9
  Rate = 0.002 +/- 0.0003

[Sun Oct 30 20:11:13 2011] Off-axis axis estimate = 7.43'
[Sun Oct 30 20:12:08 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 20:12:08 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Sun Oct 30 20:12:08 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.008
[Sun Oct 30 20:12:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.45"
[Sun Oct 30 20:12:09 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 20:12:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 20:12:09 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 20:12:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 20:12:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10458_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:09 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 20:12:09 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 20:12:09 2011] Fit fullrun_ccd2_acisf10458_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 20:12:19 2011] Spatial fit model total counts = 107.239000, observed total counts = 107.000000
[Sun Oct 30 20:12:19 2011] Offset between fit and detection position for source 1 = 0.660021 pixels
[Sun Oct 30 20:12:19 2011] 107.595890 total counts/ 3.081890 bgd. counts: snr = 59.534115
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.660021 pixels
  Position = (503.2, 1129.0) = 14 25 55.96 34 30 22.0
  Extent = 2.7 (2.4-3.1)", rotation angle = 0
  Source counts = 104.5 +/- 10.4
  Background counts = 3.1
  Rate = 0.003 +/- 0.0003
[Sun Oct 30 20:12:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:19 2011] Source does appear to be extended
[Sun Oct 30 20:12:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:12:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 20:12:40 2011] Initial guess for spatial extent in simple fitting = 2.72"
[Sun Oct 30 20:12:40 2011] source mask rpix=5.5, npix_max = 144, mask sum = 142, frac = 0.980
[Sun Oct 30 20:12:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.72"
[Sun Oct 30 20:12:40 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 20:12:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 20:12:40 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 20:12:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 20:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10458_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:40 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 20:12:40 2011] fullrun_ccd2_acisf10458_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 20:12:41 2011] Fit fullrun_ccd2_acisf10458_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 20:12:49 2011] Spatial fit model total counts = 110.034000, observed total counts = 111.000000
[Sun Oct 30 20:12:49 2011] Offset between fit and detection position for source 1 = 0.182212 pixels
[Sun Oct 30 20:12:49 2011] 110.725660 total counts/ 7.502660 bgd. counts: snr = 37.685028
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182212 pixels
  Position = (503.1, 1128.8) = 14 25 55.96 34 30 21.9
  Extent = 2.7 (2.4-3.1)", rotation angle = 0
  Source counts = 103.2 +/- 10.5
  Background counts = 7.5
  Rate = 0.003 +/- 0.0003
[Sun Oct 30 20:12:49 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:49 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:49 2011] Source does appear to be extended
[Sun Oct 30 20:12:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:14:26 2011] Not overwriting source region fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 20:14:26 2011] Extracting stamp from image fullrun_ccd2_acisf10458_pi14-548_cl_sm2.00.img.gz, (379, 1005) - (627, 1253)
[Sun Oct 30 20:14:26 2011] Writing fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 20:14:28 2011] ../../acisf10458/products/events/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.evt and ../../acisf10458/products/events/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 20:14:28 2011] Size of ../../acisf10458/products/events/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.evt.gz[events] = 106 counts
[Sun Oct 30 20:14:28 2011] Mean chipx,y = (919.76, 712.67)
[Sun Oct 30 20:14:28 2011] Mean tdetx,y = (3773.67, 3166.24)
[Sun Oct 30 20:14:28 2011] chipx,y range = (892.00-948.00, 683.00-742.00)
[Sun Oct 30 20:14:28 2011] Size of ../../acisf10458/products/events/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 207 counts
[Sun Oct 30 20:14:28 2011] ../../acisf10458/products/images/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.img and ../../acisf10458/products/images/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 20:14:28 2011] ../../acisf10458/products/spectra/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.pi and ../../acisf10458/products/spectra/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 20:14:30 2011] ../../acisf10458/products/lightcurves/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.lc and ../../acisf10458/products/lightcurves/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 20:15:53 2011] Keeping rmf generated by specextract
[Sun Oct 30 20:15:53 2011] 168.881
[Sun Oct 30 20:17:33 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:17:33 2011] Error reading totcts from fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 20:17:33 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:17:33 2011] Using photon index=1.80, rate=0.00281, arf fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 20:17:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:17:33 2011] Updating source flux to 4e-14
[Sun Oct 30 20:17:44 2011] Reading fit data from acisf10458/analysis//spectral/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 30 20:17:44 2011] Spectral fit parameter nH value = 1.48703e+14
[Sun Oct 30 20:17:44 2011] Spectral fit parameter PhoIndex value = 1.38016
[Sun Oct 30 20:17:44 2011] Failed to get F(0.3-8.0) from acisf10458/analysis//spectral/fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 20:17:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:17:44 2011] Using Nh = 1.5e+14, photon index=1.38, rate=0.00281, arf fullrun_ccd2_acisf10458_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 20:17:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:17:44 2011] Updating source flux to 4.4e-14