[Sun Oct 30 16:48:00 2011] Detection parameters:
  Position = (664.4, 337.5) = 14 32 28.24 34 38 52.7
  Extent = 0.5" x 0.5", rotation angle = 133 degrees
  Source counts = 84.8 +/- 9.3
  Background counts = 1.2
  Rate = 0.003 +/- 0.0003

[Sun Oct 30 16:48:02 2011] Off-axis axis estimate = 3.31'
[Sun Oct 30 16:49:01 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:01 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Oct 30 16:49:01 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.683
[Sun Oct 30 16:49:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.65"
[Sun Oct 30 16:49:01 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:49:01 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:49:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:49:02 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:49:17 2011] Spatial fit model total counts = 87.147800, observed total counts = 87.000000
[Sun Oct 30 16:49:17 2011] Offset between fit and detection position for source 3 = 0.710999 pixels
[Sun Oct 30 16:49:17 2011] 86.923435 total counts/ 0.713835 bgd. counts: snr = 102.036772
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.710999 pixels
  Position = (664.9, 338.0) = 14 32 28.24 34 38 52.7
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 86.2 +/- 9.3
  Background counts = 0.7
  Rate = 0.003 +/- 0.0003
[Sun Oct 30 16:49:17 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:17 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:17 2011] Source does appear to be extended
[Sun Oct 30 16:49:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:49:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:43 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Oct 30 16:49:43 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.216
[Sun Oct 30 16:49:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.65"
[Sun Oct 30 16:49:43 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 16:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:49:43 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 16:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:49:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:49:44 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:49:56 2011] Spatial fit model total counts = 86.016000, observed total counts = 87.000000
[Sun Oct 30 16:49:56 2011] Offset between fit and detection position for source 3 = 0.010837 pixels
[Sun Oct 30 16:49:56 2011] 85.717799 total counts/ 0.006899 bgd. counts: snr = 1031.912013
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010837 pixels
  Position = (664.9, 338.0) = 14 32 28.24 34 38 52.7
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 85.7 +/- 9.3
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sun Oct 30 16:49:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:56 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:56 2011] Source does appear to be extended
[Sun Oct 30 16:49:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:53:52 2011] Not overwriting source region fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 30 16:53:52 2011] Extracting stamp from image fullrun_ccd3_acisf10456_pi14-548_cl_sm2.00.img.gz, (635, 308) - (695, 368)
[Sun Oct 30 16:53:52 2011] Writing fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3.gif
[Sun Oct 30 16:54:01 2011] ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.evt and ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 30 16:54:01 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.evt.gz[events] = 86 counts
[Sun Oct 30 16:54:01 2011] Mean chipx,y = (823.22, 637.99)
[Sun Oct 30 16:54:01 2011] Mean tdetx,y = (4494.01, 3884.22)
[Sun Oct 30 16:54:01 2011] chipx,y range = (806.00-840.00, 619.00-655.00)
[Sun Oct 30 16:54:01 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Sun Oct 30 16:54:01 2011] ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.img and ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 30 16:54:01 2011] ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.pi and ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 30 16:54:01 2011] Not generating rmf since there are only 85 counts
[Sun Oct 30 16:54:04 2011] ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.lc and ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 30 16:55:24 2011] 195.969
[Sun Oct 30 16:55:35 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:55:35 2011] Error reading totcts from fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 30 16:55:36 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:55:36 2011] Using photon index=1.80, rate=0.0027, arf fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src3.arf
[Sun Oct 30 16:55:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:55:36 2011] Updating source flux to 3.3e-14
[Sun Oct 30 16:55:50 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting