[Wed Sep 28 16:29:05 2011] Detection parameters:
  Position = (418.3, 73.9) = 14 34 30.41 34 27 13.6
  Extent = 0.5" x 0.5", rotation angle = 141 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Wed Sep 28 16:29:05 2011] Off-axis axis estimate = 0.48'
[Wed Sep 28 16:29:50 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:29:50 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Sep 28 16:29:50 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Wed Sep 28 16:29:50 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.39"
[Wed Sep 28 16:29:51 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10.ximg exists
[Wed Sep 28 16:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10.csv
[Wed Sep 28 16:29:51 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Sep 28 16:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10.csv
[Wed Sep 28 16:29:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10455_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:29:51 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep 28 16:29:51 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep 28 16:29:51 2011] Fit fullrun_ccd3_acisf10455_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Sep 28 16:29:58 2011] Spatial fit model total counts = 13.065800, observed total counts = 14.000000
[Wed Sep 28 16:29:58 2011] Offset between fit and detection position for source 23 = 0.767876 pixels
[Wed Sep 28 16:29:58 2011] 12.877130 total counts/ 1.875030 bgd. counts: snr = 8.034734
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.767876 pixels
  Position = (418.6, 74.6) = 14 34 30.42 34 27 13.7
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 11.0 +/- 3.6
  Background counts = 1.9
  Rate = 0.0003 +/- 0.0001
[Wed Sep 28 16:29:58 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:29:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:29:58 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:29:58 2011] Source does appear to be extended
[Wed Sep 28 16:29:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:30:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:30:17 2011] Initial guess for spatial extent in simple fitting = 0.30"
[Wed Sep 28 16:30:17 2011] source mask rpix=0.6, npix_max = 4, mask sum = 9, frac = 1.802
[Wed Sep 28 16:30:17 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.30"
[Wed Sep 28 16:30:18 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10.ximg exists
[Wed Sep 28 16:30:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10.csv
[Wed Sep 28 16:30:18 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Sep 28 16:30:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10.csv
[Wed Sep 28 16:30:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10455_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:30:18 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Sep 28 16:30:18 2011] fullrun_ccd3_acisf10455_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Sep 28 16:30:18 2011] Fit fullrun_ccd3_acisf10455_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Sep 28 16:30:25 2011] Spatial fit model total counts = 14.425600, observed total counts = 14.000000
[Wed Sep 28 16:30:25 2011] Offset between fit and detection position for source 23 = 0.002734 pixels
[Wed Sep 28 16:30:25 2011] 14.235500 total counts/ 1.859800 bgd. counts: snr = 9.074791
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.002734 pixels
  Position = (418.6, 74.6) = 14 34 30.42 34 27 13.7
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 12.4 +/- 3.8
  Background counts = 1.9
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 16:30:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:30:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:30:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:30:25 2011] Source does appear to be extended
[Wed Sep 28 16:30:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:33:25 2011] Not overwriting source region fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.reg
[Wed Sep 28 16:33:25 2011] Extracting stamp from image fullrun_ccd3_acisf10455_pi14-548_cl_sm2.00.img.gz, (404, 60) - (433, 89)
[Wed Sep 28 16:33:25 2011] Writing fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23.gif
[Wed Sep 28 16:33:51 2011] ../../acisf10455/products/events/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.evt and ../../acisf10455/products/events/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Sep 28 16:33:51 2011] Size of ../../acisf10455/products/events/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.evt.gz[events] = 12 counts
[Wed Sep 28 16:33:51 2011] Mean chipx,y = (968.83, 956.50)
[Wed Sep 28 16:33:51 2011] Mean tdetx,y = (4175.50, 4029.83)
[Wed Sep 28 16:33:51 2011] chipx,y range = (951.00-983.00, 945.00-975.00)
[Wed Sep 28 16:33:51 2011] Size of ../../acisf10455/products/events/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 1 counts
[Wed Sep 28 16:33:51 2011] ../../acisf10455/products/images/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.img and ../../acisf10455/products/images/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Sep 28 16:33:51 2011] ../../acisf10455/products/spectra/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.pi and ../../acisf10455/products/spectra/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Sep 28 16:33:51 2011] Not generating rmf since there are only 12 counts
[Wed Sep 28 16:33:55 2011] ../../acisf10455/products/lightcurves/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.lc and ../../acisf10455/products/lightcurves/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Sep 28 16:34:21 2011] 202.879
[Wed Sep 28 16:34:25 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:34:25 2011] Error reading totcts from fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Sep 28 16:34:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:34:25 2011] Using photon index=1.80, rate=0.000361, arf fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23.arf
[Wed Sep 28 16:34:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 16:34:25 2011] Updating source flux to 4.2e-15
[Wed Sep 28 16:34:36 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 16:34:37 2011] acisf10455/analysis//spectral/fullrun_ccd3_acisf10455_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete