[Fri Sep 23 19:47:00 2011] Detection parameters:
  Position = (604.0, 1104.6) = 4 3 46.05 -26 54 11.7
  Extent = 2.4" x 2.1", rotation angle = 107 degrees
  Source counts = 14.0 +/- 4.5
  Background counts = 6.0
  Rate = 0.0006 +/- 0.0002

[Fri Sep 23 19:47:01 2011] Off-axis axis estimate = 10.79'
[Fri Sep 23 19:47:55 2011] Using EEF radius (= 5.17 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:47:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 19:47:55 2011] Initial guess for spatial extent in simple fitting = 5.17"
[Fri Sep 23 19:47:55 2011] source mask rpix=10.5, npix_max = 485, mask sum = 462, frac = 0.952
[Fri Sep 23 19:47:55 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 5.17"
[Fri Sep 23 19:47:56 2011] fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 23 19:47:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5.csv
[Fri Sep 23 19:47:56 2011] fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 23 19:47:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5.csv
[Fri Sep 23 19:47:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10448_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:47:57 2011] fullrun_ccd0_acisf10448_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 23 19:47:57 2011] fullrun_ccd0_acisf10448_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 23 19:47:57 2011] Fit fullrun_ccd0_acisf10448_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 23 19:48:05 2011] Spatial fit model total counts = 43.680300, observed total counts = 41.000000
[Fri Sep 23 19:48:05 2011] Offset between fit and detection position for source 5 = 4.745735 pixels
[Fri Sep 23 19:48:05 2011] 43.939700 total counts/ 33.907700 bgd. counts: snr = 1.722814
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 4.745735 pixels
  Position = (603.1, 1109.3) = 4 3 46.10 -26 54 9.7
  Extent = 1.3" x 1.3", rotation angle = 0
  Source counts = 10.0 +/- 6.6
  Background counts = 33.9
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability