[Fri Oct  7 21:45:14 2011] Detection parameters:
  Position = (726.3, 1035.2) = 12 18 27.21 40 24 13.4
  Extent = 1.9" x 1.3", rotation angle = 112 degrees
  Source counts = 161.5 +/- 14.1
  Background counts = 38.5
  Rate = 0.009 +/- 0.0007

[Fri Oct  7 21:45:14 2011] Off-axis axis estimate = 10.22'
[Fri Oct  7 21:46:07 2011] Using EEF radius (= 4.63 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:46:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 21:46:07 2011] Initial guess for spatial extent in simple fitting = 4.63"
[Fri Oct  7 21:46:07 2011] source mask rpix=9.4, npix_max = 392, mask sum = 399, frac = 1.016
[Fri Oct  7 21:46:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.63"
[Fri Oct  7 21:46:10 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 21:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 21:46:10 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 21:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 21:46:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10447_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:46:13 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 21:46:13 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 21:46:13 2011] Fit fullrun_ccd0_acisf10447_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 21:46:20 2011] Spatial fit model total counts = 255.073000, observed total counts = 257.000000
[Fri Oct  7 21:46:20 2011] Offset between fit and detection position for source 1 = 2.407900 pixels
[Fri Oct  7 21:46:20 2011] 254.975500 total counts/ 36.211500 bgd. counts: snr = 36.354033
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.407900 pixels
  Position = (728.7, 1035.3) = 12 18 27.13 40 24 13.2
  Extent = 4.9 (4.4-5.5)", rotation angle = 0
  Source counts = 218.8 +/- 16.0
  Background counts = 36.2
  Rate = 0.01 +/- 0.0008
[Fri Oct  7 21:46:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:46:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:46:20 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:46:20 2011] Source does appear to be extended
[Fri Oct  7 21:46:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:46:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:46:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 21:46:43 2011] Initial guess for spatial extent in simple fitting = 4.91"
[Fri Oct  7 21:46:43 2011] source mask rpix=10.0, npix_max = 438, mask sum = 432, frac = 0.984
[Fri Oct  7 21:46:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Fri Oct  7 21:46:43 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 21:46:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 21:46:43 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 21:46:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 21:46:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10447_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:46:44 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 21:46:44 2011] fullrun_ccd0_acisf10447_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 21:46:44 2011] Fit fullrun_ccd0_acisf10447_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 21:47:04 2011] Spatial fit model total counts = 260.299000, observed total counts = 262.000000
[Fri Oct  7 21:47:04 2011] Offset between fit and detection position for source 1 = 0.104605 pixels
[Fri Oct  7 21:47:04 2011] 260.050900 total counts/ 41.649900 bgd. counts: snr = 33.841347
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104605 pixels
  Position = (728.8, 1035.3) = 12 18 27.12 40 24 13.2
  Extent = 4.9 (4.4-5.5)", rotation angle = 0
  Source counts = 218.4 +/- 16.1
  Background counts = 41.6
  Rate = 0.01 +/- 0.0009
[Fri Oct  7 21:47:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:47:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:47:04 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:47:04 2011] Source does appear to be extended
[Fri Oct  7 21:47:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:47:26 2011] Not overwriting source region fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 21:47:26 2011] Extracting stamp from image fullrun_ccd0_acisf10447_pi14-548_cl_sm2.00.img.gz, (504, 811) - (953, 1260)
[Fri Oct  7 21:47:26 2011] Writing fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 21:47:27 2011] ../../acisf10447/products/events/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.evt and ../../acisf10447/products/events/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 21:47:27 2011] Size of ../../acisf10447/products/events/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.evt.gz[events] = 254 counts
[Fri Oct  7 21:47:27 2011] Mean chipx,y = (289.92, 300.50)
[Fri Oct  7 21:47:27 2011] Mean tdetx,y = (3361.50, 4842.08)
[Fri Oct  7 21:47:27 2011] chipx,y range = (246.00-335.00, 255.00-344.00)
[Fri Oct  7 21:47:27 2011] Size of ../../acisf10447/products/events/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 325 counts
[Fri Oct  7 21:47:27 2011] ../../acisf10447/products/images/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.img and ../../acisf10447/products/images/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 21:47:27 2011] ../../acisf10447/products/spectra/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.pi and ../../acisf10447/products/spectra/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 21:47:30 2011] ../../acisf10447/products/lightcurves/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.lc and ../../acisf10447/products/lightcurves/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 21:47:50 2011] Keeping rmf generated by specextract
[Fri Oct  7 21:47:50 2011] 148.481
[Fri Oct  7 21:50:19 2011] Updating aperture counts using extracted products
[Fri Oct  7 21:50:19 2011] Error reading totcts from fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 21:50:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 21:50:19 2011] Using photon index=1.80, rate=0.0116, arf fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 21:50:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 21:50:19 2011] Updating source flux to 1.8e-13
[Fri Oct  7 21:50:25 2011] Reading fit data from acisf10447/analysis//spectral/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 21:50:25 2011] Spectral fit parameter nH value = 1.53582e+14
[Fri Oct  7 21:50:25 2011] Spectral fit parameter PhoIndex value = 1.37471
[Fri Oct  7 21:50:25 2011] Failed to get F(0.3-8.0) from acisf10447/analysis//spectral/fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 21:50:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 21:50:25 2011] Using Nh = 1.5e+14, photon index=1.37, rate=0.0116, arf fullrun_ccd0_acisf10447_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 21:50:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 21:50:25 2011] Updating source flux to 2.1e-13