[Sat Oct 29 18:15:54 2011] Detection parameters:
  Position = (386.7, 816.0) = 8 25 59.45 4 15 8.0
  Extent = 0.7" x 0.6", rotation angle = 130 degrees
  Source counts = 13.7 +/- 4.4
  Background counts = 5.3
  Rate = 0.0006 +/- 0.0002

[Sat Oct 29 18:15:54 2011] Off-axis axis estimate = 1.74'
[Sat Oct 29 18:16:34 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:16:34 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct 29 18:16:34 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.851
[Sat Oct 29 18:16:34 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.41"
[Sat Oct 29 18:16:35 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 29 18:16:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 18:16:35 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 29 18:16:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 18:16:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10441_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:16:35 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 29 18:16:35 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 29 18:16:35 2011] Fit fullrun_ccd3_acisf10441_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 29 18:16:43 2011] Spatial fit model total counts = 30.000000, observed total counts = 30.000000
[Sat Oct 29 18:16:43 2011] Offset between fit and detection position for source 7 = 0.567990 pixels
[Sat Oct 29 18:16:43 2011] 29.486100 total counts/ 17.862300 bgd. counts: snr = 2.750296
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.567990 pixels
  Position = (386.5, 816.6) = 8 25 59.48 4 15 8.0
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 11.6 +/- 5.4
  Background counts = 17.9
  Rate = 0.0005 +/- 0.0003
[Sat Oct 29 18:16:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:16:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:16:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:16:43 2011] Source does appear to be extended
[Sat Oct 29 18:16:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:17:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:17:02 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 29 18:17:02 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.013
[Sat Oct 29 18:17:02 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.49"
[Sat Oct 29 18:17:03 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 29 18:17:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10.csv
[Sat Oct 29 18:17:03 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 29 18:17:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10.csv
[Sat Oct 29 18:17:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10441_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:17:03 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 29 18:17:03 2011] fullrun_ccd3_acisf10441_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 29 18:17:03 2011] Fit fullrun_ccd3_acisf10441_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 29 18:17:12 2011] Spatial fit model total counts = 29.962800, observed total counts = 30.000000
[Sat Oct 29 18:17:12 2011] Offset between fit and detection position for source 7 = 0.025446 pixels
[Sat Oct 29 18:17:12 2011] 28.774500 total counts/ 16.825900 bgd. counts: snr = 2.912915
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.025446 pixels
  Position = (386.5, 816.6) = 8 25 59.48 4 15 8.0
  Extent = 0.5 (0.3-1.4)", rotation angle = 0
  Source counts = 11.9 +/- 5.4
  Background counts = 16.8
  Rate = 0.0006 +/- 0.0003
[Sat Oct 29 18:17:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:17:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:17:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:17:12 2011] Source does appear to be extended
[Sat Oct 29 18:17:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:19:31 2011] Not overwriting source region fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.reg
[Sat Oct 29 18:19:31 2011] Extracting stamp from image fullrun_ccd3_acisf10441_pi14-548_cl_sm2.00.img.gz, (363, 793) - (410, 840)
[Sat Oct 29 18:19:31 2011] Writing fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7.gif
[Sat Oct 29 18:20:00 2011] ../../acisf10441/products/events/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.evt and ../../acisf10441/products/events/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Oct 29 18:20:00 2011] Size of ../../acisf10441/products/events/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.evt.gz[events] = 15 counts
[Sat Oct 29 18:20:00 2011] Mean chipx,y = (700.60, 812.27)
[Sat Oct 29 18:20:00 2011] Mean tdetx,y = (4319.73, 3761.60)
[Sat Oct 29 18:20:00 2011] chipx,y range = (686.00-719.00, 793.00-828.00)
[Sat Oct 29 18:20:00 2011] Size of ../../acisf10441/products/events/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 57 counts
[Sat Oct 29 18:20:01 2011] ../../acisf10441/products/images/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.img and ../../acisf10441/products/images/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Oct 29 18:20:01 2011] ../../acisf10441/products/spectra/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.pi and ../../acisf10441/products/spectra/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Oct 29 18:20:01 2011] Not generating rmf since there are only 11 counts
[Sat Oct 29 18:20:03 2011] ../../acisf10441/products/lightcurves/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.lc and ../../acisf10441/products/lightcurves/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Oct 29 18:20:07 2011] 201.771
[Sat Oct 29 18:20:14 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:20:14 2011] Error reading totcts from fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct 29 18:20:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:20:14 2011] Using photon index=1.80, rate=0.000558, arf fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7.arf
[Sat Oct 29 18:20:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:20:14 2011] Updating source flux to 6.5e-15
[Sat Oct 29 18:20:25 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 18:20:26 2011] acisf10441/analysis//spectral/fullrun_ccd3_acisf10441_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete