[Wed Oct 26 15:48:58 2011] Detection parameters:
  Position = (1222.0, 670.5) = 14 32 36.66 33 30 35.4
  Extent = 0.5" x 0.5", rotation angle = 74 degrees
  Source counts = 20.9 +/- 4.7
  Background counts = 1.1
  Rate = 0.0006 +/- 0.0001

[Wed Oct 26 15:49:00 2011] Off-axis axis estimate = 2.25'
[Wed Oct 26 15:49:57 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:49:57 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Oct 26 15:49:57 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.732
[Wed Oct 26 15:49:57 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.46"
[Wed Oct 26 15:49:58 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 26 15:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6.csv
[Wed Oct 26 15:49:58 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 26 15:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6.csv
[Wed Oct 26 15:49:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10452_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:49:59 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 26 15:49:59 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 26 15:49:59 2011] Fit fullrun_ccd2_acisf10452_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct 26 15:50:13 2011] Spatial fit model total counts = 23.360700, observed total counts = 23.000000
[Wed Oct 26 15:50:13 2011] Offset between fit and detection position for source 4 = 0.709658 pixels
[Wed Oct 26 15:50:13 2011] 23.106764 total counts/ 0.000064 bgd. counts: snr = 2892.031719
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.709658 pixels
  Position = (1222.5, 671.0) = 14 32 36.66 33 30 35.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 23.1 +/- 4.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Wed Oct 26 15:50:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:13 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:13 2011] Source does appear to be extended
[Wed Oct 26 15:50:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:50:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:39 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct 26 15:50:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.080
[Wed Oct 26 15:50:39 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.57"
[Wed Oct 26 15:50:40 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 26 15:50:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6.csv
[Wed Oct 26 15:50:40 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 26 15:50:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6.csv
[Wed Oct 26 15:50:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10452_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:40 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 26 15:50:40 2011] fullrun_ccd2_acisf10452_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 26 15:50:40 2011] Fit fullrun_ccd2_acisf10452_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct 26 15:50:51 2011] Spatial fit model total counts = 21.898100, observed total counts = 23.000000
[Wed Oct 26 15:50:51 2011] Offset between fit and detection position for source 4 = 0.030214 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.030214 pixels
  Position = (1222.5, 670.9) = 14 32 36.66 33 30 35.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 22.1 +/- 4.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 15:50:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:51 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:51 2011] Source does appear to be extended
[Wed Oct 26 15:50:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:53:03 2011] Not overwriting source region fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.reg
[Wed Oct 26 15:53:03 2011] Extracting stamp from image fullrun_ccd2_acisf10452_pi14-548_cl_sm2.00.img.gz, (1196, 644) - (1249, 698)
[Wed Oct 26 15:53:03 2011] Writing fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4.gif
[Wed Oct 26 15:53:20 2011] ../../acisf10452/products/events/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.evt and ../../acisf10452/products/events/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Oct 26 15:53:20 2011] Size of ../../acisf10452/products/events/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.evt.gz[events] = 22 counts
[Wed Oct 26 15:53:20 2011] Mean chipx,y = (64.68, 771.32)
[Wed Oct 26 15:53:20 2011] Mean tdetx,y = (3832.32, 4021.32)
[Wed Oct 26 15:53:20 2011] chipx,y range = (48.00-81.00, 755.00-791.00)
[Wed Oct 26 15:53:20 2011] Size of ../../acisf10452/products/events/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 15:53:20 2011] ../../acisf10452/products/images/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.img and ../../acisf10452/products/images/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Oct 26 15:53:20 2011] ../../acisf10452/products/spectra/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.pi and ../../acisf10452/products/spectra/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Oct 26 15:53:20 2011] Not generating rmf since there are only 22 counts
[Wed Oct 26 15:53:23 2011] ../../acisf10452/products/lightcurves/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.lc and ../../acisf10452/products/lightcurves/fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Oct 26 15:54:33 2011] 201.609
[Wed Oct 26 15:56:15 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:56:15 2011] Error reading totcts from fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Oct 26 15:56:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:56:15 2011] Using photon index=1.80, rate=0.000645, arf fullrun_ccd2_acisf10452_pi14-548_pass1_cl_src4.arf
[Wed Oct 26 15:56:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:56:15 2011] Updating source flux to 7.4e-15
[Wed Oct 26 15:56:21 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting