[Sat Oct 22 05:48:50 2011] Detection parameters:
  Position = (683.1, 707.3) = 14 29 16.89 34 2 30.1
  Extent = 0.6" x 0.5", rotation angle = 59 degrees
  Source counts = 16.3 +/- 4.1
  Background counts = 0.7
  Rate = 0.0007 +/- 0.0002

[Sat Oct 22 05:48:51 2011] Off-axis axis estimate = 5.40'
[Sat Oct 22 05:49:42 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:49:42 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Sat Oct 22 05:49:42 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.858
[Sat Oct 22 05:49:42 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.35"
[Sat Oct 22 05:49:42 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7.ximg exists
[Sat Oct 22 05:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7.csv
[Sat Oct 22 05:49:42 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Oct 22 05:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7.csv
[Sat Oct 22 05:49:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:49:43 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Oct 22 05:49:43 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Oct 22 05:49:43 2011] Fit fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Oct 22 05:49:52 2011] Spatial fit model total counts = 27.967000, observed total counts = 27.000000
[Sat Oct 22 05:49:52 2011] Offset between fit and detection position for source 5 = 0.565243 pixels
[Sat Oct 22 05:49:52 2011] 28.038040 total counts/ 8.246440 bgd. counts: snr = 6.892038
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.565243 pixels
  Position = (683.6, 707.6) = 14 29 16.89 34 2 30.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 19.8 +/- 5.3
  Background counts = 8.2
  Rate = 0.0009 +/- 0.0002
[Sat Oct 22 05:49:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:49:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:49:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:49:52 2011] Source does appear to be extended
[Sat Oct 22 05:49:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:50:10 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sat Oct 22 05:50:10 2011] source mask rpix=1.3, npix_max = 12, mask sum = 6, frac = 0.464
[Sat Oct 22 05:50:10 2011] Skipping simple spatial due to low active detector fraction
[Sat Oct 22 05:50:19 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:50:19 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:50:19 2011] Source does appear to be extended
[Sat Oct 22 05:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:52:24 2011] Not overwriting source region fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 22 05:52:24 2011] Extracting stamp from image fullrun_ccd3_acisf10450_pi14-548_cl_sm2.00.img.gz, (654, 678) - (713, 737)
[Sat Oct 22 05:52:24 2011] Writing fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5.gif
[Sat Oct 22 05:52:43 2011] ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.evt and ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 22 05:52:43 2011] Size of ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.evt.gz[events] = 20 counts
[Sat Oct 22 05:52:43 2011] Mean chipx,y = (492.65, 543.80)
[Sat Oct 22 05:52:43 2011] Mean tdetx,y = (4588.20, 3553.65)
[Sat Oct 22 05:52:43 2011] chipx,y range = (477.00-511.00, 528.00-561.00)
[Sat Oct 22 05:52:43 2011] Size of ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 4 counts
[Sat Oct 22 05:52:43 2011] ../../acisf10450/products/images/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.img and ../../acisf10450/products/images/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 22 05:52:43 2011] ../../acisf10450/products/spectra/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.pi and ../../acisf10450/products/spectra/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 22 05:52:43 2011] Not generating rmf since there are only 19 counts
[Sat Oct 22 05:52:46 2011] ../../acisf10450/products/lightcurves/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.lc and ../../acisf10450/products/lightcurves/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 22 05:53:20 2011] 178.675
[Sat Oct 22 05:53:27 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:53:27 2011] Error reading totcts from fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 22 05:53:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:27 2011] Using photon index=1.80, rate=0.000871, arf fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src5.arf
[Sat Oct 22 05:53:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:27 2011] Updating source flux to 1.2e-14
[Sat Oct 22 05:53:44 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting