[Wed Oct 19 09:37:27 2011] Detection parameters:
  Position = (957.8, 730.8) = 9 13 52.39 41 5 56.5
  Extent = 2.5" x 1.8", rotation angle = 116 degrees
  Source counts = 165.9 +/- 14.0
  Background counts = 29.1
  Rate = 0.002 +/- 0.0002

[Wed Oct 19 09:37:29 2011] Off-axis axis estimate = 7.69'
[Wed Oct 19 09:38:41 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:38:41 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Wed Oct 19 09:38:41 2011] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.064
[Wed Oct 19 09:38:41 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.62"
[Wed Oct 19 09:38:42 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 09:38:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 09:38:42 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 09:38:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 09:38:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10445_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:38:42 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 09:38:42 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 09:38:42 2011] Fit fullrun_ccd0_acisf10445_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 09:38:55 2011] Spatial fit model total counts = 198.877000, observed total counts = 199.000000
[Wed Oct 19 09:38:55 2011] Offset between fit and detection position for source 3 = 1.151763 pixels
[Wed Oct 19 09:38:55 2011] 197.749700 total counts/ 21.769700 bgd. counts: snr = 37.716996
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.151763 pixels
  Position = (957.8, 731.9) = 9 13 52.41 41 5 56.9
  Extent = 2.7 (2.3-3.1)", rotation angle = 0
  Source counts = 176.0 +/- 14.1
  Background counts = 21.8
  Rate = 0.002 +/- 0.0002
[Wed Oct 19 09:38:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:38:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:38:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:38:55 2011] Source does appear to be extended
[Wed Oct 19 09:38:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:39:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:39:27 2011] Initial guess for spatial extent in simple fitting = 2.67"
[Wed Oct 19 09:39:27 2011] source mask rpix=5.4, npix_max = 140, mask sum = 144, frac = 1.025
[Wed Oct 19 09:39:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.67"
[Wed Oct 19 09:39:28 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 09:39:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 09:39:28 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 09:39:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 09:39:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10445_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:39:28 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 09:39:28 2011] fullrun_ccd0_acisf10445_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 09:39:28 2011] Fit fullrun_ccd0_acisf10445_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 09:39:38 2011] Spatial fit model total counts = 196.841000, observed total counts = 197.000000
[Wed Oct 19 09:39:38 2011] Offset between fit and detection position for source 3 = 0.200146 pixels
[Wed Oct 19 09:39:38 2011] 196.273600 total counts/ 26.860600 bgd. counts: snr = 32.688040
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.200146 pixels
  Position = (957.7, 731.7) = 9 13 52.41 41 5 56.8
  Extent = 2.5 (2.2-3.0)", rotation angle = 0
  Source counts = 169.4 +/- 14.0
  Background counts = 26.9
  Rate = 0.002 +/- 0.0002
[Wed Oct 19 09:39:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:39:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:39:38 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:39:38 2011] Source does appear to be extended
[Wed Oct 19 09:39:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:40:05 2011] Not overwriting source region fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 19 09:40:05 2011] Extracting stamp from image fullrun_ccd0_acisf10445_pi14-548_cl_sm2.00.img.gz, (841, 615) - (1074, 848)
[Wed Oct 19 09:40:05 2011] Writing fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3.gif
[Wed Oct 19 09:40:11 2011] ../../acisf10445/products/events/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.evt and ../../acisf10445/products/events/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 19 09:40:11 2011] Size of ../../acisf10445/products/events/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.evt.gz[events] = 211 counts
[Wed Oct 19 09:40:11 2011] Mean chipx,y = (733.25, 354.85)
[Wed Oct 19 09:40:11 2011] Mean tdetx,y = (3415.85, 4398.75)
[Wed Oct 19 09:40:11 2011] chipx,y range = (697.00-765.00, 325.00-388.00)
[Wed Oct 19 09:40:11 2011] Size of ../../acisf10445/products/events/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 373 counts
[Wed Oct 19 09:40:11 2011] ../../acisf10445/products/images/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.img and ../../acisf10445/products/images/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 19 09:40:11 2011] ../../acisf10445/products/spectra/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.pi and ../../acisf10445/products/spectra/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct 19 09:40:14 2011] ../../acisf10445/products/lightcurves/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.lc and ../../acisf10445/products/lightcurves/fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 19 09:40:48 2011] Keeping rmf generated by specextract
[Wed Oct 19 09:40:48 2011] 173.598
[Wed Oct 19 09:44:19 2011] Updating aperture counts using extracted products
[Wed Oct 19 09:44:19 2011] Error reading totcts from fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 19 09:44:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:44:19 2011] Using photon index=1.80, rate=0.00223, arf fullrun_ccd0_acisf10445_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 09:44:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:44:19 2011] Updating source flux to 3e-14