[Wed Oct 26 15:49:00 2011] Detection parameters:
  Position = (531.0, 1130.2) = 14 32 41.64 33 41 27.6
  Extent = 3.8" x 2.7", rotation angle = 5 degrees
  Source counts = 69.5 +/- 9.5
  Background counts = 21.5
  Rate = 0.002 +/- 0.0003

[Wed Oct 26 15:49:02 2011] Off-axis axis estimate = 9.23'
[Wed Oct 26 15:50:00 2011] Using EEF radius (= 3.76 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:50:00 2011] Initial guess for spatial extent in simple fitting = 3.76"
[Wed Oct 26 15:50:00 2011] source mask rpix=7.6, npix_max = 265, mask sum = 256, frac = 0.964
[Wed Oct 26 15:50:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.76"
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 15:50:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 15:50:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:50:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:50:00 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:50:16 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 43.861491 pixels away
[Wed Oct 26 15:50:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:16 2011] Assessing source extent using major
[Wed Oct 26 15:50:16 2011] Source does appear to be extended
[Wed Oct 26 15:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.42
[Wed Oct 26 15:50:40 2011] Using EEF radius (= 3.76 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:50:40 2011] Initial guess for spatial extent in simple fitting = 3.76"
[Wed Oct 26 15:50:40 2011] source mask rpix=7.6, npix_max = 265, mask sum = 256, frac = 0.964
[Wed Oct 26 15:50:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.76"
[Wed Oct 26 15:50:41 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 15:50:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:50:41 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 15:50:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:50:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:50:42 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:50:54 2011] Spatial fit model total counts = 91.998600, observed total counts = 92.000000
[Wed Oct 26 15:50:54 2011] Offset between fit and detection position for source 2 = 1.101604 pixels
[Wed Oct 26 15:50:54 2011] 92.143000 total counts/ 39.223800 bgd. counts: snr = 8.449644
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.101604 pixels
  Position = (532.0, 1130.5) = 14 32 41.62 33 41 27.5
  Extent = 2.6 (1.6-4.0)", rotation angle = 0
  Source counts = 52.9 +/- 9.6
  Background counts = 39.2
  Rate = 0.002 +/- 0.0003
[Wed Oct 26 15:50:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:54 2011] Source does appear to be extended
[Wed Oct 26 15:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:54:33 2011] Not overwriting source region fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 26 15:54:33 2011] Extracting stamp from image fullrun_ccd3_acisf10452_pi14-548_cl_sm2.00.img.gz, (415, 1013) - (649, 1248)
[Wed Oct 26 15:54:33 2011] Writing fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2.gif
[Wed Oct 26 15:54:43 2011] ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.evt and ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 26 15:54:43 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.evt.gz[events] = 85 counts
[Wed Oct 26 15:54:43 2011] Mean chipx,y = (112.46, 264.27)
[Wed Oct 26 15:54:43 2011] Mean tdetx,y = (4867.73, 3173.46)
[Wed Oct 26 15:54:43 2011] chipx,y range = (81.00-143.00, 235.00-292.00)
[Wed Oct 26 15:54:43 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 170 counts
[Wed Oct 26 15:54:43 2011] ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.img and ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 26 15:54:43 2011] ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.pi and ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 26 15:54:43 2011] Not generating rmf since there are only 52 counts
[Wed Oct 26 15:54:46 2011] ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.lc and ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 26 15:56:10 2011] 156.357
[Wed Oct 26 15:56:16 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:56:16 2011] Error reading totcts from fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 26 15:56:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:56:16 2011] Using photon index=1.80, rate=0.00154, arf fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src2.arf
[Wed Oct 26 15:56:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:56:16 2011] Updating source flux to 2.4e-14
[Wed Oct 26 15:56:24 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting