[Sat Oct 22 05:48:49 2011] Detection parameters:
  Position = (1368.5, 666.9) = 14 29 17.43 33 55 58.8
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 23.4 +/- 4.9
  Background counts = 0.6
  Rate = 0.001 +/- 0.0002

[Sat Oct 22 05:48:50 2011] Off-axis axis estimate = 1.15'
[Sat Oct 22 05:49:41 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:49:41 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 22 05:49:41 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Sat Oct 22 05:49:41 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct 22 05:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6.csv
[Sat Oct 22 05:49:41 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct 22 05:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6.csv
[Sat Oct 22 05:49:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10450_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:49:42 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct 22 05:49:42 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct 22 05:49:42 2011] Fit fullrun_ccd2_acisf10450_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Oct 22 05:49:50 2011] Spatial fit model total counts = 29.598900, observed total counts = 27.000000
[Sat Oct 22 05:49:50 2011] Offset between fit and detection position for source 1 = 0.713859 pixels
[Sat Oct 22 05:49:50 2011] 29.876890 total counts/ 9.048090 bgd. counts: snr = 6.924458
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.713859 pixels
  Position = (1369.0, 667.4) = 14 29 17.43 33 55 58.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.8 +/- 5.5
  Background counts = 9.0
  Rate = 0.0009 +/- 0.0002
[Sat Oct 22 05:49:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:49:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:49:50 2011] Source does appear to be extended
[Sat Oct 22 05:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:50:09 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Sat Oct 22 05:50:09 2011] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.994
[Sat Oct 22 05:50:09 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.36"
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6.ximg exists
[Sat Oct 22 05:50:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6.csv
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Oct 22 05:50:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6.csv
[Sat Oct 22 05:50:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10450_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Oct 22 05:50:10 2011] fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Oct 22 05:50:10 2011] Fit fullrun_ccd2_acisf10450_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Oct 22 05:50:18 2011] Spatial fit model total counts = 29.191200, observed total counts = 27.000000
[Sat Oct 22 05:50:18 2011] Offset between fit and detection position for source 1 = 0.003926 pixels
[Sat Oct 22 05:50:18 2011] 29.378560 total counts/ 8.403560 bgd. counts: snr = 7.235529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003926 pixels
  Position = (1369.0, 667.4) = 14 29 17.43 33 55 58.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 21.0 +/- 5.4
  Background counts = 8.4
  Rate = 0.0009 +/- 0.0002
[Sat Oct 22 05:50:18 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:50:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:50:18 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:50:18 2011] Source does appear to be extended
[Sat Oct 22 05:50:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:51:33 2011] Not overwriting source region fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 05:51:33 2011] Extracting stamp from image fullrun_ccd2_acisf10450_pi14-548_cl_sm2.00.img.gz, (1353, 651) - (1385, 684)
[Sat Oct 22 05:51:33 2011] Writing fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 05:51:49 2011] ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.evt and ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 05:51:49 2011] Size of ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.evt.gz[events] = 22 counts
[Sat Oct 22 05:51:49 2011] Mean chipx,y = (13.41, 922.86)
[Sat Oct 22 05:51:49 2011] Mean tdetx,y = (3983.86, 4072.59)
[Sat Oct 22 05:51:49 2011] chipx,y range = (3.00-21.00, 912.00-945.00)
[Sat Oct 22 05:51:49 2011] Size of ../../acisf10450/products/events/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Sat Oct 22 05:51:49 2011] ../../acisf10450/products/images/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.img and ../../acisf10450/products/images/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 05:51:49 2011] ../../acisf10450/products/spectra/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.pi and ../../acisf10450/products/spectra/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 05:51:49 2011] Not generating rmf since there are only 20 counts
[Sat Oct 22 05:51:52 2011] ../../acisf10450/products/lightcurves/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.lc and ../../acisf10450/products/lightcurves/fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 05:52:23 2011] 114.224
[Sat Oct 22 05:53:27 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:53:27 2011] Error reading totcts from fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 05:53:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:27 2011] Using photon index=1.80, rate=0.000923, arf fullrun_ccd2_acisf10450_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 05:53:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:27 2011] Updating source flux to 1.9e-14
[Sat Oct 22 05:53:36 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting