[Sun Oct 23 08:50:45 2011] Detection parameters:
  Position = (864.5, 472.3) = 1 41 57.79 21 32 36.4
  Extent = 0.6" x 0.5", rotation angle = 25 degrees
  Source counts = 114.0 +/- 10.8
  Background counts = 2.0
  Rate = 0.006 +/- 0.0005

[Sun Oct 23 08:50:47 2011] Off-axis axis estimate = 3.65'
[Sun Oct 23 08:51:25 2011] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 08:51:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 08:51:25 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sun Oct 23 08:51:25 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.016
[Sun Oct 23 08:51:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.73"
[Sun Oct 23 08:51:25 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 08:51:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 08:51:25 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 08:51:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 08:51:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10440_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 08:51:26 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 08:51:26 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 08:51:26 2011] Fit fullrun_ccd3_acisf10440_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 08:51:33 2011] Spatial fit model total counts = 117.763000, observed total counts = 120.000000
[Sun Oct 23 08:51:33 2011] Offset between fit and detection position for source 1 = 0.712644 pixels
[Sun Oct 23 08:51:33 2011] 117.316130 total counts/ 9.787130 bgd. counts: snr = 34.371456
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.712644 pixels
  Position = (865.0, 472.8) = 1 41 57.79 21 32 36.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 107.5 +/- 10.8
  Background counts = 9.8
  Rate = 0.005 +/- 0.0005
[Sun Oct 23 08:51:33 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 08:51:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 08:51:33 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 08:51:33 2011] Source does appear to be extended
[Sun Oct 23 08:51:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 08:51:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 08:51:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 08:51:49 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Oct 23 08:51:49 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.222
[Sun Oct 23 08:51:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.52"
[Sun Oct 23 08:51:50 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 08:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 08:51:50 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 08:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 08:51:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10440_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 08:51:50 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 08:51:50 2011] fullrun_ccd3_acisf10440_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 08:51:50 2011] Fit fullrun_ccd3_acisf10440_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 08:51:56 2011] Spatial fit model total counts = 119.255000, observed total counts = 119.000000
[Sun Oct 23 08:51:56 2011] Offset between fit and detection position for source 1 = 0.010615 pixels
[Sun Oct 23 08:51:56 2011] 118.657260 total counts/ 8.666260 bgd. counts: snr = 37.362962
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010615 pixels
  Position = (865.1, 472.8) = 1 41 57.79 21 32 36.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 110.0 +/- 10.9
  Background counts = 8.7
  Rate = 0.006 +/- 0.0005
[Sun Oct 23 08:51:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 08:51:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 08:51:56 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 08:51:56 2011] Source does appear to be extended
[Sun Oct 23 08:51:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 08:53:42 2011] Not overwriting source region fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 08:53:42 2011] Extracting stamp from image fullrun_ccd3_acisf10440_pi14-548_cl_sm2.00.img.gz, (841, 449) - (889, 496)
[Sun Oct 23 08:53:42 2011] Writing fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 08:53:44 2011] ../../acisf10440/products/events/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.evt and ../../acisf10440/products/events/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 08:53:44 2011] Size of ../../acisf10440/products/events/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.evt.gz[events] = 111 counts
[Sun Oct 23 08:53:44 2011] Mean chipx,y = (832.23, 595.04)
[Sun Oct 23 08:53:44 2011] Mean tdetx,y = (4536.96, 3893.23)
[Sun Oct 23 08:53:44 2011] chipx,y range = (814.00-852.00, 578.00-612.00)
[Sun Oct 23 08:53:44 2011] Size of ../../acisf10440/products/events/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Sun Oct 23 08:53:44 2011] ../../acisf10440/products/images/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.img and ../../acisf10440/products/images/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 08:53:44 2011] ../../acisf10440/products/spectra/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.pi and ../../acisf10440/products/spectra/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 08:53:47 2011] ../../acisf10440/products/lightcurves/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.lc and ../../acisf10440/products/lightcurves/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 08:54:55 2011] Keeping rmf generated by specextract
[Sun Oct 23 08:54:55 2011] 197.257
[Sun Oct 23 08:54:59 2011] Updating aperture counts using extracted products
[Sun Oct 23 08:54:59 2011] Error reading totcts from fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 08:54:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 08:54:59 2011] Using photon index=1.80, rate=0.00552, arf fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 08:54:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 08:54:59 2011] Updating source flux to 6.4e-14
[Sun Oct 23 08:55:09 2011] Reading fit data from acisf10440/analysis//spectral/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 08:55:09 2011] Spectral fit parameter nH value = 5.50512e+17
[Sun Oct 23 08:55:09 2011] Spectral fit parameter PhoIndex value = 1.81334
[Sun Oct 23 08:55:09 2011] Failed to get F(0.3-8.0) from acisf10440/analysis//spectral/fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 08:55:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 08:55:09 2011] Using Nh = 5.5e+17, photon index=1.81, rate=0.00552, arf fullrun_ccd3_acisf10440_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 08:55:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 08:55:09 2011] Updating source flux to 6.7e-14