[Wed Oct 19 09:37:35 2011] Detection parameters:
  Position = (456.6, 1226.2) = 9 13 52.72 40 58 29.5
  Extent = 0.5" x 0.5", rotation angle = 171 degrees
  Source counts = 108.0 +/- 10.5
  Background counts = 3.0
  Rate = 0.001 +/- 0.0001

[Wed Oct 19 09:37:37 2011] Off-axis axis estimate = 2.25'
[Wed Oct 19 09:38:45 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:38:45 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Oct 19 09:38:45 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.098
[Wed Oct 19 09:38:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.46"
[Wed Oct 19 09:38:46 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct 19 09:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 09:38:46 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct 19 09:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 09:38:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10445_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:38:47 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct 19 09:38:47 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct 19 09:38:47 2011] Fit fullrun_ccd3_acisf10445_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct 19 09:39:04 2011] Spatial fit model total counts = 118.000000, observed total counts = 118.000000
[Wed Oct 19 09:39:04 2011] Offset between fit and detection position for source 1 = 0.765247 pixels
[Wed Oct 19 09:39:04 2011] 118.423800 total counts/ 12.272800 bgd. counts: snr = 30.300672
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.765247 pixels
  Position = (457.1, 1226.8) = 9 13 52.72 40 58 29.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 106.2 +/- 10.9
  Background counts = 12.3
  Rate = 0.001 +/- 0.0001
[Wed Oct 19 09:39:04 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:39:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:39:04 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:39:04 2011] Source does appear to be extended
[Wed Oct 19 09:39:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:39:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:39:31 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Oct 19 09:39:31 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.967
[Wed Oct 19 09:39:31 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.50"
[Wed Oct 19 09:39:32 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 19 09:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 09:39:32 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 19 09:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 09:39:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10445_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:39:32 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 19 09:39:32 2011] fullrun_ccd3_acisf10445_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 19 09:39:32 2011] Fit fullrun_ccd3_acisf10445_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 19 09:39:46 2011] Spatial fit model total counts = 118.000000, observed total counts = 118.000000
[Wed Oct 19 09:39:46 2011] Offset between fit and detection position for source 1 = 0.003587 pixels
[Wed Oct 19 09:39:46 2011] 118.010400 total counts/ 11.714400 bgd. counts: snr = 31.056814
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003587 pixels
  Position = (457.1, 1226.8) = 9 13 52.72 40 58 29.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 106.3 +/- 10.9
  Background counts = 11.7
  Rate = 0.001 +/- 0.0001
[Wed Oct 19 09:39:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:39:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:39:46 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:39:46 2011] Source does appear to be extended
[Wed Oct 19 09:39:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:43:41 2011] Not overwriting source region fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 09:43:41 2011] Extracting stamp from image fullrun_ccd3_acisf10445_pi14-548_cl_sm2.00.img.gz, (434, 1204) - (480, 1250)
[Wed Oct 19 09:43:41 2011] Writing fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 09:43:45 2011] ../../acisf10445/products/events/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.evt and ../../acisf10445/products/events/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 09:43:45 2011] Size of ../../acisf10445/products/events/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.evt.gz[events] = 108 counts
[Wed Oct 19 09:43:45 2011] Mean chipx,y = (946.37, 894.02)
[Wed Oct 19 09:43:45 2011] Mean tdetx,y = (4237.98, 4007.37)
[Wed Oct 19 09:43:45 2011] chipx,y range = (930.00-965.00, 875.00-912.00)
[Wed Oct 19 09:43:45 2011] Size of ../../acisf10445/products/events/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 20 counts
[Wed Oct 19 09:43:45 2011] ../../acisf10445/products/images/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.img and ../../acisf10445/products/images/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 09:43:45 2011] ../../acisf10445/products/spectra/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.pi and ../../acisf10445/products/spectra/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 09:43:47 2011] ../../acisf10445/products/lightcurves/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.lc and ../../acisf10445/products/lightcurves/fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 09:44:12 2011] Keeping rmf generated by specextract
[Wed Oct 19 09:44:12 2011] 202.915
[Wed Oct 19 09:44:21 2011] Updating aperture counts using extracted products
[Wed Oct 19 09:44:21 2011] Error reading totcts from fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 09:44:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:44:21 2011] Using photon index=1.80, rate=0.0014, arf fullrun_ccd3_acisf10445_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 09:44:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:44:21 2011] Updating source flux to 1.6e-14