[Sun Oct 30 16:47:59 2011] Detection parameters:
  Position = (957.7, 603.3) = 14 32 54.98 34 38 8.8
  Extent = 0.8" x 0.5", rotation angle = 16 degrees
  Source counts = 44.2 +/- 6.8
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002

[Sun Oct 30 16:48:00 2011] Off-axis axis estimate = 3.23'
[Sun Oct 30 16:49:00 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:00 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Oct 30 16:49:00 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.267
[Sun Oct 30 16:49:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.63"
[Sun Oct 30 16:49:00 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:49:01 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 16:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 16:49:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10456_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:01 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 16:49:01 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:49:01 2011] Fit fullrun_ccd2_acisf10456_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:49:14 2011] Spatial fit model total counts = 46.991600, observed total counts = 47.000000
[Sun Oct 30 16:49:14 2011] Offset between fit and detection position for source 2 = 0.530282 pixels
[Sun Oct 30 16:49:14 2011] 46.864010 total counts/ 6.071010 bgd. counts: snr = 16.555991
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.530282 pixels
  Position = (957.9, 603.8) = 14 32 54.99 34 38 8.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 40.8 +/- 6.8
  Background counts = 6.1
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 16:49:14 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:14 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:14 2011] Source does appear to be extended
[Sun Oct 30 16:49:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:49:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:49:41 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Oct 30 16:49:41 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.045
[Sun Oct 30 16:49:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.59"
[Sun Oct 30 16:49:42 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 16:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:49:42 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 16:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 16:49:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10456_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:49:42 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 16:49:42 2011] fullrun_ccd2_acisf10456_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 16:49:42 2011] Fit fullrun_ccd2_acisf10456_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 16:49:54 2011] Spatial fit model total counts = 47.342500, observed total counts = 46.000000
[Sun Oct 30 16:49:54 2011] Offset between fit and detection position for source 2 = 0.024602 pixels
[Sun Oct 30 16:49:54 2011] 46.968060 total counts/ 4.397660 bgd. counts: snr = 20.300041
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.024602 pixels
  Position = (957.9, 603.8) = 14 32 54.99 34 38 8.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 42.6 +/- 6.9
  Background counts = 4.4
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 16:49:54 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:49:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:49:54 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:49:54 2011] Source does appear to be extended
[Sun Oct 30 16:49:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:52:45 2011] Not overwriting source region fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 16:52:45 2011] Extracting stamp from image fullrun_ccd2_acisf10456_pi14-548_cl_sm2.00.img.gz, (931, 577) - (985, 631)
[Sun Oct 30 16:52:45 2011] Writing fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 16:52:52 2011] ../../acisf10456/products/events/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.evt and ../../acisf10456/products/events/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 16:52:52 2011] Size of ../../acisf10456/products/events/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.evt.gz[events] = 43 counts
[Sun Oct 30 16:52:52 2011] Mean chipx,y = (358.21, 774.47)
[Sun Oct 30 16:52:52 2011] Mean tdetx,y = (3835.47, 3727.79)
[Sun Oct 30 16:52:52 2011] chipx,y range = (342.00-374.00, 755.00-791.00)
[Sun Oct 30 16:52:52 2011] Size of ../../acisf10456/products/events/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Sun Oct 30 16:52:52 2011] ../../acisf10456/products/images/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.img and ../../acisf10456/products/images/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 16:52:52 2011] ../../acisf10456/products/spectra/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.pi and ../../acisf10456/products/spectra/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 16:52:52 2011] Not generating rmf since there are only 42 counts
[Sun Oct 30 16:52:54 2011] ../../acisf10456/products/lightcurves/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.lc and ../../acisf10456/products/lightcurves/fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 16:53:51 2011] 190.461
[Sun Oct 30 16:55:35 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:55:35 2011] Error reading totcts from fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 16:55:35 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:55:35 2011] Using photon index=1.80, rate=0.00134, arf fullrun_ccd2_acisf10456_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 16:55:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:55:35 2011] Updating source flux to 1.7e-14
[Sun Oct 30 16:55:47 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting