[Wed Oct 19 22:42:44 2011] Detection parameters:
  Position = (221.0, 624.8) = 18 20 57.04 68 26 31.5
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 33.3 +/- 5.8
  Background counts = 0.7
  Rate = 0.001 +/- 0.0003

[Wed Oct 19 22:42:46 2011] Off-axis axis estimate = 1.97'
[Wed Oct 19 22:43:33 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 22:43:33 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Wed Oct 19 22:43:33 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.801
[Wed Oct 19 22:43:33 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.43"
[Wed Oct 19 22:43:35 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 22:43:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 22:43:35 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 22:43:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 22:43:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10444_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 22:43:35 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 22:43:35 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 22:43:35 2011] Fit fullrun_ccd2_acisf10444_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 22:43:45 2011] Spatial fit model total counts = 37.120900, observed total counts = 37.000000
[Wed Oct 19 22:43:45 2011] Offset between fit and detection position for source 5 = 0.487616 pixels
[Wed Oct 19 22:43:45 2011] 37.256370 total counts/ 5.871570 bgd. counts: snr = 12.952161
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.487616 pixels
  Position = (221.2, 625.2) = 18 20 57.07 68 26 31.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.4 +/- 6.1
  Background counts = 5.9
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 22:43:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:43:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:43:45 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:43:45 2011] Source does appear to be extended
[Wed Oct 19 22:43:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:44:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 22:44:05 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Oct 19 22:44:05 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.090
[Wed Oct 19 22:44:05 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.46"
[Wed Oct 19 22:44:06 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 22:44:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 22:44:06 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 22:44:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 22:44:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10444_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 22:44:06 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 22:44:06 2011] fullrun_ccd2_acisf10444_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 22:44:06 2011] Fit fullrun_ccd2_acisf10444_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 22:44:16 2011] Spatial fit model total counts = 36.865100, observed total counts = 37.000000
[Wed Oct 19 22:44:16 2011] Offset between fit and detection position for source 5 = 0.005656 pixels
[Wed Oct 19 22:44:16 2011] 37.000340 total counts/ 5.625840 bgd. counts: snr = 13.227663
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.005656 pixels
  Position = (221.2, 625.2) = 18 20 57.07 68 26 31.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.4 +/- 6.1
  Background counts = 5.6
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 22:44:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:44:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:44:16 2011] Source does appear to be extended
[Wed Oct 19 22:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:45:44 2011] Not overwriting source region fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.reg
[Wed Oct 19 22:45:44 2011] Extracting stamp from image fullrun_ccd2_acisf10444_pi14-548_cl_sm2.00.img.gz, (200, 604) - (242, 646)
[Wed Oct 19 22:45:44 2011] Writing fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5.gif
[Wed Oct 19 22:45:55 2011] ../../acisf10444/products/events/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.evt and ../../acisf10444/products/events/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Oct 19 22:45:55 2011] Size of ../../acisf10444/products/events/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.evt.gz[events] = 33 counts
[Wed Oct 19 22:45:55 2011] Mean chipx,y = (462.97, 853.94)
[Wed Oct 19 22:45:55 2011] Mean tdetx,y = (3914.94, 3623.03)
[Wed Oct 19 22:45:55 2011] chipx,y range = (447.00-482.00, 837.00-872.00)
[Wed Oct 19 22:45:55 2011] Size of ../../acisf10444/products/events/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 4 counts
[Wed Oct 19 22:45:55 2011] ../../acisf10444/products/images/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.img and ../../acisf10444/products/images/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Oct 19 22:45:55 2011] ../../acisf10444/products/spectra/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.pi and ../../acisf10444/products/spectra/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Oct 19 22:45:55 2011] Not generating rmf since there are only 31 counts
[Wed Oct 19 22:45:58 2011] ../../acisf10444/products/lightcurves/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.lc and ../../acisf10444/products/lightcurves/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Oct 19 22:47:41 2011] 195.278
[Wed Oct 19 22:49:19 2011] Updating aperture counts using extracted products
[Wed Oct 19 22:49:19 2011] Error reading totcts from fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Oct 19 22:49:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 22:49:19 2011] Using photon index=1.80, rate=0.00141, arf fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5.arf
[Wed Oct 19 22:49:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 22:49:19 2011] Updating source flux to 1.6e-14
[Wed Oct 19 22:49:34 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 22:49:35 2011] acisf10444/analysis//spectral/fullrun_ccd2_acisf10444_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete