[Fri Sep 23 19:47:05 2011] Detection parameters:
  Position = (430.7, 500.3) = 4 4 1.86 -27 7 27.1
  Extent = 0.5" x 0.5", rotation angle = 109 degrees
  Source counts = 70.6 +/- 8.5
  Background counts = 1.4
  Rate = 0.003 +/- 0.0004

[Fri Sep 23 19:47:06 2011] Off-axis axis estimate = 4.59'
[Fri Sep 23 19:47:59 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:47:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 19:47:59 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Fri Sep 23 19:47:59 2011] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.750
[Fri Sep 23 19:47:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.02"
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 19:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 19:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 19:47:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10448_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 19:47:59 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 19:47:59 2011] Fit fullrun_ccd2_acisf10448_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 19:48:07 2011] Spatial fit model total counts = 82.425600, observed total counts = 82.000000
[Fri Sep 23 19:48:07 2011] Offset between fit and detection position for source 14 = 0.555721 pixels
[Fri Sep 23 19:48:07 2011] 82.737750 total counts/ 6.572550 bgd. counts: snr = 29.709110
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.555721 pixels
  Position = (431.2, 500.6) = 4 4 1.86 -27 7 27.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 76.2 +/- 9.1
  Background counts = 6.6
  Rate = 0.003 +/- 0.0004
[Fri Sep 23 19:48:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:48:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:48:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:48:07 2011] Source does appear to be extended
[Fri Sep 23 19:48:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:48:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:48:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 19:48:26 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Sep 23 19:48:26 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Fri Sep 23 19:48:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.91"
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 19:48:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 19:48:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 19:48:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10448_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 19:48:28 2011] fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 19:48:28 2011] Fit fullrun_ccd2_acisf10448_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 19:48:34 2011] Spatial fit model total counts = 80.145900, observed total counts = 81.000000
[Fri Sep 23 19:48:34 2011] Offset between fit and detection position for source 14 = 0.036425 pixels
[Fri Sep 23 19:48:34 2011] 80.928510 total counts/ 4.637810 bgd. counts: snr = 35.425429
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.036425 pixels
  Position = (431.2, 500.5) = 4 4 1.86 -27 7 27.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 76.3 +/- 9.0
  Background counts = 4.6
  Rate = 0.003 +/- 0.0004
[Fri Sep 23 19:48:34 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:48:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:48:34 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:48:34 2011] Source does appear to be extended
[Fri Sep 23 19:48:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:49:50 2011] Not overwriting source region fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.reg
[Fri Sep 23 19:49:50 2011] Extracting stamp from image fullrun_ccd2_acisf10448_pi14-548_cl_sm2.00.img.gz, (389, 459) - (473, 542)
[Fri Sep 23 19:49:50 2011] Writing fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14.gif
[Fri Sep 23 19:49:52 2011] ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.evt and ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Sep 23 19:49:52 2011] Size of ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.evt.gz[events] = 80 counts
[Fri Sep 23 19:49:52 2011] Mean chipx,y = (669.80, 661.16)
[Fri Sep 23 19:49:52 2011] Mean tdetx,y = (3722.16, 3416.20)
[Fri Sep 23 19:49:52 2011] chipx,y range = (650.00-688.00, 643.00-682.00)
[Fri Sep 23 19:49:52 2011] Size of ../../acisf10448/products/events/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 12 counts
[Fri Sep 23 19:49:52 2011] ../../acisf10448/products/images/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.img and ../../acisf10448/products/images/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Sep 23 19:49:52 2011] ../../acisf10448/products/spectra/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.pi and ../../acisf10448/products/spectra/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Sep 23 19:49:52 2011] Not generating rmf since there are only 76 counts
[Fri Sep 23 19:49:55 2011] ../../acisf10448/products/lightcurves/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.lc and ../../acisf10448/products/lightcurves/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Sep 23 19:51:21 2011] 178.566
[Fri Sep 23 19:52:51 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:52:51 2011] Error reading totcts from fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Sep 23 19:52:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 19:52:52 2011] Using photon index=1.80, rate=0.00336, arf fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14.arf
[Fri Sep 23 19:52:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 19:52:52 2011] Updating source flux to 4.4e-14
[Fri Sep 23 19:52:58 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 19:52:59 2011] acisf10448/analysis//spectral/fullrun_ccd2_acisf10448_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete