[Sat Oct 22 05:48:50 2011] Detection parameters:
  Position = (758.3, 426.6) = 14 29 13.91 34 0 12.0
  Extent = 0.5" x 0.5", rotation angle = 115 degrees
  Source counts = 146.9 +/- 12.2
  Background counts = 2.1
  Rate = 0.006 +/- 0.0005

[Sat Oct 22 05:48:51 2011] Off-axis axis estimate = 3.14'
[Sat Oct 22 05:49:42 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:49:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:49:42 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sat Oct 22 05:49:42 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.747
[Sat Oct 22 05:49:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.61"
[Sat Oct 22 05:49:42 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:42 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:49:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10450_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:49:43 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:49:43 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:49:43 2011] Fit fullrun_ccd3_acisf10450_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:49:52 2011] Spatial fit model total counts = 151.636000, observed total counts = 152.000000
[Sat Oct 22 05:49:52 2011] Offset between fit and detection position for source 3 = 0.718351 pixels
[Sat Oct 22 05:49:52 2011] 151.601710 total counts/ 5.994710 bgd. counts: snr = 59.470031
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.718351 pixels
  Position = (758.8, 427.2) = 14 29 13.92 34 0 12.0
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 145.6 +/- 12.3
  Background counts = 6.0
  Rate = 0.006 +/- 0.0005
[Sat Oct 22 05:49:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:49:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:49:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:49:52 2011] Source does appear to be extended
[Sat Oct 22 05:49:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:50:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:50:10 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Oct 22 05:50:10 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.265
[Sat Oct 22 05:50:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.63"
[Sat Oct 22 05:50:11 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:50:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:11 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:50:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10450_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:50:11 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:50:11 2011] fullrun_ccd3_acisf10450_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:50:11 2011] Fit fullrun_ccd3_acisf10450_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:50:19 2011] Spatial fit model total counts = 153.954000, observed total counts = 154.000000
[Sat Oct 22 05:50:19 2011] Offset between fit and detection position for source 3 = 0.038739 pixels
[Sat Oct 22 05:50:19 2011] 154.193500 total counts/ 10.467500 bgd. counts: snr = 44.423611
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.038739 pixels
  Position = (758.8, 427.1) = 14 29 13.92 34 0 12.0
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 143.7 +/- 12.4
  Background counts = 10.5
  Rate = 0.006 +/- 0.0005
[Sat Oct 22 05:50:19 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:50:19 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:50:19 2011] Source does appear to be extended
[Sat Oct 22 05:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:52:24 2011] Not overwriting source region fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 22 05:52:24 2011] Extracting stamp from image fullrun_ccd3_acisf10450_pi14-548_cl_sm2.00.img.gz, (731, 399) - (787, 455)
[Sat Oct 22 05:52:24 2011] Writing fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3.gif
[Sat Oct 22 05:52:25 2011] ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.evt and ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 22 05:52:25 2011] Size of ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.evt.gz[events] = 148 counts
[Sat Oct 22 05:52:25 2011] Mean chipx,y = (737.49, 702.58)
[Sat Oct 22 05:52:25 2011] Mean tdetx,y = (4429.42, 3798.49)
[Sat Oct 22 05:52:25 2011] chipx,y range = (719.00-756.00, 685.00-720.00)
[Sat Oct 22 05:52:25 2011] Size of ../../acisf10450/products/events/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 16 counts
[Sat Oct 22 05:52:25 2011] ../../acisf10450/products/images/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.img and ../../acisf10450/products/images/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 22 05:52:25 2011] ../../acisf10450/products/spectra/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.pi and ../../acisf10450/products/spectra/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 22 05:52:28 2011] ../../acisf10450/products/lightcurves/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.lc and ../../acisf10450/products/lightcurves/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 22 05:53:20 2011] Keeping rmf generated by specextract
[Sat Oct 22 05:53:20 2011] 195.068
[Sat Oct 22 05:53:27 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:53:27 2011] Error reading totcts from fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 22 05:53:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:27 2011] Using photon index=1.80, rate=0.00632, arf fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 05:53:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:27 2011] Updating source flux to 7.7e-14
[Sat Oct 22 05:53:47 2011] Reading fit data from acisf10450/analysis//spectral/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_pl.csv
[Sat Oct 22 05:53:47 2011] Spectral fit parameter nH value = 1.1181e+14
[Sat Oct 22 05:53:47 2011] Spectral fit parameter PhoIndex value = 1.97437
[Sat Oct 22 05:53:47 2011] Failed to get F(0.3-8.0) from acisf10450/analysis//spectral/fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 05:53:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:47 2011] Using Nh = 1.1e+14, photon index=1.97, rate=0.00632, arf fullrun_ccd3_acisf10450_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 05:53:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:47 2011] Updating source flux to 7.7e-14