[Fri Oct 14 23:23:13 2011] Detection parameters:
  Position = (551.9, 413.3) = 22 48 30.87 -16 10 30.4
  Extent = 0.5" x 0.5", rotation angle = 132 degrees
  Source counts = 108.3 +/- 10.6
  Background counts = 3.7
  Rate = 0.005 +/- 0.0005

[Fri Oct 14 23:23:13 2011] Off-axis axis estimate = 6.30'
[Fri Oct 14 23:24:10 2011] Using EEF radius (= 1.78 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:24:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:24:10 2011] Initial guess for spatial extent in simple fitting = 1.78"
[Fri Oct 14 23:24:10 2011] source mask rpix=3.6, npix_max = 68, mask sum = 56, frac = 0.822
[Fri Oct 14 23:24:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.78"
[Fri Oct 14 23:24:10 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 23:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 23:24:10 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 23:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 23:24:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10439_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:24:11 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 23:24:11 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:24:11 2011] Fit fullrun_ccd3_acisf10439_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 23:24:25 2011] Spatial fit model total counts = 205.634000, observed total counts = 204.000000
[Fri Oct 14 23:24:25 2011] Offset between fit and detection position for source 17 = 2.376753 pixels
[Fri Oct 14 23:24:25 2011] 205.996900 total counts/ 18.518900 bgd. counts: snr = 43.565502
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.376753 pixels
  Position = (554.2, 413.5) = 22 48 30.80 -16 10 30.6
  Extent = 1.2 (1.1-1.4)", rotation angle = 0
  Source counts = 187.5 +/- 14.4
  Background counts = 18.5
  Rate = 0.009 +/- 0.0007
[Fri Oct 14 23:24:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:24:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:24:25 2011] Source does appear to be extended
[Fri Oct 14 23:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:24:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:24:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:24:45 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Oct 14 23:24:45 2011] source mask rpix=2.5, npix_max = 36, mask sum = 29, frac = 0.789
[Fri Oct 14 23:24:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.25"
[Fri Oct 14 23:24:46 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 23:24:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:24:46 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 23:24:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 23:24:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10439_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:24:46 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 23:24:46 2011] fullrun_ccd3_acisf10439_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 23:24:46 2011] Fit fullrun_ccd3_acisf10439_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 23:24:54 2011] Spatial fit model total counts = 202.135000, observed total counts = 198.000000
[Fri Oct 14 23:24:54 2011] Offset between fit and detection position for source 17 = 0.098744 pixels
[Fri Oct 14 23:24:54 2011] 203.329800 total counts/ 26.757800 bgd. counts: snr = 34.134743
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.098744 pixels
  Position = (554.2, 413.5) = 22 48 30.80 -16 10 30.6
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 176.6 +/- 14.3
  Background counts = 26.8
  Rate = 0.009 +/- 0.0007
[Fri Oct 14 23:24:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:24:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:24:54 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:24:54 2011] Source does appear to be extended
[Fri Oct 14 23:24:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:27:44 2011] Not overwriting source region fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.reg
[Fri Oct 14 23:27:44 2011] Extracting stamp from image fullrun_ccd3_acisf10439_pi14-548_cl_sm2.00.img.gz, (503, 363) - (605, 464)
[Fri Oct 14 23:27:44 2011] Writing fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17.gif
[Fri Oct 14 23:27:45 2011] ../../acisf10439/products/events/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.evt and ../../acisf10439/products/events/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Fri Oct 14 23:27:45 2011] Size of ../../acisf10439/products/events/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.evt.gz[events] = 193 counts
[Fri Oct 14 23:27:45 2011] Mean chipx,y = (534.49, 269.73)
[Fri Oct 14 23:27:45 2011] Mean tdetx,y = (4862.27, 3595.49)
[Fri Oct 14 23:27:45 2011] chipx,y range = (516.00-554.00, 248.00-291.00)
[Fri Oct 14 23:27:45 2011] Size of ../../acisf10439/products/events/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 24 counts
[Fri Oct 14 23:27:45 2011] ../../acisf10439/products/images/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.img and ../../acisf10439/products/images/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Fri Oct 14 23:27:45 2011] ../../acisf10439/products/spectra/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.pi and ../../acisf10439/products/spectra/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Fri Oct 14 23:27:49 2011] ../../acisf10439/products/lightcurves/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.lc and ../../acisf10439/products/lightcurves/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Fri Oct 14 23:28:33 2011] Keeping rmf generated by specextract
[Fri Oct 14 23:28:33 2011] 177.574
[Fri Oct 14 23:28:41 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:28:41 2011] Error reading totcts from fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Oct 14 23:28:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:28:41 2011] Using photon index=1.80, rate=0.00893, arf fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17.arf
[Fri Oct 14 23:28:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:28:41 2011] Updating source flux to 1.2e-13
[Fri Oct 14 23:28:53 2011] Reading fit data from acisf10439/analysis//spectral/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_pl.csv
[Fri Oct 14 23:28:53 2011] Spectral fit parameter nH value = 4.1823e+21
[Fri Oct 14 23:28:53 2011] Spectral fit parameter PhoIndex value = 2.16106
[Fri Oct 14 23:28:53 2011] Failed to get F(0.3-8.0) from acisf10439/analysis//spectral/fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 23:28:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:28:53 2011] Using Nh = 4.2e+21, photon index=2.16, rate=0.00893, arf fullrun_ccd3_acisf10439_pi14-548_pass1_cl_src17.arf
[Fri Oct 14 23:28:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:28:53 2011] Updating source flux to 1e-13