[Fri Sep 23 19:47:04 2011] Detection parameters:
  Position = (745.7, 878.2) = 4 3 50.26 -27 4 21.1
  Extent = 1.1" x 0.7", rotation angle = 31 degrees
  Source counts = 34.1 +/- 6.0
  Background counts = 1.9
  Rate = 0.001 +/- 0.0003

[Fri Sep 23 19:47:06 2011] Off-axis axis estimate = 4.81'
[Fri Sep 23 19:47:59 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:47:59 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Sep 23 19:47:59 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.993
[Fri Sep 23 19:47:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.11"
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 19:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 19:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 19:47:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 19:47:59 2011] Fit fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 19:48:07 2011] Spatial fit model total counts = 41.320300, observed total counts = 41.000000
[Fri Sep 23 19:48:07 2011] Offset between fit and detection position for source 2 = 0.968765 pixels
[Fri Sep 23 19:48:07 2011] 41.569600 total counts/ 13.937700 bgd. counts: snr = 7.401422
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.968765 pixels
  Position = (746.7, 878.4) = 4 3 50.24 -27 4 21.2
  Extent = 0.9 (0.7-1.4)", rotation angle = 0
  Source counts = 27.6 +/- 6.4
  Background counts = 13.9
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 19:48:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:48:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:48:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:48:07 2011] Source does appear to be extended
[Fri Sep 23 19:48:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:48:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:48:26 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Fri Sep 23 19:48:26 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.159
[Fri Sep 23 19:48:26 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.90"
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 23 19:48:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 23 19:48:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 19:48:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 19:48:28 2011] Fit fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 19:48:34 2011] Spatial fit model total counts = 41.256100, observed total counts = 41.000000
[Fri Sep 23 19:48:34 2011] Offset between fit and detection position for source 2 = 0.108706 pixels
[Fri Sep 23 19:48:34 2011] 41.393000 total counts/ 13.938500 bgd. counts: snr = 7.353693
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.108706 pixels
  Position = (746.6, 878.5) = 4 3 50.24 -27 4 21.2
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 27.5 +/- 6.4
  Background counts = 13.9
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 19:48:34 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:48:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:48:34 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:48:34 2011] Source does appear to be extended
[Fri Sep 23 19:48:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:49:50 2011] Not overwriting source region fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 19:49:50 2011] Extracting stamp from image fullrun_ccd2_acisf10448_pi14-548_cl_sm2.00.img.gz, (704, 836) - (789, 921)
[Fri Sep 23 19:49:50 2011] Writing fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 19:49:58 2011] ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.evt and ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 19:49:58 2011] Size of ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.evt.gz[events] = 38 counts
[Fri Sep 23 19:49:58 2011] Mean chipx,y = (223.92, 451.79)
[Fri Sep 23 19:49:58 2011] Mean tdetx,y = (3512.79, 3862.08)
[Fri Sep 23 19:49:58 2011] chipx,y range = (206.00-242.00, 433.00-470.00)
[Fri Sep 23 19:49:58 2011] Size of ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 26 counts
[Fri Sep 23 19:49:58 2011] ../../acisf10448/products/images/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.img and ../../acisf10448/products/images/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 19:49:58 2011] ../../acisf10448/products/spectra/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.pi and ../../acisf10448/products/spectra/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 19:49:58 2011] Not generating rmf since there are only 27 counts
[Fri Sep 23 19:50:01 2011] ../../acisf10448/products/lightcurves/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.lc and ../../acisf10448/products/lightcurves/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 19:51:21 2011] 181.692
[Fri Sep 23 19:52:51 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:52:51 2011] Error reading totcts from fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 19:52:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 19:52:52 2011] Using photon index=1.80, rate=0.00121, arf fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 19:52:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 19:52:52 2011] Updating source flux to 1.5e-14
[Fri Sep 23 19:52:58 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 19:52:59 2011] acisf10448/analysis//spectral/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete