[Sun Oct 30 16:48:01 2011] Detection parameters:
  Position = (488.1, 672.4) = 14 32 35.26 34 41 37.5
  Extent = 0.9" x 0.5", rotation angle = 55 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Sun Oct 30 16:48:02 2011] Off-axis axis estimate = 4.96'
[Sun Oct 30 16:49:01 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:01 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Sun Oct 30 16:49:01 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.912
[Sun Oct 30 16:49:01 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.17"
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15.ximg exists
[Sun Oct 30 16:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15.csv
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Oct 30 16:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15.csv
[Sun Oct 30 16:49:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Oct 30 16:49:02 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Oct 30 16:49:17 2011] Spatial fit model total counts = 23.458400, observed total counts = 24.000000
[Sun Oct 30 16:49:17 2011] Offset between fit and detection position for source 9 = 0.725149 pixels
[Sun Oct 30 16:49:17 2011] 23.337200 total counts/ 11.762800 bgd. counts: snr = 3.374762
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.725149 pixels
  Position = (488.8, 672.8) = 14 32 35.26 34 41 37.5
  Extent = 0.6 (0.3-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 4.8
  Background counts = 11.8
  Rate = 0.0004 +/- 0.0002
[Sun Oct 30 16:49:17 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:17 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:17 2011] Source does appear to be extended
[Sun Oct 30 16:49:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:49:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:43 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Oct 30 16:49:43 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.853
[Sun Oct 30 16:49:43 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.55"
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15.ximg exists
[Sun Oct 30 16:49:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15.csv
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Oct 30 16:49:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15.csv
[Sun Oct 30 16:49:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Oct 30 16:49:44 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Oct 30 16:49:56 2011] Spatial fit model total counts = 23.733400, observed total counts = 24.000000
[Sun Oct 30 16:49:56 2011] Offset between fit and detection position for source 9 = 0.335444 pixels
[Sun Oct 30 16:49:56 2011] 23.192600 total counts/ 13.043600 bgd. counts: snr = 2.810118
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.335444 pixels
  Position = (489.0, 673.1) = 14 32 35.25 34 41 37.6
  Extent = 0.5 (0.3-1.0)", rotation angle = 0
  Source counts = 10.1 +/- 4.8
  Background counts = 13.0
  Rate = 0.0003 +/- 0.0002
[Sun Oct 30 16:49:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:56 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:56 2011] Source does appear to be extended
[Sun Oct 30 16:49:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:53:52 2011] Not overwriting source region fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 30 16:53:52 2011] Extracting stamp from image fullrun_ccd3_acisf10456_pi14-548_cl_sm2.00.img.gz, (468, 652) - (510, 694)
[Sun Oct 30 16:53:52 2011] Writing fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9.gif
[Sun Oct 30 16:54:40 2011] ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.evt and ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 30 16:54:40 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.evt.gz[events] = 15 counts
[Sun Oct 30 16:54:40 2011] Mean chipx,y = (449.67, 682.80)
[Sun Oct 30 16:54:40 2011] Mean tdetx,y = (4449.20, 3510.67)
[Sun Oct 30 16:54:40 2011] chipx,y range = (428.00-462.00, 666.00-701.00)
[Sun Oct 30 16:54:40 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 8 counts
[Sun Oct 30 16:54:40 2011] ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.img and ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 30 16:54:40 2011] ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.pi and ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 30 16:54:40 2011] Not generating rmf since there are only 10 counts
[Sun Oct 30 16:54:43 2011] ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.lc and ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 30 16:55:24 2011] 183.162
[Sun Oct 30 16:55:35 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:55:36 2011] Error reading totcts from fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 30 16:55:36 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:55:36 2011] Using photon index=1.80, rate=0.000319, arf fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src9.arf
[Sun Oct 30 16:55:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:55:36 2011] Updating source flux to 4.2e-15
[Sun Oct 30 16:55:50 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting