[Fri Oct 21 18:32:09 2011] Detection parameters:
  Position = (582.3, 1019.1) = 14 29 44.10 34 44 0.5
  Extent = 2.7" x 1.6", rotation angle = 15 degrees
  Source counts = 314.1 +/- 18.4
  Background counts = 25.9
  Rate = 0.01 +/- 0.0006

[Fri Oct 21 18:32:11 2011] Off-axis axis estimate = 8.07'
[Fri Oct 21 18:33:05 2011] Using EEF radius (= 2.88 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:05 2011] Initial guess for spatial extent in simple fitting = 2.88"
[Fri Oct 21 18:33:05 2011] source mask rpix=5.8, npix_max = 161, mask sum = 156, frac = 0.967
[Fri Oct 21 18:33:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.88"
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 18:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 18:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10454_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:06 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:06 2011] Fit fullrun_ccd2_acisf10454_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:19 2011] Spatial fit model total counts = 360.235000, observed total counts = 361.000000
[Fri Oct 21 18:33:19 2011] Offset between fit and detection position for source 1 = 0.361344 pixels
[Fri Oct 21 18:33:19 2011] 360.494400 total counts/ 37.296400 bgd. counts: snr = 52.921873
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.361344 pixels
  Position = (582.2, 1019.5) = 14 29 44.12 34 44 0.4
  Extent = 2.8 (2.5-3.1)", rotation angle = 0
  Source counts = 323.2 +/- 19.0
  Background counts = 37.3
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 18:33:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:19 2011] Source does appear to be extended
[Fri Oct 21 18:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:33:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:40 2011] Initial guess for spatial extent in simple fitting = 2.78"
[Fri Oct 21 18:33:40 2011] source mask rpix=5.7, npix_max = 151, mask sum = 156, frac = 1.028
[Fri Oct 21 18:33:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.78"
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10454_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:41 2011] fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:41 2011] Fit fullrun_ccd2_acisf10454_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:53 2011] Spatial fit model total counts = 359.656000, observed total counts = 361.000000
[Fri Oct 21 18:33:53 2011] Offset between fit and detection position for source 1 = 0.024759 pixels
[Fri Oct 21 18:33:53 2011] 359.829500 total counts/ 40.254500 bgd. counts: snr = 50.369261
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024759 pixels
  Position = (582.2, 1019.5) = 14 29 44.13 34 44 0.4
  Extent = 2.8 (2.4-3.1)", rotation angle = 0
  Source counts = 319.6 +/- 19.0
  Background counts = 40.3
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 18:33:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:53 2011] Source does appear to be extended
[Fri Oct 21 18:33:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:35:21 2011] Not overwriting source region fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 18:35:21 2011] Extracting stamp from image fullrun_ccd2_acisf10454_pi14-548_cl_sm2.00.img.gz, (456, 893) - (708, 1146)
[Fri Oct 21 18:35:21 2011] Writing fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 18:35:23 2011] ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.evt and ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 18:35:23 2011] Size of ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.evt.gz[events] = 355 counts
[Fri Oct 21 18:35:23 2011] Mean chipx,y = (943.54, 574.33)
[Fri Oct 21 18:35:23 2011] Mean tdetx,y = (3635.33, 3142.46)
[Fri Oct 21 18:35:23 2011] chipx,y range = (906.00-975.00, 544.00-607.00)
[Fri Oct 21 18:35:23 2011] Size of ../../acisf10454/products/events/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 202 counts
[Fri Oct 21 18:35:23 2011] ../../acisf10454/products/images/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.img and ../../acisf10454/products/images/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 18:35:23 2011] ../../acisf10454/products/spectra/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.pi and ../../acisf10454/products/spectra/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 18:35:25 2011] ../../acisf10454/products/lightcurves/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.lc and ../../acisf10454/products/lightcurves/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 18:36:11 2011] Keeping rmf generated by specextract
[Fri Oct 21 18:36:11 2011] 165.568
[Fri Oct 21 18:37:56 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:37:56 2011] Error reading totcts from fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 18:37:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:37:57 2011] Using photon index=1.80, rate=0.0106, arf fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 18:37:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:37:57 2011] Updating source flux to 1.5e-13
[Fri Oct 21 18:38:08 2011] Reading fit data from acisf10454/analysis//spectral/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 18:38:08 2011] Spectral fit parameter nH value = 1.54336e+13
[Fri Oct 21 18:38:08 2011] Spectral fit parameter PhoIndex value = 2.07022
[Fri Oct 21 18:38:08 2011] Failed to get F(0.3-8.0) from acisf10454/analysis//spectral/fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 18:38:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:38:08 2011] Using Nh = 1.5e+13, photon index=2.07, rate=0.0106, arf fullrun_ccd2_acisf10454_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 18:38:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:38:08 2011] Updating source flux to 1.5e-13