[Wed Oct 26 15:48:56 2011] Detection parameters:
  Position = (777.2, 1173.5) = 14 32 20.64 33 29 57.0
  Extent = 0.5" x 0.5", rotation angle = 162 degrees
  Source counts = 11.0 +/- 3.5
  Background counts = 1.0
  Rate = 0.0003 +/- 0.0001

[Wed Oct 26 15:48:56 2011] Off-axis axis estimate = 3.34'
[Wed Oct 26 15:49:55 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:49:55 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Oct 26 15:49:55 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.895
[Wed Oct 26 15:49:55 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.65"
[Wed Oct 26 15:49:56 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct 26 15:49:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 15:49:56 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct 26 15:49:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 15:49:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10452_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:49:56 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct 26 15:49:56 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct 26 15:49:56 2011] Fit fullrun_ccd0_acisf10452_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct 26 15:50:09 2011] Spatial fit model total counts = 14.991600, observed total counts = 15.000000
[Wed Oct 26 15:50:09 2011] Offset between fit and detection position for source 15 = 0.735427 pixels
[Wed Oct 26 15:50:09 2011] 14.974260 total counts/ 3.421860 bgd. counts: snr = 6.245124
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.735427 pixels
  Position = (777.8, 1174.0) = 14 32 20.64 33 29 57.0
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 3.9
  Background counts = 3.4
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:09 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:09 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:09 2011] Source does appear to be extended
[Wed Oct 26 15:50:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:50:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:37 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Oct 26 15:50:37 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.185
[Wed Oct 26 15:50:37 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.54"
[Wed Oct 26 15:50:38 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 15:50:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 15:50:38 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 15:50:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 15:50:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10452_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:38 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 15:50:38 2011] fullrun_ccd0_acisf10452_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 15:50:38 2011] Fit fullrun_ccd0_acisf10452_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 15:50:47 2011] Spatial fit model total counts = 14.798300, observed total counts = 15.000000
[Wed Oct 26 15:50:47 2011] Offset between fit and detection position for source 15 = 0.020373 pixels
[Wed Oct 26 15:50:47 2011] 14.663800 total counts/ 3.278200 bgd. counts: snr = 6.288372
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.020373 pixels
  Position = (777.8, 1174.0) = 14 32 20.64 33 29 57.0
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.4 +/- 3.8
  Background counts = 3.3
  Rate = 0.0003 +/- 0.0001
[Wed Oct 26 15:50:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:47 2011] Source does appear to be extended
[Wed Oct 26 15:50:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:51:13 2011] Not overwriting source region fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.reg
[Wed Oct 26 15:51:13 2011] Extracting stamp from image fullrun_ccd0_acisf10452_pi14-548_cl_sm2.00.img.gz, (754, 1150) - (802, 1198)
[Wed Oct 26 15:51:13 2011] Writing fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15.gif
[Wed Oct 26 15:51:48 2011] ../../acisf10452/products/events/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.evt and ../../acisf10452/products/events/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Wed Oct 26 15:51:48 2011] Size of ../../acisf10452/products/events/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.evt.gz[events] = 12 counts
[Wed Oct 26 15:51:48 2011] Mean chipx,y = (729.58, 935.00)
[Wed Oct 26 15:51:48 2011] Mean tdetx,y = (3996.00, 4402.42)
[Wed Oct 26 15:51:48 2011] chipx,y range = (713.00-744.00, 923.00-948.00)
[Wed Oct 26 15:51:48 2011] Size of ../../acisf10452/products/events/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 8 counts
[Wed Oct 26 15:51:48 2011] ../../acisf10452/products/images/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.img and ../../acisf10452/products/images/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Wed Oct 26 15:51:48 2011] ../../acisf10452/products/spectra/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.pi and ../../acisf10452/products/spectra/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Wed Oct 26 15:51:48 2011] Not generating rmf since there are only 11 counts
[Wed Oct 26 15:51:50 2011] ../../acisf10452/products/lightcurves/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.lc and ../../acisf10452/products/lightcurves/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Wed Oct 26 15:52:16 2011] 195.708
[Wed Oct 26 15:56:14 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:56:14 2011] Error reading totcts from fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_src.pi.gz
[Wed Oct 26 15:56:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:56:15 2011] Using photon index=1.80, rate=0.000332, arf fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15.arf
[Wed Oct 26 15:56:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:56:15 2011] Updating source flux to 4e-15
[Wed Oct 26 15:56:19 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 15:56:20 2011] acisf10452/analysis//spectral/fullrun_ccd0_acisf10452_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete