[Sun Oct 23 08:50:43 2011] Detection parameters:
  Position = (652.0, 470.1) = 1 41 26.95 21 24 26.0
  Extent = 3.0" x 2.1", rotation angle = 148 degrees
  Source counts = 30.2 +/- 6.2
  Background counts = 8.8
  Rate = 0.002 +/- 0.0003

[Sun Oct 23 08:50:43 2011] Off-axis axis estimate = 9.30'
[Sun Oct 23 08:51:22 2011] Using EEF radius (= 3.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 08:51:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 08:51:22 2011] Initial guess for spatial extent in simple fitting = 3.83"
[Sun Oct 23 08:51:22 2011] source mask rpix=7.8, npix_max = 274, mask sum = 256, frac = 0.934
[Sun Oct 23 08:51:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.83"
[Sun Oct 23 08:51:23 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 08:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 08:51:23 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 08:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 08:51:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10440_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 08:51:23 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 08:51:23 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 08:51:23 2011] Fit fullrun_ccd0_acisf10440_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 08:51:30 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 44.645019 pixels away
[Sun Oct 23 08:51:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 08:51:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 08:51:30 2011] Assessing source extent using major
[Sun Oct 23 08:51:30 2011] Source does appear to be extended
[Sun Oct 23 08:51:30 2011] Computing asymmetry using major and minor axis, asym = 1.42
[Sun Oct 23 08:51:47 2011] Using EEF radius (= 3.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 08:51:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 08:51:47 2011] Initial guess for spatial extent in simple fitting = 3.83"
[Sun Oct 23 08:51:47 2011] source mask rpix=7.8, npix_max = 274, mask sum = 256, frac = 0.934
[Sun Oct 23 08:51:47 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.83"
[Sun Oct 23 08:51:47 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 08:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 08:51:47 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 08:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 08:51:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10440_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 08:51:48 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 08:51:48 2011] fullrun_ccd0_acisf10440_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 08:51:48 2011] Fit fullrun_ccd0_acisf10440_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 08:51:54 2011] Spatial fit model total counts = 79.877900, observed total counts = 79.000000
[Sun Oct 23 08:51:54 2011] Offset between fit and detection position for source 1 = 9.778574 pixels
[Sun Oct 23 08:51:54 2011] 79.516400 total counts/ 17.382000 bgd. counts: snr = 14.903293
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 9.778574 pixels
  Position = (661.3, 467.0) = 1 41 26.64 21 24 24.2
  Extent = 4.3 (3.5-5.5)", rotation angle = 0
  Source counts = 62.1 +/- 8.9
  Background counts = 17.4
  Rate = 0.003 +/- 0.0004
[Sun Oct 23 08:51:54 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 08:51:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 08:51:54 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 08:51:54 2011] Source does appear to be extended
[Sun Oct 23 08:51:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 08:52:10 2011] Not overwriting source region fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 08:52:10 2011] Extracting stamp from image fullrun_ccd0_acisf10440_pi14-548_cl_sm2.00.img.gz, (463, 269) - (859, 665)
[Sun Oct 23 08:52:10 2011] Writing fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 08:52:11 2011] ../../acisf10440/products/events/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.evt and ../../acisf10440/products/events/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 08:52:11 2011] Size of ../../acisf10440/products/events/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Sun Oct 23 08:52:11 2011] Mean chipx,y = (404.50, 434.10)
[Sun Oct 23 08:52:11 2011] Mean tdetx,y = (3495.10, 4727.50)
[Sun Oct 23 08:52:11 2011] chipx,y range = (360.00-441.00, 386.00-466.00)
[Sun Oct 23 08:52:11 2011] Size of ../../acisf10440/products/events/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 263 counts
[Sun Oct 23 08:52:11 2011] ../../acisf10440/products/images/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.img and ../../acisf10440/products/images/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 08:52:11 2011] ../../acisf10440/products/spectra/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.pi and ../../acisf10440/products/spectra/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 08:52:11 2011] Not generating rmf since there are only 62 counts
[Sun Oct 23 08:52:14 2011] ../../acisf10440/products/lightcurves/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.lc and ../../acisf10440/products/lightcurves/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 08:52:40 2011] 165.864
[Sun Oct 23 08:54:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 08:54:58 2011] Error reading totcts from fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 08:54:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 08:54:58 2011] Using photon index=1.80, rate=0.00312, arf fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 08:54:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 08:54:58 2011] Updating source flux to 4.2e-14
[Sun Oct 23 08:55:02 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 08:55:03 2011] acisf10440/analysis//spectral/fullrun_ccd0_acisf10440_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete