[Sun Oct 23 03:48:54 2011] Detection parameters:
  Position = (1004.6, 928.7) = 14 26 36.41 33 38 6.6
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 22.1 +/- 4.8
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Sun Oct 23 03:48:55 2011] Off-axis axis estimate = 1.80'
[Sun Oct 23 03:49:49 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:49:49 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Oct 23 03:49:49 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.259
[Sun Oct 23 03:49:49 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Sun Oct 23 03:49:51 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 23 03:49:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3.csv
[Sun Oct 23 03:49:51 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 23 03:49:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3.csv
[Sun Oct 23 03:49:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10453_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:49:51 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 23 03:49:51 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 23 03:49:51 2011] Fit fullrun_ccd0_acisf10453_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 23 03:51:01 2011] Spatial fit model total counts = 23.671100, observed total counts = 23.000000
[Sun Oct 23 03:51:01 2011] Offset between fit and detection position for source 4 = 0.719161 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.719161 pixels
  Position = (1005.2, 929.2) = 14 26 36.41 33 38 6.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.7 +/- 4.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sun Oct 23 03:51:01 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:51:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:51:01 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:51:01 2011] Source does appear to be extended
[Sun Oct 23 03:51:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:51:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:51:22 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Oct 23 03:51:22 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.977
[Sun Oct 23 03:51:22 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.50"
[Sun Oct 23 04:17:02 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 23 04:17:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3.csv
[Sun Oct 23 04:17:02 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 23 04:17:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3.csv
[Sun Oct 23 04:17:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10453_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:17:02 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 23 04:17:02 2011] fullrun_ccd0_acisf10453_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 23 04:17:02 2011] Fit fullrun_ccd0_acisf10453_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 23 05:10:04 2011] Spatial fit model total counts = 24.111400, observed total counts = 23.000000
[Sun Oct 23 05:10:04 2011] Offset between fit and detection position for source 4 = 0.032514 pixels
[Sun Oct 23 05:10:04 2011] 24.108028 total counts/ 0.005328 bgd. counts: snr = 330.216422
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.032514 pixels
  Position = (1005.1, 929.2) = 14 26 36.41 33 38 6.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 24.1 +/- 4.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sun Oct 23 05:10:04 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 05:10:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 05:10:04 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 05:10:04 2011] Source does appear to be extended
[Sun Oct 23 05:10:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:10:24 2011] Writing source region out to fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4_src.reg
[Sun Oct 23 05:10:24 2011] Extracting stamp from image fullrun_ccd0_acisf10453_pi14-548_cl_sm2.00.img.gz, (983, 907) - (1027, 951)
[Sun Oct 23 05:10:24 2011] Writing fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4.gif
[Sun Oct 23 05:12:28 2011] Size of ../../acisf10453/products/events/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4_src.evt.gz[events] = 23 counts
[Sun Oct 23 05:12:28 2011] Mean chipx,y = (916.65, 962.65)
[Sun Oct 23 05:12:28 2011] Mean tdetx,y = (4023.65, 4215.35)
[Sun Oct 23 05:12:28 2011] chipx,y range = (901.00-938.00, 944.00-977.00)
[Sun Oct 23 05:12:28 2011] Size of ../../acisf10453/products/events/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 8 counts
[Sun Oct 23 05:12:29 2011] Not generating rmf since there are only 24 counts
[Sun Oct 23 05:12:29 2011] arf not found, will run specextract
[Sun Oct 23 05:12:55 2011] ../../acisf10453/products/spectra/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4.warf not found
[Sun Oct 23 05:12:55 2011] ../../acisf10453/products/spectra/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4.wrmf not found
[Sun Oct 23 05:12:55 2011] Removal of ../../acisf10453/products/spectra/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4.soff failed
[Sun Oct 23 05:17:41 2011] Spectrum 4 has only 24 counts, deleting rmf
[Sun Oct 23 05:17:41 2011] 191.024
[Sun Oct 23 05:48:28 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:48:28 2011] Error reading totcts from fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Oct 23 05:48:28 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:48:28 2011] Using photon index=1.80, rate=0.000695, arf fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4.arf
[Sun Oct 23 05:48:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:48:28 2011] Updating source flux to 8.6e-15
[Sun Oct 23 05:48:32 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 05:48:33 2011] acisf10453/analysis//spectral/fullrun_ccd0_acisf10453_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete