[Fri Oct 21 18:32:10 2011] Detection parameters:
  Position = (94.3, 650.5) = 14 30 3.55 34 40 58.8
  Extent = 3.6" x 2.6", rotation angle = 39 degrees
  Source counts = 84.3 +/- 10.3
  Background counts = 21.7
  Rate = 0.003 +/- 0.0003

[Fri Oct 21 18:32:11 2011] Off-axis axis estimate = 9.45'
[Fri Oct 21 18:33:05 2011] Using EEF radius (= 3.95 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:05 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Fri Oct 21 18:33:05 2011] source mask rpix=8.0, npix_max = 290, mask sum = 285, frac = 0.980
[Fri Oct 21 18:33:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.95"
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 21 18:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 21 18:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 18:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 21 18:33:06 2011] Fit fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 21 18:33:19 2011] Spatial fit model total counts = 110.866000, observed total counts = 113.000000
[Fri Oct 21 18:33:19 2011] Offset between fit and detection position for source 5 = 1.246396 pixels
[Fri Oct 21 18:33:19 2011] 111.199300 total counts/ 25.431500 bgd. counts: snr = 17.007414
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.246396 pixels
  Position = (94.7, 651.7) = 14 30 3.56 34 40 59.1
  Extent = 3.4 (2.7-4.6)", rotation angle = 0
  Source counts = 85.8 +/- 10.5
  Background counts = 25.4
  Rate = 0.003 +/- 0.0003
[Fri Oct 21 18:33:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:19 2011] Source does appear to be extended
[Fri Oct 21 18:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:33:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:40 2011] Initial guess for spatial extent in simple fitting = 3.38"
[Fri Oct 21 18:33:40 2011] source mask rpix=6.9, npix_max = 217, mask sum = 225, frac = 1.034
[Fri Oct 21 18:33:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.38"
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 21 18:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 21 18:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 18:33:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 21 18:33:41 2011] Fit fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 21 18:33:53 2011] Warning, spatial fit 3 centroid is now closest to src. 4
[Fri Oct 21 18:33:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:53 2011] Source does appear to be extended
[Fri Oct 21 18:33:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:35:21 2011] Not overwriting source region fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 21 18:35:21 2011] Extracting stamp from image fullrun_ccd2_acisf10454_pi14-548_cl_sm2.00.img.gz, (0, 497) - (249, 806)
[Fri Oct 21 18:35:21 2011] Writing fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5.gif
[Fri Oct 21 18:35:28 2011] ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.evt and ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 21 18:35:28 2011] Size of ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.evt.gz[events] = 119 counts
[Fri Oct 21 18:35:28 2011] Mean chipx,y = (643.96, 42.19)
[Fri Oct 21 18:35:28 2011] Mean tdetx,y = (3103.19, 3442.04)
[Fri Oct 21 18:35:28 2011] chipx,y range = (611.00-682.00, 5.00-69.00)
[Fri Oct 21 18:35:28 2011] Size of ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 166 counts
[Fri Oct 21 18:35:28 2011] ../../acisf10454/products/images/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.img and ../../acisf10454/products/images/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 21 18:35:28 2011] ../../acisf10454/products/spectra/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.pi and ../../acisf10454/products/spectra/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 21 18:35:28 2011] Not generating rmf since there are only 85 counts
[Fri Oct 21 18:35:31 2011] ../../acisf10454/products/lightcurves/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.lc and ../../acisf10454/products/lightcurves/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 21 18:36:11 2011] 161.355
[Fri Oct 21 18:37:56 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:37:56 2011] Error reading totcts from fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 21 18:37:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:37:57 2011] Using photon index=1.80, rate=0.00283, arf fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src5.arf
[Fri Oct 21 18:37:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:37:57 2011] Updating source flux to 4.3e-14
[Fri Oct 21 18:38:03 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting