[Wed Oct 26 15:49:01 2011] Detection parameters:
  Position = (713.2, 556.2) = 14 32 34.45 33 36 45.3
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Wed Oct 26 15:49:02 2011] Off-axis axis estimate = 4.31'
[Wed Oct 26 15:50:00 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:00 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Oct 26 15:50:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.098
[Wed Oct 26 15:50:00 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.93"
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20.ximg exists
[Wed Oct 26 15:50:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20.csv
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20_1.ximg exists
[Wed Oct 26 15:50:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20.csv
[Wed Oct 26 15:50:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:01 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed Oct 26 15:50:01 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Oct 26 15:50:01 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Oct 26 15:50:16 2011] Spatial fit model total counts = 11.896500, observed total counts = 12.000000
[Wed Oct 26 15:50:16 2011] Offset between fit and detection position for source 15 = 0.977147 pixels
[Wed Oct 26 15:50:16 2011] 11.768640 total counts/ 1.720740 bgd. counts: snr = 7.659804
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.977147 pixels
  Position = (714.0, 556.9) = 14 32 34.44 33 36 45.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.0 +/- 3.4
  Background counts = 1.7
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:16 2011] Source does appear to be extended
[Wed Oct 26 15:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:50:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:40 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Oct 26 15:50:40 2011] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.543
[Wed Oct 26 15:50:40 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.42"
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20.ximg exists
[Wed Oct 26 15:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20.csv
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20_1.ximg exists
[Wed Oct 26 15:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20.csv
[Wed Oct 26 15:50:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Oct 26 15:50:42 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Oct 26 15:50:54 2011] Spatial fit model total counts = 12.051100, observed total counts = 12.000000
[Wed Oct 26 15:50:54 2011] Offset between fit and detection position for source 15 = 0.075773 pixels
[Wed Oct 26 15:50:54 2011] 11.663359 total counts/ 0.784059 bgd. counts: snr = 12.286455
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.075773 pixels
  Position = (714.0, 556.9) = 14 32 34.44 33 36 45.4
  Extent = 0.4 (0.3-0.8)", rotation angle = 0
  Source counts = 10.9 +/- 3.4
  Background counts = 0.8
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:54 2011] Source does appear to be extended
[Wed Oct 26 15:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:54:34 2011] Not overwriting source region fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.reg
[Wed Oct 26 15:54:34 2011] Extracting stamp from image fullrun_ccd3_acisf10452_pi14-548_cl_sm2.00.img.gz, (695, 538) - (733, 576)
[Wed Oct 26 15:54:34 2011] Writing fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15.gif
[Wed Oct 26 15:55:27 2011] ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.evt and ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Wed Oct 26 15:55:27 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.evt.gz[events] = 11 counts
[Wed Oct 26 15:55:27 2011] Mean chipx,y = (582.73, 642.82)
[Wed Oct 26 15:55:27 2011] Mean tdetx,y = (4489.18, 3643.73)
[Wed Oct 26 15:55:27 2011] chipx,y range = (570.00-600.00, 626.00-658.00)
[Wed Oct 26 15:55:27 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 3 counts
[Wed Oct 26 15:55:27 2011] ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.img and ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Wed Oct 26 15:55:27 2011] ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.pi and ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Wed Oct 26 15:55:27 2011] Not generating rmf since there are only 10 counts
[Wed Oct 26 15:55:30 2011] ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.lc and ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Wed Oct 26 15:56:10 2011] 186.274
[Wed Oct 26 15:56:16 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:56:16 2011] Error reading totcts from fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15_src.pi.gz
[Wed Oct 26 15:56:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:56:16 2011] Using photon index=1.80, rate=0.000317, arf fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src15.arf
[Wed Oct 26 15:56:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:56:16 2011] Updating source flux to 4e-15
[Wed Oct 26 15:56:24 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting