[Wed Oct 19 09:37:29 2011] Detection parameters:
  Position = (426.0, 498.7) = 9 14 35.12 40 56 16.2
  Extent = 4.0" x 3.3", rotation angle = 131 degrees
  Source counts = 292.4 +/- 19.4
  Background counts = 83.6
  Rate = 0.004 +/- 0.0003

[Wed Oct 19 09:37:31 2011] Off-axis axis estimate = 10.51'
[Wed Oct 19 09:38:43 2011] Using EEF radius (= 4.90 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:38:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 09:38:43 2011] Initial guess for spatial extent in simple fitting = 4.90"
[Wed Oct 19 09:38:43 2011] source mask rpix=10.0, npix_max = 437, mask sum = 441, frac = 1.007
[Wed Oct 19 09:38:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.90"
[Wed Oct 19 09:38:43 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 09:38:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 09:38:43 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 09:38:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 09:38:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10445_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:38:44 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 09:38:44 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 09:38:44 2011] Fit fullrun_ccd1_acisf10445_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 09:38:58 2011] Spatial fit model total counts = 475.427000, observed total counts = 474.000000
[Wed Oct 19 09:38:58 2011] Offset between fit and detection position for source 1 = 0.055086 pixels
[Wed Oct 19 09:38:58 2011] 476.044000 total counts/ 168.714000 bgd. counts: snr = 23.660798
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055086 pixels
  Position = (426.1, 498.8) = 9 14 35.14 40 56 16.0
  Extent = 4.2 (3.8-4.6)", rotation angle = 0
  Source counts = 307.3 +/- 21.8
  Background counts = 168.7
  Rate = 0.004 +/- 0.0003
[Wed Oct 19 09:38:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:38:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:38:58 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:38:58 2011] Source does appear to be extended
[Wed Oct 19 09:38:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:39:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:39:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 09:39:29 2011] Initial guess for spatial extent in simple fitting = 4.20"
[Wed Oct 19 09:39:29 2011] source mask rpix=8.5, npix_max = 326, mask sum = 324, frac = 0.993
[Wed Oct 19 09:39:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.20"
[Wed Oct 19 09:39:29 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 09:39:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 09:39:29 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 09:39:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 09:39:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10445_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:39:30 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 09:39:30 2011] fullrun_ccd1_acisf10445_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 09:39:30 2011] Fit fullrun_ccd1_acisf10445_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 09:39:41 2011] Spatial fit model total counts = 434.782000, observed total counts = 433.000000
[Wed Oct 19 09:39:41 2011] Offset between fit and detection position for source 1 = 0.036816 pixels
[Wed Oct 19 09:39:41 2011] 435.136000 total counts/ 129.847000 bgd. counts: snr = 26.791387
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036816 pixels
  Position = (426.1, 498.8) = 9 14 35.14 40 56 15.9
  Extent = 4.2 (3.8-4.6)", rotation angle = 0
  Source counts = 305.3 +/- 20.9
  Background counts = 129.8
  Rate = 0.004 +/- 0.0003
[Wed Oct 19 09:39:41 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:39:41 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:39:41 2011] Source does appear to be extended
[Wed Oct 19 09:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:40:49 2011] Not overwriting source region fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 09:40:49 2011] Extracting stamp from image fullrun_ccd1_acisf10445_pi14-548_cl_sm2.00.img.gz, (235, 308) - (617, 690)
[Wed Oct 19 09:40:49 2011] Writing fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 09:40:50 2011] ../../acisf10445/products/events/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.evt and ../../acisf10445/products/events/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 09:40:50 2011] Size of ../../acisf10445/products/events/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.evt.gz[events] = 408 counts
[Wed Oct 19 09:40:50 2011] Mean chipx,y = (664.09, 222.06)
[Wed Oct 19 09:40:50 2011] Mean tdetx,y = (4909.94, 4771.09)
[Wed Oct 19 09:40:50 2011] chipx,y range = (619.00-710.00, 177.00-266.00)
[Wed Oct 19 09:40:50 2011] Size of ../../acisf10445/products/events/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 932 counts
[Wed Oct 19 09:40:50 2011] ../../acisf10445/products/images/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.img and ../../acisf10445/products/images/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 09:40:50 2011] ../../acisf10445/products/spectra/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.pi and ../../acisf10445/products/spectra/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 09:40:53 2011] ../../acisf10445/products/lightcurves/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.lc and ../../acisf10445/products/lightcurves/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 09:41:50 2011] Keeping rmf generated by specextract
[Wed Oct 19 09:41:50 2011] 162.153
[Wed Oct 19 09:44:19 2011] Updating aperture counts using extracted products
[Wed Oct 19 09:44:20 2011] Error reading totcts from fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 09:44:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:44:20 2011] Using photon index=1.80, rate=0.00401, arf fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 09:44:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:44:20 2011] Updating source flux to 5.8e-14
[Wed Oct 19 09:44:47 2011] Reading fit data from acisf10445/analysis//spectral/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 19 09:44:47 2011] Spectral fit parameter nH value = 4.46008e+13
[Wed Oct 19 09:44:47 2011] Spectral fit parameter PhoIndex value = 1.95679
[Wed Oct 19 09:44:47 2011] Failed to get F(0.3-8.0) from acisf10445/analysis//spectral/fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 09:44:47 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:44:47 2011] Using Nh = 4.5e+13, photon index=1.96, rate=0.00401, arf fullrun_ccd1_acisf10445_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 09:44:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:44:47 2011] Updating source flux to 5.9e-14