[Sat Oct 22 05:48:49 2011] Detection parameters:
  Position = (804.3, 378.9) = 14 29 39.72 33 53 36.9
  Extent = 1.5" x 1.2", rotation angle = 77 degrees
  Source counts = 351.9 +/- 19.1
  Background counts = 13.1
  Rate = 0.02 +/- 0.0008

[Sat Oct 22 05:48:50 2011] Off-axis axis estimate = 5.98'
[Sat Oct 22 05:49:41 2011] Using EEF radius (= 1.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:49:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:49:41 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Sat Oct 22 05:49:41 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.973
[Sat Oct 22 05:49:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.62"
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:49:41 2011] Fit fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:49:50 2011] Spatial fit model total counts = 361.078000, observed total counts = 363.000000
[Sat Oct 22 05:49:50 2011] Offset between fit and detection position for source 11 = 0.609754 pixels
[Sat Oct 22 05:49:50 2011] 361.975200 total counts/ 19.526200 bgd. counts: snr = 77.497383
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.609754 pixels
  Position = (804.8, 379.3) = 14 29 39.72 33 53 36.9
  Extent = 1.7 (1.5-1.8)", rotation angle = 0
  Source counts = 342.4 +/- 19.0
  Background counts = 19.5
  Rate = 0.02 +/- 0.0008
[Sat Oct 22 05:49:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:49:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:49:50 2011] Source does appear to be extended
[Sat Oct 22 05:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:50:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:50:09 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Sat Oct 22 05:50:09 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.037
[Sat Oct 22 05:50:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.69"
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:50:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:50:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:50:10 2011] Fit fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:50:18 2011] Spatial fit model total counts = 364.431000, observed total counts = 363.000000
[Sat Oct 22 05:50:18 2011] Offset between fit and detection position for source 11 = 0.015376 pixels
[Sat Oct 22 05:50:18 2011] 365.491900 total counts/ 24.061900 bgd. counts: snr = 69.604404
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.015376 pixels
  Position = (804.8, 379.2) = 14 29 39.72 33 53 36.9
  Extent = 1.7 (1.5-1.8)", rotation angle = 0
  Source counts = 341.4 +/- 19.1
  Background counts = 24.1
  Rate = 0.02 +/- 0.0008
[Sat Oct 22 05:50:18 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:50:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:50:18 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:50:18 2011] Source does appear to be extended
[Sat Oct 22 05:50:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:51:33 2011] Not overwriting source region fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.reg
[Sat Oct 22 05:51:33 2011] Extracting stamp from image fullrun_ccd2_acisf10450_pi14-548_cl_sm2.00.img.gz, (729, 304) - (880, 455)
[Sat Oct 22 05:51:33 2011] Writing fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11.gif
[Sat Oct 22 05:51:34 2011] ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.evt and ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Oct 22 05:51:34 2011] Size of ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.evt.gz[events] = 363 counts
[Sat Oct 22 05:51:34 2011] Mean chipx,y = (228.07, 333.54)
[Sat Oct 22 05:51:34 2011] Mean tdetx,y = (3394.54, 3857.93)
[Sat Oct 22 05:51:34 2011] chipx,y range = (204.00-252.00, 308.00-361.00)
[Sat Oct 22 05:51:34 2011] Size of ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 44 counts
[Sat Oct 22 05:51:34 2011] ../../acisf10450/products/images/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.img and ../../acisf10450/products/images/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Oct 22 05:51:34 2011] ../../acisf10450/products/spectra/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.pi and ../../acisf10450/products/spectra/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Oct 22 05:51:37 2011] ../../acisf10450/products/lightcurves/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.lc and ../../acisf10450/products/lightcurves/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Oct 22 05:52:23 2011] Keeping rmf generated by specextract
[Sat Oct 22 05:52:23 2011] 174.012
[Sat Oct 22 05:53:27 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:53:27 2011] Error reading totcts from fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Oct 22 05:53:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:27 2011] Using photon index=1.80, rate=0.015, arf fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11.arf
[Sat Oct 22 05:53:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:27 2011] Updating source flux to 2e-13
[Sat Oct 22 05:53:44 2011] Reading fit data from acisf10450/analysis//spectral/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_pl.csv
[Sat Oct 22 05:53:44 2011] Spectral fit parameter nH value = 1.42439e+22
[Sat Oct 22 05:53:44 2011] Spectral fit parameter PhoIndex value = 1.60881
[Sat Oct 22 05:53:44 2011] Failed to get F(0.3-8.0) from acisf10450/analysis//spectral/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 05:53:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:44 2011] Using Nh = 1.4e+22, photon index=1.61, rate=0.015, arf fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src11.arf
[Sat Oct 22 05:53:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:44 2011] Updating source flux to 2.9e-13