[Wed Oct 19 22:42:46 2011] Detection parameters:
  Position = (455.6, 823.3) = 18 22 8.31 68 28 45.5
  Extent = 0.5" x 0.5", rotation angle = 114 degrees
  Source counts = 19.3 +/- 4.5
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Wed Oct 19 22:42:49 2011] Off-axis axis estimate = 5.13'
[Wed Oct 19 22:43:36 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 22:43:36 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Wed Oct 19 22:43:36 2011] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.664
[Wed Oct 19 22:43:36 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.23"
[Wed Oct 19 22:43:36 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 19 22:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 22:43:36 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 19 22:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 22:43:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10444_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 22:43:36 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 19 22:43:36 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 19 22:43:36 2011] Fit fullrun_ccd3_acisf10444_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct 19 22:43:47 2011] Spatial fit model total counts = 30.365900, observed total counts = 30.000000
[Wed Oct 19 22:43:47 2011] Offset between fit and detection position for source 1 = 0.507489 pixels
[Wed Oct 19 22:43:47 2011] 30.327697 total counts/ 0.375697 bgd. counts: snr = 48.866019
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.507489 pixels
  Position = (456.1, 823.4) = 18 22 8.31 68 28 45.3
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 30.0 +/- 5.5
  Background counts = 0.4
  Rate = 0.001 +/- 0.0002
[Wed Oct 19 22:43:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:43:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:43:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:43:47 2011] Source does appear to be extended
[Wed Oct 19 22:43:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:44:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 22:44:06 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Oct 19 22:44:06 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.569
[Wed Oct 19 22:44:06 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.88"
[Wed Oct 19 22:44:07 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct 19 22:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 22:44:07 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct 19 22:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 22:44:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10444_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 22:44:07 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct 19 22:44:07 2011] fullrun_ccd3_acisf10444_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct 19 22:44:07 2011] Fit fullrun_ccd3_acisf10444_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct 19 22:44:17 2011] Spatial fit model total counts = 31.530300, observed total counts = 30.000000
[Wed Oct 19 22:44:17 2011] Offset between fit and detection position for source 1 = 0.045821 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045821 pixels
  Position = (456.0, 823.3) = 18 22 8.32 68 28 45.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 31.4 +/- 5.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 22:44:17 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:44:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:44:17 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:44:17 2011] Source does appear to be extended
[Wed Oct 19 22:44:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:47:42 2011] Not overwriting source region fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 22:47:42 2011] Extracting stamp from image fullrun_ccd3_acisf10444_pi14-548_cl_sm2.00.img.gz, (414, 782) - (498, 865)
[Wed Oct 19 22:47:42 2011] Writing fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 22:47:55 2011] ../../acisf10444/products/events/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.evt and ../../acisf10444/products/events/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 22:47:55 2011] Size of ../../acisf10444/products/events/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.evt.gz[events] = 30 counts
[Wed Oct 19 22:47:55 2011] Mean chipx,y = (769.33, 395.63)
[Wed Oct 19 22:47:55 2011] Mean tdetx,y = (4736.37, 3830.33)
[Wed Oct 19 22:47:55 2011] chipx,y range = (752.00-786.00, 379.00-414.00)
[Wed Oct 19 22:47:55 2011] Size of ../../acisf10444/products/events/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Wed Oct 19 22:47:55 2011] ../../acisf10444/products/images/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.img and ../../acisf10444/products/images/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 22:47:55 2011] ../../acisf10444/products/spectra/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.pi and ../../acisf10444/products/spectra/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 22:47:55 2011] Not generating rmf since there are only 31 counts
[Wed Oct 19 22:47:58 2011] ../../acisf10444/products/lightcurves/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.lc and ../../acisf10444/products/lightcurves/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 22:49:11 2011] 182.45
[Wed Oct 19 22:49:20 2011] Updating aperture counts using extracted products
[Wed Oct 19 22:49:20 2011] Error reading totcts from fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 22:49:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 22:49:20 2011] Using photon index=1.80, rate=0.00141, arf fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 22:49:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 22:49:20 2011] Updating source flux to 1.8e-14
[Wed Oct 19 22:49:35 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 22:49:36 2011] acisf10444/analysis//spectral/fullrun_ccd3_acisf10444_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete