[Sat Oct 22 05:48:46 2011] Detection parameters:
  Position = (939.2, 910.9) = 14 28 36.27 33 58 18.6
  Extent = 2.8" x 2.0", rotation angle = 151 degrees
  Source counts = 79.9 +/- 9.6
  Background counts = 12.1
  Rate = 0.004 +/- 0.0004

[Sat Oct 22 05:48:47 2011] Off-axis axis estimate = 8.39'
[Sat Oct 22 05:49:39 2011] Using EEF radius (= 3.11 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:49:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:49:39 2011] Initial guess for spatial extent in simple fitting = 3.11"
[Sat Oct 22 05:49:39 2011] source mask rpix=6.3, npix_max = 186, mask sum = 194, frac = 1.043
[Sat Oct 22 05:49:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.11"
[Sat Oct 22 05:49:40 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 05:49:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:40 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 05:49:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 05:49:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10450_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:49:40 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 05:49:41 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:49:41 2011] Fit fullrun_ccd1_acisf10450_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:49:49 2011] Spatial fit model total counts = 97.307300, observed total counts = 97.000000
[Sat Oct 22 05:49:49 2011] Offset between fit and detection position for source 1 = 1.161584 pixels
[Sat Oct 22 05:49:49 2011] 96.966800 total counts/ 12.888800 bgd. counts: snr = 23.419420
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.161584 pixels
  Position = (940.1, 911.7) = 14 28 36.25 33 58 18.7
  Extent = 2.7 (2.3-3.2)", rotation angle = 0
  Source counts = 84.1 +/- 9.8
  Background counts = 12.9
  Rate = 0.004 +/- 0.0004
[Sat Oct 22 05:49:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:49:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:49:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:49:49 2011] Source does appear to be extended
[Sat Oct 22 05:49:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 05:50:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 05:50:08 2011] Initial guess for spatial extent in simple fitting = 2.74"
[Sat Oct 22 05:50:08 2011] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.978
[Sat Oct 22 05:50:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.74"
[Sat Oct 22 05:50:09 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 05:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:09 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 05:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 05:50:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10450_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 05:50:09 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 05:50:09 2011] fullrun_ccd1_acisf10450_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 05:50:09 2011] Fit fullrun_ccd1_acisf10450_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 05:50:16 2011] Spatial fit model total counts = 95.994300, observed total counts = 96.000000
[Sat Oct 22 05:50:16 2011] Offset between fit and detection position for source 1 = 0.054424 pixels
[Sat Oct 22 05:50:16 2011] 95.598700 total counts/ 13.908000 bgd. counts: snr = 21.904850
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.054424 pixels
  Position = (940.1, 911.7) = 14 28 36.25 33 58 18.7
  Extent = 2.7 (2.2-3.1)", rotation angle = 0
  Source counts = 81.7 +/- 9.8
  Background counts = 13.9
  Rate = 0.004 +/- 0.0004
[Sat Oct 22 05:50:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 05:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 05:50:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 05:50:16 2011] Source does appear to be extended
[Sat Oct 22 05:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 05:50:49 2011] Not overwriting source region fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 05:50:49 2011] Extracting stamp from image fullrun_ccd1_acisf10450_pi14-548_cl_sm2.00.img.gz, (818, 790) - (1062, 1034)
[Sat Oct 22 05:50:49 2011] Writing fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 05:50:50 2011] ../../acisf10450/products/events/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.evt and ../../acisf10450/products/events/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 05:50:50 2011] Size of ../../acisf10450/products/events/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.evt.gz[events] = 91 counts
[Sat Oct 22 05:50:50 2011] Mean chipx,y = (549.68, 228.62)
[Sat Oct 22 05:50:50 2011] Mean tdetx,y = (4903.38, 4656.68)
[Sat Oct 22 05:50:50 2011] chipx,y range = (526.00-587.00, 205.00-261.00)
[Sat Oct 22 05:50:50 2011] Size of ../../acisf10450/products/events/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 143 counts
[Sat Oct 22 05:50:50 2011] ../../acisf10450/products/images/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.img and ../../acisf10450/products/images/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 05:50:50 2011] ../../acisf10450/products/spectra/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.pi and ../../acisf10450/products/spectra/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 05:50:50 2011] Not generating rmf since there are only 81 counts
[Sat Oct 22 05:50:53 2011] ../../acisf10450/products/lightcurves/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.lc and ../../acisf10450/products/lightcurves/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 05:51:33 2011] 168.526
[Sat Oct 22 05:53:26 2011] Updating aperture counts using extracted products
[Sat Oct 22 05:53:26 2011] Error reading totcts from fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 05:53:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 05:53:26 2011] Using photon index=1.80, rate=0.00359, arf fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 05:53:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 05:53:26 2011] Updating source flux to 5.1e-14
[Sat Oct 22 05:53:35 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 05:53:36 2011] acisf10450/analysis//spectral/fullrun_ccd1_acisf10450_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete