[Fri Oct 21 18:32:13 2011] Detection parameters:
  Position = (282.6, 36.1) = 14 29 15.28 34 37 8.8
  Extent = 0.5" x 0.5", rotation angle = 157 degrees
  Source counts = 81.9 +/- 9.1
  Background counts = 1.1
  Rate = 0.003 +/- 0.0003

[Fri Oct 21 18:32:13 2011] Off-axis axis estimate = 1.19'
[Fri Oct 21 18:33:06 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:06 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct 21 18:33:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Fri Oct 21 18:33:06 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38"
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 21 18:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 21 18:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 18:33:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 21 18:33:07 2011] Fit fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 21 18:33:21 2011] Spatial fit model total counts = 87.874600, observed total counts = 88.000000
[Fri Oct 21 18:33:21 2011] Offset between fit and detection position for source 35 = 0.689678 pixels
[Fri Oct 21 18:33:21 2011] 88.605850 total counts/ 8.789150 bgd. counts: snr = 26.922806
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.689678 pixels
  Position = (283.1, 36.6) = 14 29 15.28 34 37 8.8
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 79.8 +/- 9.4
  Background counts = 8.8
  Rate = 0.003 +/- 0.0003
[Fri Oct 21 18:33:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:21 2011] Source does appear to be extended
[Fri Oct 21 18:33:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:33:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:42 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Oct 21 18:33:42 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.827
[Fri Oct 21 18:33:42 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.42"
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 21 18:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 21 18:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 18:33:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 21 18:33:43 2011] Fit fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 21 18:33:56 2011] Spatial fit model total counts = 85.548000, observed total counts = 87.000000
[Fri Oct 21 18:33:56 2011] Offset between fit and detection position for source 35 = 0.004827 pixels
[Fri Oct 21 18:33:56 2011] 86.762640 total counts/ 6.036140 bgd. counts: snr = 32.857648
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.004827 pixels
  Position = (283.1, 36.6) = 14 29 15.28 34 37 8.8
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 80.7 +/- 9.3
  Background counts = 6.0
  Rate = 0.003 +/- 0.0003
[Fri Oct 21 18:33:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:56 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:56 2011] Source does appear to be extended
[Fri Oct 21 18:33:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:36:12 2011] Not overwriting source region fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.reg
[Fri Oct 21 18:36:12 2011] Extracting stamp from image fullrun_ccd3_acisf10454_pi14-548_cl_sm2.00.img.gz, (263, 17) - (303, 56)
[Fri Oct 21 18:36:12 2011] Writing fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35.gif
[Fri Oct 21 18:36:25 2011] ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.evt and ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Fri Oct 21 18:36:25 2011] Size of ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.evt.gz[events] = 82 counts
[Fri Oct 21 18:36:25 2011] Mean chipx,y = (1008.50, 893.60)
[Fri Oct 21 18:36:25 2011] Mean tdetx,y = (4238.40, 4069.50)
[Fri Oct 21 18:36:25 2011] chipx,y range = (995.00-1023.00, 875.00-910.00)
[Fri Oct 21 18:36:25 2011] Size of ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 7 counts
[Fri Oct 21 18:36:25 2011] ../../acisf10454/products/images/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.img and ../../acisf10454/products/images/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Fri Oct 21 18:36:25 2011] ../../acisf10454/products/spectra/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.pi and ../../acisf10454/products/spectra/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Fri Oct 21 18:36:25 2011] Not generating rmf since there are only 80 counts
[Fri Oct 21 18:36:27 2011] ../../acisf10454/products/lightcurves/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.lc and ../../acisf10454/products/lightcurves/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Fri Oct 21 18:37:52 2011] 202.6
[Fri Oct 21 18:37:57 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:37:57 2011] Error reading totcts from fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35_src.pi.gz
[Fri Oct 21 18:37:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:37:57 2011] Using photon index=1.80, rate=0.00267, arf fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src35.arf
[Fri Oct 21 18:37:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:37:57 2011] Updating source flux to 3.1e-14
[Fri Oct 21 18:38:08 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting