[Fri Oct 21 18:32:11 2011] Detection parameters:
  Position = (284.6, 181.9) = 14 29 15.20 34 38 20.5
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 201.8 +/- 14.2
  Background counts = 1.2
  Rate = 0.007 +/- 0.0005

[Fri Oct 21 18:32:13 2011] Off-axis axis estimate = 1.42'
[Fri Oct 21 18:33:06 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:06 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct 21 18:33:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.901
[Fri Oct 21 18:33:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 18:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 18:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10454_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:07 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:07 2011] Fit fullrun_ccd3_acisf10454_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:21 2011] Spatial fit model total counts = 204.014000, observed total counts = 205.000000
[Fri Oct 21 18:33:21 2011] Offset between fit and detection position for source 3 = 0.710270 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.710270 pixels
  Position = (285.1, 182.4) = 14 29 15.20 34 38 20.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 203.2 +/- 14.3
  Background counts = 0.0
  Rate = 0.007 +/- 0.0005
[Fri Oct 21 18:33:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:21 2011] Source does appear to be extended
[Fri Oct 21 18:33:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:33:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:42 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct 21 18:33:42 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.768
[Fri Oct 21 18:33:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.44"
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10454_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:43 2011] fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:43 2011] Fit fullrun_ccd3_acisf10454_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:56 2011] Spatial fit model total counts = 204.493000, observed total counts = 205.000000
[Fri Oct 21 18:33:56 2011] Offset between fit and detection position for source 3 = 0.004041 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004041 pixels
  Position = (285.1, 182.4) = 14 29 15.20 34 38 20.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 203.7 +/- 14.3
  Background counts = 0.0
  Rate = 0.007 +/- 0.0005
[Fri Oct 21 18:33:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:56 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:56 2011] Source does appear to be extended
[Fri Oct 21 18:33:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:36:12 2011] Not overwriting source region fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 18:36:12 2011] Extracting stamp from image fullrun_ccd3_acisf10454_pi14-548_cl_sm2.00.img.gz, (265, 162) - (305, 202)
[Fri Oct 21 18:36:12 2011] Writing fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 18:36:14 2011] ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.evt and ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 18:36:14 2011] Size of ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.evt.gz[events] = 203 counts
[Fri Oct 21 18:36:14 2011] Mean chipx,y = (869.36, 869.93)
[Fri Oct 21 18:36:14 2011] Mean tdetx,y = (4262.07, 3930.36)
[Fri Oct 21 18:36:14 2011] chipx,y range = (849.00-887.00, 852.00-888.00)
[Fri Oct 21 18:36:14 2011] Size of ../../acisf10454/products/events/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Fri Oct 21 18:36:14 2011] ../../acisf10454/products/images/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.img and ../../acisf10454/products/images/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 18:36:14 2011] ../../acisf10454/products/spectra/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.pi and ../../acisf10454/products/spectra/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 18:36:17 2011] ../../acisf10454/products/lightcurves/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.lc and ../../acisf10454/products/lightcurves/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 18:37:52 2011] Keeping rmf generated by specextract
[Fri Oct 21 18:37:52 2011] 200.592
[Fri Oct 21 18:37:57 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:37:57 2011] Error reading totcts from fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 18:37:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:37:57 2011] Using photon index=1.80, rate=0.00673, arf fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 18:37:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:37:57 2011] Updating source flux to 7.8e-14
[Fri Oct 21 18:38:19 2011] Reading fit data from acisf10454/analysis//spectral/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_pl.csv
[Fri Oct 21 18:38:19 2011] Spectral fit parameter nH value = 6.48964e+13
[Fri Oct 21 18:38:19 2011] Spectral fit parameter PhoIndex value = 2.02002
[Fri Oct 21 18:38:19 2011] Failed to get F(0.3-8.0) from acisf10454/analysis//spectral/fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 18:38:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:38:19 2011] Using Nh = 6.5e+13, photon index=2.02, rate=0.00673, arf fullrun_ccd3_acisf10454_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 18:38:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:38:19 2011] Updating source flux to 7.7e-14