[Sun Oct 30 20:11:10 2011] Detection parameters:
  Position = (818.6, 850.3) = 14 24 45.79 34 29 45.5
  Extent = 0.8" x 0.6", rotation angle = 152 degrees
  Source counts = 58.5 +/- 8.1
  Background counts = 6.5
  Rate = 0.002 +/- 0.0002

[Sun Oct 30 20:11:11 2011] Off-axis axis estimate = 7.43'
[Sun Oct 30 20:12:07 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:07 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Sun Oct 30 20:12:07 2011] source mask rpix=5.0, npix_max = 119, mask sum = 117, frac = 0.977
[Sun Oct 30 20:12:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.45"
[Sun Oct 30 20:12:08 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 20:12:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:12:08 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 20:12:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:12:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10458_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:08 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 20:12:08 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:12:08 2011] Fit fullrun_ccd1_acisf10458_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:12:16 2011] Spatial fit model total counts = 77.769500, observed total counts = 78.000000
[Sun Oct 30 20:12:16 2011] Offset between fit and detection position for source 25 = 0.870446 pixels
[Sun Oct 30 20:12:16 2011] 78.765200 total counts/ 18.565800 bgd. counts: snr = 13.971252
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.870446 pixels
  Position = (819.2, 851.0) = 14 24 45.79 34 29 45.6
  Extent = 1.5 (1.2-2.0)", rotation angle = 0
  Source counts = 60.2 +/- 8.9
  Background counts = 18.6
  Rate = 0.002 +/- 0.0002
[Sun Oct 30 20:12:16 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:16 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:16 2011] Source does appear to be extended
[Sun Oct 30 20:12:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:12:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:12:38 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Sun Oct 30 20:12:38 2011] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.084
[Sun Oct 30 20:12:38 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.52"
[Sun Oct 30 20:12:39 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 20:12:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:12:39 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 20:12:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:12:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10458_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:12:39 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 20:12:39 2011] fullrun_ccd1_acisf10458_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:12:39 2011] Fit fullrun_ccd1_acisf10458_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:12:48 2011] Spatial fit model total counts = 65.333100, observed total counts = 69.000000
[Sun Oct 30 20:12:48 2011] Offset between fit and detection position for source 25 = 0.861003 pixels
[Sun Oct 30 20:12:48 2011] 64.681139 total counts/ 0.056139 bgd. counts: snr = 272.753145
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.861003 pixels
  Position = (820.0, 850.6) = 14 24 45.76 34 29 45.4
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 64.6 +/- 8.0
  Background counts = 0.1
  Rate = 0.002 +/- 0.0002
[Sun Oct 30 20:12:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:12:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:12:48 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:12:48 2011] Source does appear to be extended
[Sun Oct 30 20:12:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:13:22 2011] Not overwriting source region fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.reg
[Sun Oct 30 20:13:22 2011] Extracting stamp from image fullrun_ccd1_acisf10458_pi14-548_cl_sm2.00.img.gz, (749, 779) - (891, 922)
[Sun Oct 30 20:13:22 2011] Writing fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25.gif
[Sun Oct 30 20:13:29 2011] ../../acisf10458/products/events/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.evt and ../../acisf10458/products/events/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sun Oct 30 20:13:29 2011] Size of ../../acisf10458/products/events/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.evt.gz[events] = 75 counts
[Sun Oct 30 20:13:29 2011] Mean chipx,y = (506.43, 344.96)
[Sun Oct 30 20:13:29 2011] Mean tdetx,y = (4787.04, 4613.43)
[Sun Oct 30 20:13:29 2011] chipx,y range = (482.00-531.00, 323.00-364.00)
[Sun Oct 30 20:13:29 2011] Size of ../../acisf10458/products/events/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 88 counts
[Sun Oct 30 20:13:29 2011] ../../acisf10458/products/images/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.img and ../../acisf10458/products/images/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Sun Oct 30 20:13:29 2011] ../../acisf10458/products/spectra/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.pi and ../../acisf10458/products/spectra/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sun Oct 30 20:13:29 2011] Not generating rmf since there are only 64 counts
[Sun Oct 30 20:13:32 2011] ../../acisf10458/products/lightcurves/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.lc and ../../acisf10458/products/lightcurves/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sun Oct 30 20:14:25 2011] 173.637
[Sun Oct 30 20:17:32 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:17:32 2011] Error reading totcts from fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_src.pi.gz
[Sun Oct 30 20:17:33 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:17:33 2011] Using photon index=1.80, rate=0.00176, arf fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25.arf
[Sun Oct 30 20:17:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:17:33 2011] Updating source flux to 2.4e-14
[Sun Oct 30 20:17:38 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 20:17:39 2011] acisf10458/analysis//spectral/fullrun_ccd1_acisf10458_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete