[Tue Nov  1 07:58:58 2011] Detection parameters:
  Position = (728.5, 818.7) = 15 21 47.58 30 39 11.0
  Extent = 0.6" x 0.5", rotation angle = 22 degrees
  Source counts = 223.8 +/- 15.1
  Background counts = 3.2
  Rate = 0.007 +/- 0.0005

[Tue Nov  1 07:58:59 2011] Off-axis axis estimate = 2.98'
[Tue Nov  1 07:59:57 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 07:59:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 07:59:57 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Nov  1 07:59:57 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.805
[Tue Nov  1 07:59:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.58"
[Tue Nov  1 07:59:57 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1.ximg exists
[Tue Nov  1 07:59:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 07:59:57 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Nov  1 07:59:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 07:59:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10449_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 07:59:57 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov  1 07:59:57 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov  1 07:59:57 2011] Fit fullrun_ccd0_acisf10449_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov  1 08:00:04 2011] Spatial fit model total counts = 232.160000, observed total counts = 232.000000
[Tue Nov  1 08:00:04 2011] Offset between fit and detection position for source 1 = 0.731895 pixels
[Tue Nov  1 08:00:04 2011] 232.741400 total counts/ 14.276400 bgd. counts: snr = 57.819258
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.731895 pixels
  Position = (728.9, 819.3) = 15 21 47.58 30 39 11.1
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 218.5 +/- 15.3
  Background counts = 14.3
  Rate = 0.007 +/- 0.0005
[Tue Nov  1 08:00:04 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 08:00:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 08:00:04 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 08:00:04 2011] Source does appear to be extended
[Tue Nov  1 08:00:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 08:00:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 08:00:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 08:00:21 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Nov  1 08:00:21 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.249
[Tue Nov  1 08:00:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.63"
[Tue Nov  1 08:00:22 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1.ximg exists
[Tue Nov  1 08:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 08:00:22 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Nov  1 08:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 08:00:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10449_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 08:00:22 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov  1 08:00:22 2011] fullrun_ccd0_acisf10449_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov  1 08:00:22 2011] Fit fullrun_ccd0_acisf10449_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov  1 08:00:32 2011] Spatial fit model total counts = 232.899000, observed total counts = 233.000000
[Tue Nov  1 08:00:32 2011] Offset between fit and detection position for source 1 = 0.004455 pixels
[Tue Nov  1 08:00:32 2011] 233.225800 total counts/ 14.926800 bgd. counts: snr = 56.502594
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004455 pixels
  Position = (728.9, 819.3) = 15 21 47.58 30 39 11.1
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 218.3 +/- 15.3
  Background counts = 14.9
  Rate = 0.007 +/- 0.0005
[Tue Nov  1 08:00:32 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 08:00:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 08:00:32 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 08:00:32 2011] Source does appear to be extended
[Tue Nov  1 08:00:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 08:00:49 2011] Not overwriting source region fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.reg
[Tue Nov  1 08:00:49 2011] Extracting stamp from image fullrun_ccd0_acisf10449_pi14-548_cl_sm2.00.img.gz, (700, 790) - (758, 849)
[Tue Nov  1 08:00:49 2011] Writing fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1.gif
[Tue Nov  1 08:00:51 2011] ../../acisf10449/products/events/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.evt and ../../acisf10449/products/events/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Nov  1 08:00:51 2011] Size of ../../acisf10449/products/events/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.evt.gz[events] = 223 counts
[Tue Nov  1 08:00:51 2011] Mean chipx,y = (794.63, 679.40)
[Tue Nov  1 08:00:51 2011] Mean tdetx,y = (3740.40, 4337.37)
[Tue Nov  1 08:00:51 2011] chipx,y range = (774.00-813.00, 661.00-699.00)
[Tue Nov  1 08:00:51 2011] Size of ../../acisf10449/products/events/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 25 counts
[Tue Nov  1 08:00:51 2011] ../../acisf10449/products/images/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.img and ../../acisf10449/products/images/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Nov  1 08:00:51 2011] ../../acisf10449/products/spectra/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.pi and ../../acisf10449/products/spectra/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Nov  1 08:00:54 2011] ../../acisf10449/products/lightcurves/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.lc and ../../acisf10449/products/lightcurves/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Nov  1 08:01:48 2011] Keeping rmf generated by specextract
[Tue Nov  1 08:01:48 2011] 193.036
[Tue Nov  1 08:03:30 2011] Updating aperture counts using extracted products
[Tue Nov  1 08:03:30 2011] Error reading totcts from fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Nov  1 08:03:30 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 08:03:30 2011] Using photon index=1.80, rate=0.00696, arf fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1.arf
[Tue Nov  1 08:03:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 08:03:30 2011] Updating source flux to 8.5e-14
[Tue Nov  1 08:03:43 2011] Reading fit data from acisf10449/analysis//spectral/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_pl.csv
[Tue Nov  1 08:03:43 2011] Spectral fit parameter nH value = 1.59231e+21
[Tue Nov  1 08:03:43 2011] Spectral fit parameter PhoIndex value = 1.3529
[Tue Nov  1 08:03:43 2011] Failed to get F(0.3-8.0) from acisf10449/analysis//spectral/fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov  1 08:03:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 08:03:43 2011] Using Nh = 1.6e+21, photon index=1.35, rate=0.00696, arf fullrun_ccd0_acisf10449_pi14-548_pass1_cl_src1.arf
[Tue Nov  1 08:03:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 08:03:43 2011] Updating source flux to 9.8e-14