[Sun Oct 30 16:48:00 2011] Detection parameters:
  Position = (548.5, 527.1) = 14 32 32.86 34 40 26.0
  Extent = 0.6" x 0.5", rotation angle = 134 degrees
  Source counts = 321.4 +/- 18.0
  Background counts = 3.6
  Rate = 0.01 +/- 0.0006

[Sun Oct 30 16:48:02 2011] Off-axis axis estimate = 3.99'
[Sun Oct 30 16:49:01 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 16:49:01 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sun Oct 30 16:49:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Sun Oct 30 16:49:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.83"
[Sun Oct 30 16:49:01 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 16:49:01 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 16:49:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 16:49:02 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 16:49:02 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 16:49:17 2011] Spatial fit model total counts = 334.880000, observed total counts = 335.000000
[Sun Oct 30 16:49:17 2011] Offset between fit and detection position for source 1 = 0.637816 pixels
[Sun Oct 30 16:49:17 2011] 337.610700 total counts/ 46.525700 bgd. counts: snr = 42.674984
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.637816 pixels
  Position = (548.9, 527.6) = 14 32 32.86 34 40 26.0
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 291.1 +/- 18.4
  Background counts = 46.5
  Rate = 0.009 +/- 0.0006
[Sun Oct 30 16:49:17 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:17 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:17 2011] Source does appear to be extended
[Sun Oct 30 16:49:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:49:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 16:49:43 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Oct 30 16:49:43 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.963
[Sun Oct 30 16:49:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.62"
[Sun Oct 30 16:49:43 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 16:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 16:49:43 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 16:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 16:49:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10456_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 16:49:44 2011] fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 16:49:44 2011] Fit fullrun_ccd3_acisf10456_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 16:49:56 2011] Spatial fit model total counts = 330.855000, observed total counts = 335.000000
[Sun Oct 30 16:49:56 2011] Offset between fit and detection position for source 1 = 0.001591 pixels
[Sun Oct 30 16:49:56 2011] 333.420000 total counts/ 46.414000 bgd. counts: snr = 42.127577
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001591 pixels
  Position = (548.9, 527.6) = 14 32 32.86 34 40 26.0
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 287.0 +/- 18.3
  Background counts = 46.4
  Rate = 0.009 +/- 0.0006
[Sun Oct 30 16:49:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:56 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:56 2011] Source does appear to be extended
[Sun Oct 30 16:49:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:53:52 2011] Not overwriting source region fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 16:53:52 2011] Extracting stamp from image fullrun_ccd3_acisf10456_pi14-548_cl_sm2.00.img.gz, (521, 499) - (577, 556)
[Sun Oct 30 16:53:52 2011] Writing fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 16:53:55 2011] ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.evt and ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 16:53:55 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.evt.gz[events] = 311 counts
[Sun Oct 30 16:53:55 2011] Mean chipx,y = (604.55, 678.21)
[Sun Oct 30 16:53:55 2011] Mean tdetx,y = (4453.79, 3665.55)
[Sun Oct 30 16:53:55 2011] chipx,y range = (584.00-624.00, 659.00-697.00)
[Sun Oct 30 16:53:55 2011] Size of ../../acisf10456/products/events/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Sun Oct 30 16:53:55 2011] ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.img and ../../acisf10456/products/images/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 16:53:55 2011] ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.pi and ../../acisf10456/products/spectra/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 16:53:58 2011] ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.lc and ../../acisf10456/products/lightcurves/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 16:55:24 2011] Keeping rmf generated by specextract
[Sun Oct 30 16:55:24 2011] 189.44
[Sun Oct 30 16:55:35 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:55:35 2011] Error reading totcts from fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 16:55:36 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:55:36 2011] Using photon index=1.80, rate=0.00903, arf fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 16:55:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:55:36 2011] Updating source flux to 1.1e-13
[Sun Oct 30 16:55:59 2011] Reading fit data from acisf10456/analysis//spectral/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 30 16:55:59 2011] Spectral fit parameter nH value = 3.063e+19
[Sun Oct 30 16:55:59 2011] Spectral fit parameter PhoIndex value = 1.96927
[Sun Oct 30 16:55:59 2011] Failed to get F(0.3-8.0) from acisf10456/analysis//spectral/fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 16:55:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:55:59 2011] Using Nh = 3.1e+19, photon index=1.97, rate=0.00903, arf fullrun_ccd3_acisf10456_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 16:55:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:55:59 2011] Updating source flux to 1.1e-13