[Fri Oct 21 18:32:07 2011] Detection parameters:
  Position = (371.7, 610.4) = 14 29 47.10 34 32 14.6
  Extent = 1.9" x 1.4", rotation angle = 9 degrees
  Source counts = 37.7 +/- 6.6
  Background counts = 5.3
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 18:32:07 2011] Off-axis axis estimate = 7.56'
[Fri Oct 21 18:33:03 2011] Using EEF radius (= 2.53 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:03 2011] Initial guess for spatial extent in simple fitting = 2.53"
[Fri Oct 21 18:33:03 2011] source mask rpix=5.1, npix_max = 127, mask sum = 121, frac = 0.951
[Fri Oct 21 18:33:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.53"
[Fri Oct 21 18:33:04 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 18:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:04 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 18:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 18:33:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10454_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:04 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:04 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:04 2011] Fit fullrun_ccd0_acisf10454_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:16 2011] Spatial fit model total counts = 63.276800, observed total counts = 63.000000
[Fri Oct 21 18:33:16 2011] Offset between fit and detection position for source 1 = 1.370365 pixels
[Fri Oct 21 18:33:16 2011] 62.833900 total counts/ 11.314800 bgd. counts: snr = 15.315981
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.370365 pixels
  Position = (372.7, 611.3) = 14 29 47.08 34 32 14.8
  Extent = 2.6 (2.0-3.6)", rotation angle = 0
  Source counts = 51.5 +/- 7.9
  Background counts = 11.3
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 18:33:16 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:16 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:16 2011] Source does appear to be extended
[Fri Oct 21 18:33:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:33:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:33:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:33:38 2011] Initial guess for spatial extent in simple fitting = 2.64"
[Fri Oct 21 18:33:38 2011] source mask rpix=5.4, npix_max = 137, mask sum = 144, frac = 1.045
[Fri Oct 21 18:33:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.64"
[Fri Oct 21 18:33:39 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:33:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:39 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:33:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:33:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10454_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:33:39 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:33:39 2011] fullrun_ccd0_acisf10454_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:33:39 2011] Fit fullrun_ccd0_acisf10454_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 18:33:50 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Oct 21 18:33:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 18:33:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 18:33:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 18:33:50 2011] Source does appear to be extended
[Fri Oct 21 18:33:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:34:14 2011] Not overwriting source region fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 18:34:14 2011] Extracting stamp from image fullrun_ccd0_acisf10454_pi14-548_cl_sm2.00.img.gz, (252, 490) - (494, 732)
[Fri Oct 21 18:34:15 2011] Writing fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 18:34:15 2011] ../../acisf10454/products/events/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.evt and ../../acisf10454/products/events/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 18:34:15 2011] Size of ../../acisf10454/products/events/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.evt.gz[events] = 63 counts
[Fri Oct 21 18:34:15 2011] Mean chipx,y = (572.59, 305.22)
[Fri Oct 21 18:34:15 2011] Mean tdetx,y = (3366.22, 4559.41)
[Fri Oct 21 18:34:15 2011] chipx,y range = (550.00-609.00, 274.00-339.00)
[Fri Oct 21 18:34:15 2011] Size of ../../acisf10454/products/events/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 146 counts
[Fri Oct 21 18:34:15 2011] ../../acisf10454/products/images/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.img and ../../acisf10454/products/images/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 18:34:15 2011] ../../acisf10454/products/spectra/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.pi and ../../acisf10454/products/spectra/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 18:34:15 2011] Not generating rmf since there are only 51 counts
[Fri Oct 21 18:34:18 2011] ../../acisf10454/products/lightcurves/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.lc and ../../acisf10454/products/lightcurves/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 18:34:40 2011] 175.138
[Fri Oct 21 18:37:56 2011] Updating aperture counts using extracted products
[Fri Oct 21 18:37:56 2011] Error reading totcts from fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 18:37:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 18:37:56 2011] Using photon index=1.80, rate=0.0017, arf fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 18:37:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 18:37:56 2011] Updating source flux to 2.3e-14
[Fri Oct 21 18:38:01 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 18:38:02 2011] acisf10454/analysis//spectral/fullrun_ccd0_acisf10454_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete