[Wed Oct 26 15:49:00 2011] Detection parameters:
  Position = (948.6, 420.2) = 14 32 25.19 33 35 38.3
  Extent = 0.7" x 0.5", rotation angle = 177 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Wed Oct 26 15:49:02 2011] Off-axis axis estimate = 3.36'
[Wed Oct 26 15:50:00 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:00 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Wed Oct 26 15:50:00 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.888
[Wed Oct 26 15:50:00 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.66"
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src15.ximg exists
[Wed Oct 26 15:50:00 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src15_1.ximg exists
[Wed Oct 26 15:50:00 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass0_src15 appears to have run properly
[Wed Oct 26 15:50:01 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed Oct 26 15:50:01 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Oct 26 15:50:01 2011] Fit fullrun_ccd3_acisf10452_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Oct 26 15:50:16 2011] Spatial fit model total counts = 17.285900, observed total counts = 17.000000
[Wed Oct 26 15:50:16 2011] Offset between fit and detection position for source 13 = 0.883999 pixels
[Wed Oct 26 15:50:16 2011] 16.801650 total counts/ 5.834850 bgd. counts: snr = 4.540096
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.883999 pixels
  Position = (949.1, 420.9) = 14 32 25.18 33 35 38.4
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 11.0 +/- 4.1
  Background counts = 5.8
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:16 2011] Source does appear to be extended
[Wed Oct 26 15:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:50:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:40 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct 26 15:50:40 2011] source mask rpix=1.2, npix_max = 10, mask sum = 16, frac = 1.462
[Wed Oct 26 15:50:40 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.57"
[Wed Oct 26 15:50:41 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15.ximg exists
[Wed Oct 26 15:50:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 15:50:41 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Oct 26 15:50:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 15:50:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Oct 26 15:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 26 15:50:42 2011] fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Oct 26 15:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 26 15:50:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10452_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:54 2011] Spatial fit model total counts = 17.304800, observed total counts = 19.000000
[Wed Oct 26 15:50:54 2011] Offset between fit and detection position for source 13 = 0.042776 pixels
[Wed Oct 26 15:50:54 2011] 16.255180 total counts/ 6.105380 bgd. counts: snr = 4.107723
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.042776 pixels
  Position = (949.1, 420.9) = 14 32 25.18 33 35 38.5
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 10.1 +/- 4.0
  Background counts = 6.1
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:54 2011] Source does appear to be extended
[Wed Oct 26 15:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:54:34 2011] Not overwriting source region fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.reg
[Wed Oct 26 15:54:34 2011] Extracting stamp from image fullrun_ccd3_acisf10452_pi14-548_cl_sm2.00.img.gz, (923, 395) - (975, 447)
[Wed Oct 26 15:54:34 2011] Writing fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13.gif
[Wed Oct 26 15:55:15 2011] ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.evt and ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed Oct 26 15:55:15 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.evt.gz[events] = 13 counts
[Wed Oct 26 15:55:15 2011] Mean chipx,y = (855.31, 625.46)
[Wed Oct 26 15:55:15 2011] Mean tdetx,y = (4506.54, 3916.31)
[Wed Oct 26 15:55:15 2011] chipx,y range = (842.00-874.00, 606.00-640.00)
[Wed Oct 26 15:55:15 2011] Size of ../../acisf10452/products/events/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 15:55:15 2011] ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.img and ../../acisf10452/products/images/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed Oct 26 15:55:15 2011] ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.pi and ../../acisf10452/products/spectra/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed Oct 26 15:55:15 2011] Not generating rmf since there are only 10 counts
[Wed Oct 26 15:55:18 2011] ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.lc and ../../acisf10452/products/lightcurves/fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed Oct 26 15:56:10 2011] 193.231
[Wed Oct 26 15:56:16 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:56:16 2011] Error reading totcts from fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Oct 26 15:56:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:56:16 2011] Using photon index=1.80, rate=0.000296, arf fullrun_ccd3_acisf10452_pi14-548_pass1_cl_src13.arf
[Wed Oct 26 15:56:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:56:16 2011] Updating source flux to 3.6e-15
[Wed Oct 26 15:56:24 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting